Installing Nexus Dashboard Fabric Controller Service Using App Store
To install Cisco Nexus Dashboard Fabric Controller Release 12.0.2f in an existing Cisco Nexus Dashboard cluster, perform the following steps:
Before you begin
-
Ensure that you’ve installed the required form factor of Cisco Nexus Dashboard. For instructions, refer to Cisco Nexus Dashboard Deployment Guide.
-
Ensure that you meet the requirements and guidelines described in Prerequisites.
-
The Cisco DC App Center must be reachable from the Nexus Dashboard via the Management Network directly or using a proxy configuration. Nexus Dashboard proxy configuration is described in the Cisco Nexus Dashboard User Guide.
If you are unable to establish the connection to the DC App Center, skip this section and follow the steps described in Installing Nexus Dashboard Fabric Controller Service Manually.
-
Ensure that the services are allocated with IP pool addresses on the Cisco Nexus Dashboard. For more information, refer to Cluster Configuration section in Cisco Nexus Dashboard User Guide.
Procedure
Step 1 |
Launch the Cisco Nexus Dashboard Web UI using appropriate credentials. |
||||
Step 2 |
Click on Admin Console > Services menu in the left navigation pane to open the Services Catalog window. |
||||
Step 3 |
On the App Store tab, identify the Nexus Dashboard Fabric Controller Release 12.0.2f card and click Install. |
||||
Step 4 |
On the License Agreement screen, read the CISCO APP CENTER AGREEMENT and click on Agree and Download. Wait for the application to be downloaded to the Nexus Dashboard and deployed. It may take up to 30 minutes for the application to replicate to all nodes and all services to fully deploy. Nexus Dashboard Fabric Controller application appears in the Services Catalog. The status is shown as Initializing. |
||||
Step 5 |
After the Nexus Dashboard Fabric Controller application is initialized, click Enable on the Nexus Dashboard Fabric Controller application card. The Enable Cisco Nexus Dashboard Fabric Controller window appears. |
||||
Step 6 |
Click on the Deployment Profile field to view the different profiles. Deployment profile contains the resources profile required for Cisco Nexus Dashboard Fabric Controller. For more information, refer to Deployment Profiles. |
||||
Step 7 |
Click Enable. After the services are enabled, the button on the Nexus Dashboard Fabric Controller card shows Open. Wait until all the pods and containers are up and running. |
||||
Step 8 |
Click on Open to launch Cisco Nexus Dashboard Fabric Controller Web UI.
The Nexus Dashboard Fabric Controller Web UI opens in a new browser. The Feature Management window appears.
Three cards namely Fabric Discovery, Fabric Controller, and SAN Controller is displayed. |
||||
Step 9 |
Based on the requirement, select the deployment. From the list of Features, select features that you need to enable on the Nexus Dashboard Fabric Controller deployment.
|
||||
Step 10 |
Click Apply to deploy Nexus Dashboard Fabric Controllerwith the selected features. After the installation is complete, the deployment card and all the features status show as Started. |