Hardware Troubleshooting for Cisco uBR9xx Series Cable Modems

Available Languages

Download Options

  • PDF     (40.9 KB)
    View with Adobe Reader on a variety of devices
Updated:October 4, 2005
Document ID:10154

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document provides troubleshooting information for common hardware failures with Cisco uBR9xx Series cable modems, and provides ways to troubleshoot those failures. The flowchart lists the most common symptoms encountered by the Cisco uBR9xx Series cable modems.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Troubleshooting Flowchart

TS-uBR9001_raster.gif

Related Information

Contributed by

  • fludviks
    rickchen
  • paullee
    ndoshi
  • kkillebr
    ssakpal

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products