Upgrade Package Commands

show system upgrade apply-image

Use the show system upgrade apply-image command in privileged EXEC mode to verify the upgrade status of the Cisco Enterprise NFVIS image.

show system upgrade apply-image

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.5.1

This command was introduced.

Examples

The following is a sample output of the show system upgrade apply-image command: 


nfvis# show system upgrade apply-image 
NAME                     STATUS 
 ------------------------------------------------------
  nfvis-3.3.1           success

show system upgrade reg-info

Use the show system upgrade reg-info command in the privileged EXEC mode to verify the Cisco Enterprise NFVIS image registration. Package status must be valid for the registered image.

show system upgrade reg-info [ name package-name ]

Syntax Description

name package-name

(Optional) Specifies the VM image package.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.5.1

This command was introduced.

Examples

The following is a sample output of the show system upgrade reg-info command: 


nfvis# show system upgrade reg-info
PACKAGE
NAME         LOCATION            VERSION  STATUS     UPLOAD DATE
------------------------------------------------------------------------
nfvis-3.3.1 /data/upgrade/package 3.4.391 Valid 2016-08-10T11:57:48.711422-00:00

The table below describes the significant fields shown in the display:

Table 1. show system upgrade reg-info Field Description

Field

Description

PACKAGE NAME

 Name of the image

LOCATION

Default or non-default location of the image

VERSION

Image version

STATUS

Image status

system upgrade apply-image

To upgrade to a registered Cisco Enterprise NFVIS image, use the system upgrade apply-image command in global configuration mode. To cancel the upgrade, use the no form of this command.

system upgrade apply-image image-name scheduled-time hours [ auto-restore ] [ sys-backup] [ vm-backup]

no system upgrade apply-image

Syntax Description

image-name

Specifies the image name.
scheduled-time hours

Specifies the time of upgrade in hours. The valid range is from 0 to 24 hours.

auto-restore

(Optional) Restores the previous image if the upgrade fails.

sys-backup

(Optional) Backs up the ConfD database.

vm-backup

(Optional) backs up the VM.

Command Default

None

Command Modes

Global configuration (config)

Command History

Release Modification
3.5.1

This command was introduced.

Examples

The following example shows how to upgrade to a registered Cisco Enterprise NFVIS image:


nfvis(config)# system upgrade image-name nfvis-3.3.1
nfvis(config-image-name-nfvis-3.3.1)# system upgrade apply-image scheduled-time 21
nfvis(config-image-name-nfvis-3.3.1)# commit

system upgrade image-name

To register the Cisco Enterprise NFVIS upgrade image on the host server, use the system upgrade image-name command in global configuration mode. To remove the registration, use the no form of this command.

system upgrade image-name upgrade-name [location] [default-location | non-default-location]

no system upgrade image-name upgrade-name

Syntax Description

upgrade-name

Name of the upgrade

location

(Optional) Specifies the location of the image.

default-location

(Optional) Specifies the default location (/data/upgrade/package) of the upgrade image.

non-default-location

(Optional) Specifies the complete path of the folder that contains the upgrade image. This is other than the default location.

Command Default

None

Command Modes

Global configuration (config)

Command History

Release Modification
3.5.1

This command was introduced.

Usage Guidelines

Ensure that you download or copy the image to the NFVIS server default target directory "/data/upgrade/package" before starting the upgrade process. If the image is downloaded or copied to a location other than the default directory, you will have to specify the exact path of the image when registering the image.

Examples

The following example shows how to register the Cisco Enterprise NFVIS upgrade image on the host server: 


nfvis(config)# system upgrade image-name nfvis-3.3.1
nfvis(config-image-name-nfvis-3.3.1)# system upgrade image-name nfvis1 location /data/upgrade/package
nfvis(config-image-name-nfvis-3.3.1)# commit