Cisco Spaces: IoT Service Configuration Guide (Wireless)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: August 2, 2024

Open Ports

Information About Open Ports (Wireless)

This chapter lists the connector ports that need to be open for the proper functioning of various services or protocols.

The following ports need to be opened to allow for the basic functionality of Cisco Spaces.

Table 1. Setups
Setup Type	Primary IP Address	Disaster Recovery
US Setup	52.20.144.155 34.231.154.95	54.176.92.81 54.183.58.225
EU Setup	63.33.127.190 63.33.175.64	3.122.15.26 3.122.15.7
Singapore Setup (SG)	13.228.159.49 54.179.105.241	13.214.251.223 54.255.57.46

In addition to basic functionality, additional ports need to be opened for other additional functionality like guest onboarding and IoT Services.

The following ports need to be opened for configuring IoT Services (wireless). To configure IoT Services (wired), see Open Ports (Wired)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)