- fltExtpolProviderProviderLostConnectivity
- fltExtpolControllerControllerLostConnectivity
- fltExtpolClientClientLostConnectivity
- fltExtpolRegistryServiceRegistryVersionMismatch
- fltExtpolProviderProviderVersionMismatch
- fltExtpolControllerControllerVersionMismatch
- fltExtpolClientClientVersionMismatch
- fltCommSvcEpCommSvcNotDeployed
- fltLicenseInstanceGracePeriodWarning1
- fltLicenseInstanceGracePeriodWarning2
- fltLicenseInstanceGracePeriodWarning3
- fltLicenseInstanceGracePeriodWarning4
- fltLicenseInstanceGracePeriodWarning5
- fltLicenseInstanceGracePeriodWarning6
- fltLicenseInstanceGracePeriodWarning7
- fltLicenseFileBadLicenseFile
- fltLicenseFileFileNotDeleted
- fltExtpolClientGracePeriodWarning
- fltExtpolClientGracePeriodWarning2
- fltExtpolClientGracePeriodWarning3
- fltExtpolClientGracePeriodWarning4
- fltExtpolClientGracePeriodWarning5
- fltExtpolClientGracePeriodWarning6
- fltExtpolClientGracePeriodWarning7
- fltExtpolClientGracePeriodWarning1
- fltPkiTPStatus
- fltPkiKeyRingStatus
- fltExtpolClientClientNotReachable
Service Registry Faults
fltExtpolProviderProviderLostConnectivity
Service provider ([capability], [ip], [ipv6]) lost connectivity
This provider is not reachable from UCS Central registry. This fault typically occurs if the provider process has crashed or too busy to respond to hearbeat message sent by registry.
If you see this fault, take the following actions:
Step 1
In the Cisco UCS Central CLI, check the provider process state through show pmon state in local-mgmt shell. You can check the same information through GUI from Administrator in UCS Central.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolControllerControllerLostConnectivity
Management controller ([capability], [ip], [ipv6]) lost connectivity
This controller is not reachable from UCS Central registry. This fault typically occurs if the controller process has crashed or too busy to respond to hearbeat message sent by registry.
If you see this fault, take the following actions:
Step 1 In the Cisco UCS Central CLI, check the provider process state through show pmon state in local-mgmt shell. You can check the same information through GUI from Administrator in UCS Central.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolClientClientLostConnectivity
Managed endpoint ([capability], [ip], [ipv6]) lost connectivity
This registered UCS Domain is not reachable from UCS Central registry. This fault typically occurs if the UCS Domain has lost network access or UCS Domain DME process has crashed or too busy to respond to hearbeat message sent by registry.
If you see this fault, take the following actions:
Step 1 In the Cisco UCS Central CLI, check the client process state through show clients detail in service-reg shell. You can check the same information through GUI from Administrator in UCS Central.
Step 2 Check the network connectivity from UCS domain to UCS Central. Also check, if UCSM is busy processing a bulkier, lengthy transaction.
Step 3 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolRegistryServiceRegistryVersionMismatch
Service Registry ([capability], [ip], [ipv6]) software version is not compatible
UCS Central regsitry is not running the compatible version in the package.
If you see this fault, take the following actions:
Step 1 Upgrade to a valid UCS Central package or contact Cisco TAC.
fltExtpolProviderProviderVersionMismatch
Service provider ([capability], [ip], [ipv6]) software version is not compatible
UCS Central provider is not running the compatible version in the package.
If you see this fault, take the following actions:
Step 1 Upgrade to a valid UCS Central package or contact Cisco TAC.
fltExtpolControllerControllerVersionMismatch
Management controller ([capability], [ip], [ipv6]) software version is not compatible
UCS Central controller is not running the compatible version in the package.
If you see this fault, take the following actions:
Step 1 Upgrade to a valid UCS Central package or contact Cisco TAC.
fltExtpolClientClientVersionMismatch
Managed endpoint ([capability], [ip], [ipv6]) software version is not compatible
UCS Domain is not running the compatible software version to UCS Central.
If you see this fault, take the following actions:
Step 1 Upgrade UCS Domain to a compatible version, in order to get it registered with UCS Central.
fltCommSvcEpCommSvcNotDeployed
Communication Service configuration can’t be deployed. Error: [configStatusMessage]
This fault typically occurs because Cisco UCS Manager has detected an invalid communication policy confiuration.
If you see this fault, take the following actions:
Step 1 Verify that ports configured across all communication services is unique.
fltLicenseInstanceGracePeriodWarning1
license for feature [feature] on UCS Central [scope] has entered into the grace period.
At lease one UCS domain is registered with UCS Central without having a license. This fault typically occurs if one or more UCS domains are registered with UCS Central after all default (and procured) licenses are asigned to other UCS domains.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and cosumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Admin tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under license scope from service-reg session.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltLicenseInstanceGracePeriodWarning2
license for feature [feature] on UCS Central [scope] is running in the grace period for more than 10 days
At least one UCS domain is registered with UCS Central without having a license. This fault typically occurs if one or more UCS domains are registered with UCS Central after all default (and procured) licenses are asigned to other UCS domains.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Admin tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltLicenseInstanceGracePeriodWarning3
license for feature [feature] on UCS Central [scope] is running in the grace period for more than 30 days
At least one UCS Domain with UCS Central has been running in the grace period for more than 30 days. This fault typically occurs if one or more UCS domains are registered with UCS Central after all default (and procured) licenses are asigned to other UCS domains and the unlicensed UCS Domains have been running for more than 120 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Manager GUI, you can access the licensing information from the Admin tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltLicenseInstanceGracePeriodWarning4
license for feature [feature] on UCS Central [scope] is running in the grace period for more than 60 days
At least one UCS Domain with UCS Central has been running in the grace period for more than 60 days. This fault typically occurs if one or more UCS domains are registered with UCS Central after all default (and procured) licenses are asigned to other UCS domains and the unlicensed UCS Domains have been running for more than 60 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Centralt. In the Cisco UCS Central GUI, you can access the licensing information from the Admin tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltLicenseInstanceGracePeriodWarning5
license for feature [feature] on UCS Central [scope] is running in the grace period for more than 90 days
At least one UCS Domain with UCS Central has been running in the grace period for more than 90 days. This fault typically occurs if one or more UCS domains are registered with UCS Central after all default (and procured) licenses are asigned to other UCS domains and the unlicensed UCS Domains have been running for more than 90 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed by UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Admin tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltLicenseInstanceGracePeriodWarning6
license for feature [feature] on UCS Central [scope] is running in the grace period for more than 119 days
At least one UCS Domain with UCS Central has been running in the grace period for more than 119 days. This fault typically occurs if one or more UCS domains are registered with UCS Central after all default (and procured) licenses are asigned to other UCS domains and the unlicensed UCS Domains have been running for more than 119 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Admin tab for UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltLicenseInstanceGracePeriodWarning7
Grace period for feature [feature] on UCS Central [scope] is expired. Please acquire a license for the same.
At least one UCS Domain with UCS Central has been running in the grace period for more than 120 days. UCS domains are registered with UCS Central after all default (and procured) licenses are asigned to other UCS domains and the unlicensed UCS Domains have been running for more than 120 days. At this stage, the system licensing state is set to expired.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Admin tab for UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 Disable the unlicensed UCS Domains to bring the number of enabled Domains down to the number of total licenses.
Step 3 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC immediately to procure more licenses.
fltLicenseFileBadLicenseFile
license file [name] on UCS Central [scope] can not be installed
The installation of a license file on UCS Central failed. This fault typically occurs if the license file is badly formatted or its host ID does not match that of the UCS Domain.
If you see this fault, take the following actions:
Step 1 In the Cisco UCS Central CLI, check the host IDs for UCS Domains. You can access the host ID information by entering the show server-host-id detail command under the license scope.
Step 2 Match the host IDs with the contents of the license file. If the host ID matches that of one of the UCS Domain, create a show tech-support file and contact Cisco TAC. If it does not match, contact Cisco TAC to obtain the correct license File.
fltLicenseFileFileNotDeleted
license file [name] from UCS Central [scope] could not be deleted
The deletion of a license file on UCS Central has failed. This fault typically occurs if license framework is not able to delete a file.
If you see this fault, create a show tech-support file and contact Cisco TAC.
fltExtpolClientGracePeriodWarning
UCS domain [name] registered with UCS Central has entered into the grace period.
A UCS domain is registered with UCS Central without having a license. This fault typically occurs if this UCS domain is registered with UCS Central after all default (and procured) licenses are assigned to other UCS domains.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Operations Management tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under license scope from service-reg session.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolClientGracePeriodWarning2
UCS Domain [name] registered with UCS Central is running in the grace period for more than 10 days
This UCS domain is registered with UCS Central without having a license. This fault typically occurs if this UCS domain is registered with UCS Central after all default (and procured) licenses are assigned to other UCS domains.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Operations Management tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolClientGracePeriodWarning3
UCS Domain [name] registered with UCS Central is running in the grace period for more than 30 days
This UCS Domain registered with UCS Central has been running in the grace period for more than 30 days. This fault typically occurs if this UCS domain is registered with UCS Central after all default (and procured) licenses are assigned to other UCS domains and the unlicensed UCS Domains have been running for more than 120 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Manager GUI, you can access the licensing information from the Operations Management tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolClientGracePeriodWarning4
UCS Domain [name] registered with UCS Central is running in the grace period for more than 60 days
This UCS Domain registered with UCS Central has been running in the grace period for more than 60 days. This fault typically occurs if this UCS domain is registered with UCS Central after all default (and procured) licenses are assigned to other UCS domains and the unlicensed UCS Domains have been running for more than 60 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Operations Management tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolClientGracePeriodWarning5
UCS Domain [name] registered with UCS Central is running in the grace period for more than 90 days
This UCS Domain registered with UCS Central has been running in the grace period for more than 90 days. This fault typically occurs if this UCS domains is registered with UCS Central after all default (and procured) licenses are assigned to other UCS domains and the unlicensed UCS Domains have been running for more than 90 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed by UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Operations Management tab for the UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolClientGracePeriodWarning6
UCS Domain [name] registered with UCS Central is running in the grace period for more than 119 days
This UCS Domain registered with UCS Central has been running in the grace period for more than 119 days. This fault typically occurs if this UCS domain is registered with UCS Central after all default (and procured) licenses are assigned to other UCS domains and the unlicensed UCS Domains have been running for more than 119 days.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Operations Management tab for UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltExtpolClientGracePeriodWarning7
Grace period for UCS Domain [name] registered with UCS Central has expired. Please acquire a license for the same.
This UCS Domain registered with UCS Central has been running in the grace period for more than 120 days. UCS domains are registered with UCS Central after all default (and procured) licenses are assigned to other UCS domains and the unlicensed UCS Domains have been running for more than 120 days. At this stage, the system licensing state is set to expired.
If you see this fault, take the following actions:
Step 1 Check the number of licenses installed and consumed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Operations Management tab for UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 Disable the unlicensed UCS Domains to bring the number of enabled Domains down to the number of total licenses.
Step 3 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC immediately to procure more licenses.
fltExtpolClientGracePeriodWarning1
UCS Domain [name] is registered with UCS Central without a valid license.
This UCS domain is registered with UCS Central without having a license. This fault typically occurs if this UCS domain is registered with UCS Central without the initial activation license and after all default licenses are assigned to other UCS domains.
If you see this fault, take the following actions:
Step 1 Check if the initial activation license is installed on UCS Central. In the Cisco UCS Central GUI, you can access the licensing information from the Operations Management tab for UCS Central. In the Cisco UCS Central CLI, you can access the licensing information by entering the show usage detail command under the license scope.
Step 2 Disable the unlicensed UCS Domains to bring the number of enabled Domains down to the number of total licenses.
Step 3 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC immediately to procure more licenses.
fltPkiTPStatus
[name] Trustpoint’s cert-chain is invalid, reason: [certStatus].
This fault occurs when certificate status of TrustPoint has become invalid.
If you see this fault, take the following actions:
Step 1 Identify the Trustpoint(s) affected.
Step 2 For affected trust-points, delete those keyrings using this trustpoint. Obtain new CA certificate and install.
fltPkiKeyRingStatus
[name] Keyring’s certificate is invalid, reason: [certStatus].
This fault occurs when certificate status of Keyring has become invalid.
If you see this fault, take the following actions:
Step 1 Identify the keyring(s) affected.
Step 2 If default keyring certificate is affected, regenerate the certificate.
Step 3 For other keyrings create new cert-req and get it signed by CA and set to keyring.
fltExtpolClientClientNotReachable
Managed endpoint ([capability], [ip], [ipv6]) is not reachable
This registered UCS Domain is not reachable from UCS Central registry. This fault typically occurs if the UCS Domain has lost network access.
If you see this fault, take the following actions:
Step 1 In the Cisco UCS Central CLI, check the client process state through show clients detail in service-reg shell. You can check the same information through GUI from Administrator in UCS Central.
Step 2 Check the network connectivity from UCS domain to UCS Central.
Step 3 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
Feedback