AP as a Sensor

AP as a Sensor

You can now configure the following access points as sensors:

  • Cisco Catalyst 9136 Series Access Points

  • Cisco Catalyst Wireless 9166I Series Access Points

Once configured as a sensor, you can collect telemetry data using this AP. The following sensor values can be configured:

  • Temperature

  • Relative humidity

  • Total volatile organic compound (TVOC), and

  • Indoor air quality

Enabling or Disabling an AP Sensor

Procedure

Step 1

Navigate to Cisco Spaces: IoT Service > Device Management > Devices > AP Beacons > Sensor.

Figure 1. AP as a Sensor

Step 2

Click the AP that you want to configure as a sensor.

The AP Beacons details page opens.

Step 3

In the Settings area, click Sensor to enable or disable the AP as a sensor.

Figure 2. Enabling or Disabling AP as a Sensor

Viewing Sensor Information

You can view sensor information from the Sensor Information area.

Figure 3. Viewing Sensor Information