Prefix Utilization

Prefix Utilization

This alarm monitors the capacity of a prefix and is triggered when the maximum percentage of total capacity of a single prefix on a monitored interface is exceeded. To configure this alarm, do the following:

Procedure

Step 1

In the main window, click Crosswork Cloud Traffic Analysis icon > Configure > Policies.

Step 2

Click Add Policy.

Step 3

Enter a policy name in the Name field.

Step 4

Under Triggers, click Add Rules.

Step 5

Click Prefix Utilization.

Step 6

Click Next.

Step 7

By default, the rule is enabled. Toggle the switch to DISABLED if you do not want to activate the rule yet.

Step 8

Use the slider to indicate the utilization range that will trigger this alarm. Crosswork Cloud will send a notification if utilization is within the range indicated by the color red and ALARM text.

Step 9

Under the Severity drop-down list, select the severity level you want defined for this alarm.

Step 10

Make any other necessary interface and endpoint notification configurations, then click Save.