Mobility Express Controller Commands

Application Visibility Commands

The following commands are used to configure Application Visibility on the Cisco Mobility Express controller.

Command

Description

Added in Release

config flexconnect group default-flexgroup avc 1 visibility { enable | disable }

To enable or disable Application Visibility in a WLAN

8.1.122.0

show flexconnect group detail default-flexgroup

To display the status of Application Visibility in each WLAN

8.1.122.0

show flexconnect avc statistics group default-flexgroup

To view Application Visibility statistics based on the flex group

8.1.122.0

show flexconnect avc statistics client client_MAC

To view Application Visibility statistics based on each client

8.1.122.0

Commands for Collecting Log, Core, and Crash Files

Command

Description

Added in Release

  1. transfer upload datatype support-bundle

  2. transfer upload mode { tftp | ftp }

  3. transfer upload username username password password

    This command is only for an FTP transfer.

  4. transfer upload filename filename

  5. transfer upload path file_path

  6. transfer upload serverip server_ip_address

  7. transfer upload start

Use these commands in sequence to collect log, core and crash files.

The files of the following data types are collected, bundled into a .TAR file, and the uploaded to a configured TFTP or FTP server:

  • run-config

  • systemtrace

  • traplog

  • debug-file

  • crashfile

  • coredump

  • ap-crash-data

8.3.102.0

debug transfer all enable

To debug the code-flow, use this command before the transfer upload start command.

8.3.102.0

debug disable-all

To disable debugging of the code-flow.

8.3.102.0

Commands for Software Download from Cisco.com

Step

Command

Description

Added in Release

1

transfer download ap-images mode cco

To set the mode of download of software images to be from Cisco.com.

8.3.102.0

2

transfer download ap-images cco-username username cco-password password

To specify the Cisco.com credentials to be used.

8.3.102.0

3

transfer download ap-images version { suggested | latest }

To specify whether the suggested or the latest software version images are to be downloaded.

8.3.102.0

4

transfer download ap-images cco-auto-check { enable | disable }

To set the controller to automatically check for software image updates from Cisco.com.

8.3.102.0

5

transfer download start

To start the download.

8.3.102.0

CleanAir Commands

Command

Description

Added in Release

config 802.11b cleanair enable ap_MAC

To enable CleanAir on an associated AP. Not applicable to 1850 and 1830 series APs.

8.1.122.0

show 802.11b cleanair device ap ap_MAC

To list all the interference devices connected to the AP.

8.1.122.0

show 802.11b cleanair device type jammer

To jam a specific interference device.

8.1.122.0

CMX Cloud Commands

Command

Description

Added in Release

config cloud-services server id-token CMX_token

To specify a valid CMX server token.

8.3.102.0

config cloud-services server url url

To specify a valid CMX server URL.

8.3.102.0

config cloud-services cmx enable

To enable CMX analytics.

8.3.102.0

show cloud-services cmx summary

To view details of the configured CMX cloud services.

8.3.102.0

Controller Image Upgrade Commands

The following commands are used when performing a Mobility Express controller software image upgrade.

Command

Description

Added in Release

transfer download ap-images imagePath image_path

To set the path of the software image on the TFTP server

8.1.122.0

transfer download ap-images mode tftp

To set the file transfer mode as TFTP

8.1.122.0

transfer download ap-images serverIp ipv4_address

To specify the IP address of the TFTP server

8.1.122.0

transfer download start

To save the configuration and start the image download

8.1.122.0

transfer download stop

To stop the ongoing image download

8.3.102.0

debug transfer all { enable | disable }

To debug the transfer and download with all sub commands enabled

8.1.122.0

debug transfer tftp { enable | disable }

To debug transfer download of TFTP

8.1.122.0

debug transfer trace { enable | disable }

To debug transfer trace

8.1.122.0

DNS Commands

Command

Description

Added in Release

config network dns default To configure the default DNS servers.

8.2.100.1

show network summary To view a network summary, with the default DNS servers listed, if they are enabled.

8.2.100.1

Migration Commands

The following commands are used for converting an AP from Mobility Express software image to Lightweight CAPWAP AP software image, and vice-versa.

Command

Description

Added in Release

ap-type capwap

To convert ap-type from Mobility Express to CAPWAP

8.1.122.0

ap-type mobilityexpress tftp://tftp_server/file_name

To convert ap-type from CAPWAP to Mobility Express, when running an Mobility Express software image

8.1.122.0

config ap unifiedmode switch_name switch_IP_address

To convert all APs to type CAPWAP simultaneously from the switch

8.1.122.0

NTP Commands

Command

Description

Added in Release

config time ntp server 1 FQDN_of_server To configure the fully qualified domain name of the NTP server having, for example here, NTP index 1.

8.2.100.1

config time ntp server 2 NTP_Server_IP_address To configure the IP address of the NTP server having, for example here, NTP index 2.

8.2.100.1

Next Preferred Master AP and Forced Failover

Command

Description

Added in Release

config ap next-preferred-master cisco_ap_name To set the next preferred master AP.

8.3.102.0

config ap next-preferred-master cisco_ap_name forced-failover To set the next preferred master AP and to manually trigger a failover to that AP.

8.3.102.0

UX Regulatory Domain Commands

Command

Description

Added in Release

config wlan disable 1

To disable WLAN 1

8.1.122.0

config wlan universal-ap-admin enable 1

To enable as universal-ap-admin for wlan 1

8.1.122.0

config wlan enable 1

To enable WLAN 1

8.1.122.0

show ap summary

To show the present country configured ( US, IN, etc ) if not UX.

8.1.122.0

VRRP Commands

The following Virtual Router Redundancy Protocol (VRRP) commands are used during the Mobility Express controller failover and for the master AP.

Command

Description

Added in Release

config ap next-preferred-master

To configure the master AP that has been elected to take over as the new master AP

8.1.122.0

show ap next-preferred-master

To display the status of the master AP

8.1.122.0

clear ap next-preferred-master

To clear the configuration of the master AP

8.1.122.0

WGB Commands

The following show commands can be used to view details of workgroup bridges (WGBs).

Command

Description

Added in Release

show wgb summary

To display the summary of workgroup bridges

8.1.122.0

show wgb detail WGB_MAC

To display the details of a specific workgroup bridge

8.1.122.0

WLAN Security Commands

Command

Description

Added in Release

config wlan security wpa akm cckm {enable | disable} wlan_id

To enable or disable CCKM

8.2.100.1