Storage Virtualization Commands

cluster datastore intdatastore

To create a cluster, to do a cold migration of VMs, use the cluster datastore intdatastore command in privileged EXEC mode. To delete a cluster, use the no form of the command.

cluster cluster name { datastore | [ | intdatastore | | | extdatastore1 | | | extdatastore2 | ] | size | | size number | node | ipv4 address addresstype ipv4 | | node | ipv4 address addresstype ipv4 | | node | ipv4 address addresstype ipv4 }

no cluster cluster name

Syntax Description

cluster cluster name

Specifies the name of the cluster.
datastore intdatastore| extdatastore1| extdatastore2

Specifies the datastore to be selected for creating a cluster.
size size number

Specifies the size of the datastore.
node

Specifies the address and address type of the device in the cluster.

Note

Three nodes must be added to the configuration, for the commit to be successful.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

4.8.1

This command was introduced.

Examples


nfvis(config)# cluster cluster1 datastore intdatastore size 10 
nfvis(config-cluster-test)#node 209.165.200.225 address-type ipv4 
nfvis(config-node-209.165.200.254)#exit 
nfvis(config-cluster-test)#node 209.165.201.31 address-type ipv4 
nfvis(config-node-209.165.200.224)#exit 
nfvis(config-cluster-test)#node 209.165.201.1 address-type ipv4 
nfvis(config-node-209.165.202.129)#commit

cluster migrate-deployment

To migrate deployments from a source node to a destination node, use the cluster migrate-deployment command in privileged EXEC mode.

cluster cluster name { migrate-deployment | | source-node | | ip address | | destination node | | ip address | [ | all-deployments | | deployment-list | ] }

Syntax Description

cluster cluster name

Specifies the cluster in which the deployments must be migrated.
source-node ip address

Specifies the node from which the deployment must be migrated.
destination node ip address

Specifies the node to which the deployment must be migrated.
all-deployments

Specifies that all deployments in the cluster need to be migrated.
deployment-list

Specifies the deployments to by migrated.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

4.8.1

This command was introduced.

Examples

nfvis# cluster test migrate-deployment source-node 209.165.200.225 destination-node 209.165.201.31 all-deployments
nfvis# cluster test migrate-deployment source-node 209.165.200.225 destination-node 209.165.201.31 deployment-list [ centosvm4 centosvm5 ]