E1 R2 シグナリングの設定とトラブルシューティング

ダウンロード オプション

  • PDF     (295.7 KB)
    Adobe Reader を使ってさまざまなデバイスで表示
  • ePub     (98.1 KB)
    iPhone、iPad、Android、ソニーの Reader、または Windows Phone 上で、さまざまなアプリを使って表示
  • Mobi (Kindle)     (131.2 KB)
    Kindle デバイスで、または Kindle アプリを使って複数のデバイスで表示
Updated: 2006 年 2 月 2 日
Document ID:12154

偏向のない言語

この製品のドキュメントセットは、偏向のない言語を使用するように配慮されています。このドキュメントセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブ ランゲージの取り組みの詳細は、こちらをご覧ください。

翻訳について

シスコは世界中のユーザにそれぞれの言語でサポート コンテンツを提供するために、機械と人による翻訳を組み合わせて、本ドキュメントを翻訳しています。ただし、最高度の機械翻訳であっても、専門家による翻訳のような正確性は確保されません。シスコは、これら翻訳の正確性について法的責任を負いません。原典である英語版（リンクからアクセス可能）もあわせて参照することを推奨します。

概要

このドキュメントでは、E1 R2 シグナリングを実装するために必要なコマンド エントリについて段階的に説明します。このドキュメントでは、debug コマンドを使ったトラブルシューティングについても説明します。

注：このドキュメントを使用する前に、「E1 R2 Signaling Theory」を読むことをお勧めします。

前提条件

要件

この設定を実施するには、次の前提条件を満たしている必要があります。

  • R2 シグナリングは E1 にのみ適用されます。

  • Cisco MC3810 ルータでは、R2 シグナリングはサポートされていません。

  • R2 シグナリングを Cisco 2600/3600 シリーズ ルータ上で実行するには、次のハードウェアが必要です。

    VWIC-1MFT-E1、VWIC-2MFT-E1、または VWIC-2MFT-E1-DI と、次の音声密度モジュールの 1 つ。NM-HDV（高密度音声ネットワーク モジュール）または NM-HD-2VE（2 スロット IP 通信音声/ファクス ネットワーク モジュール）。

  • E1 コントローラ（AS5x00、Cisco 2600/3600 ルータ）上で、コマンド ds0-group（または cas-group、Cisco IOS® のバージョンに応じる）を定義します。

  • さまざまな国と地域向けに E1 R2 バリアントをカスタマイズするには、cas-custom コマンドを使用します。

使用するコンポーネント

このドキュメントの情報は、このソフトウェアとハードウェアのバージョンに基づいています。

  • Cisco IOS ソフトウェア リリース 12.0.7T がある Cisco AS5300

注：E1 R2シグナリングは、Cisco IOSソフトウェアリリース12.1.2XHおよび12.1(3)TのCisco 2600/3600シリーズルータに導入されました。

このドキュメントの情報は、特定のラボ環境にあるデバイスに基づいて作成されました。このドキュメントで使用するすべてのデバイスは、初期（デフォルト）設定の状態から起動しています。対象のネットワークが実稼働中である場合には、どのようなコマンドについても、その潜在的な影響について確実に理解しておく必要があります。

表記法

ドキュメント表記の詳細は、「シスコ テクニカル ティップスの表記法」を参照してください。

設定

このセクションでは、E1 R2 の設定に使用できる情報を説明しています。

注：このドキュメントで使用するコマンドの詳細については、Command Lookup Tool(登録ユーザ専用)を参照してください。

AS5300：Cisco IOS：音声フィーチャ カード（VFC）ソフトウェアの互換性

Cisco AS5300 ルータで E1 R2 シグナリングを実装する前に、Cisco IOS ソフトウェアのバージョンが、E1 モジュールの Cisco VCware と互換性があることを確認します。Cisco IOSソフトウェアの互換性を確認するには、『Cisco VCWare Compatibility Matrix for the Cisco AS5300』を参照してください。バージョンに互換性がない場合、音声カードのデジタル信号プロセッサ(DSP)モジュールはロードされず、音声信号処理はされません。

通常、Cisco VCWare のバージョンが Cisco IOS ソフトウェアと非互換の場合、show vfc slot_number interface コマンドを入力して、以下の例に表示されているような出力を確認できます。 

eefje#show vfc 1 interface 
Rx: in ptr 18, outptr 0 
Tx: in ptr 14  outptr  14 
0 in hw queue, 0 queue head , 0 queue tail
Hardware is VFC out-of-band channel 
Interface : state RESET DSP instance (0x61048284)
dsp_number 0, Channel ID 0 
TX outstanding 0, max TX outstanding 0 
Received 18 packets, 1087 bytes, 0 giant packets
0 drops, 0 no buffers, 0 input errors 
121 bytes output, 14 frames output 
0 bounce errors 0 

DSP module 1 is not installed 
DSP module 2 is not installed 
DSP module 3 is not installed 
DSP module 4 is not installed 
DSP module 5 is not installed

最初の例は show vfc slot_number interface コマンドの出力であり、DSP module number is not installed というステートメントは、バージョンがそのモジュール番号と非互換であることを示しています。

出力の 2 番目のセットは、正しい Cisco VCWare バージョンがロードされている DSP モジュールの例です。 

eefje#show vfc 1 interface
Rx: in ptr 24, outptr 0 
TX: in ptr 15  outptr  15 
0 in hw queue, 0 queue head , 0 queue tail 
Hardware is VFC out-of-band channel 
Interface : state RESET DSP instance (0x618C6088)
dsp_number 0, Channel ID 0 
TX outstanding 0, max TX outstanding 0
Received 283288 packets, 15864278 bytes, 0 giant packets 
0 drops, 0 no buffers, 0 input errors 
1416459 bytes output,  141647 frames output 
0 bounce errors 0 

Slot 1, DSPM 1 (C542), DSP 1, Channel 1 
State RESET, DSP instance (0x61914BDC) 
TX outstanding 0, max TX outstanding 8 
Received 0 packets, 0 bytes, 0 giant packets 
0 drops, 0 no buffers, 0 input errors 
0 bytes output,  0 frames output 
0 bounce errors 0 

Slot 1, DSPM 1 (C542), DSP 2, Channel 1
State RESET, DSP instance (0x6191510C) 
TX outstanding 0, max TX outstanding 8 
Received 0 packets, 0 bytes, 0 giant packets 
0 drops, 0 no buffers, 0 input errors
0 bytes output,  0 frames output
0 bounce errors 0

インストールされている Cisco VCWare のバージョンを確認するには、次の例に示すように、show vfc slot_number version vcware コマンドを入力します。 

eefje#show vfc 1 version vcware
Voice Feature Card in Slot 1: 

VCware Version : 4.10 
ROM Monitor Version : 1.2
DSPware Version : 
Technology :  C542

注：Cisco VCWareテクノロジーバージョン（c549またはc542）が、インストールされているVFC DSPテクノロジー(DSPM-542:単密度音声サポートまたは DSPM-549：高密度音声サポート）と一致していることを確認します。

E1 R2 の設定

E1 R2 を設定するには、次の手順を実行します。

  1. コントローラ E1 を、自動構内交換式（PBX）またはスイッチに接続するように設定します。

    E1 のフレーミングとラインコーディングが正しく設定されていることを確認します。

  2. E1 フレーミングの場合は、CRC または non-CRC のいずれかを選択します。

  3. E1 ラインコーディングの場合は、HDB3 または AMI のいずれかを選択します。

  4. E1 クロック ソースの場合は、internal または line のいずれかを選択します。クロック ソースではさまざまな PBX にそれぞれの要件があることに留意してください。

  5. ライン シグナリングの設定を行います。

  6. レジスタ間シグナリングの設定を行います。

  7. cas-custom を使用して、設定をカスタマイズします。

回線シグナリングの設定

ライン シグナリングを定義するには、このコマンド シーケンスを使用します。 

 eefje(config)#controller E1 0
 eefje(config-controller)#ds0-group 1 timeslots 1-15 type ?
...
r2-analog        R2 ITU Q411
r2-digital       R2 ITU Q421
r2-pulse         R2 ITU Supplement 7
...

これは Cisco IOS ソフトウェア リリース 11.3 のコマンド シーケンスです。 

 eefje(config)#controller E1 0
 eefje(config-controller)#cas-group 1 timeslot 1-15 type ?
...

注：Cisco IOSソフトウェアリリース11.3から12.0にアップグレードする場合、新しいコマンドによって古いコマンドが自動的に置き換えられます。

レジスタ間シグナリングの設定

このコマンド シーケンス例は、さまざまなタイプのレジスタ間シグナリングを設定する方法を示しています。 

 eefje(config)#controller E1 0
 eefje(config-controller)#ds0-group 1 timeslots 1-15 type r2-digital ?
dtmf               DTMF tone signaling
r2-compelled       R2 Compelled Register Signaling
r2-non-compelled   R2 Non Compelled Register Signaling
r2-semi-compelled  R2 Semi Compelled Register Signaling

シスコ実装の R2 シグナリングには、デフォルトで有効になっている着信番号識別サービス（DNIS）サポートがあります。自動番号識別（ANI）オプションを有効にしても、DNIS 情報の収集は引き続き実行されます。ANI オプションを指定しても、DNIS 収集は無効になりません。DNIS は、呼び出された番号です。ANI は発信者の番号です。たとえば、A というルータで B というルータを呼び出すように設定する場合、DNIS 番号はルータ B に割り当てられ、ANI 番号はルータ A に割り当てられます。ANI は発信者 ID と似ています。

cas-custom コマンドを使用する E1 R2 カスタマイゼーション

コマンド cas-custom の下のサブコマンドは、国のバリアントを提供するために使用されます。それらは、個別線信号方式（CAS）パラメータをカスタマイズするためにも使用されます。このコマンド シーケンスは、すべての cas-custom command オプションを表示する方法を示しています。 

eefje(config)#controller E1 0
eefje(config-controller)#cas-custom 1
eefje(config-ctrl-cas)#?
CAS custom commands:
  ani-digits           Expected number of ANI digits
  ani-timeout          Timeout for ANI digits
  answer-guard-time    Wait Between Group-B Answer Signal And Line Answer
  answer-signal        Answer signal to be used
  caller-digits        Digits to be collected before requesting CallerID
  category             Category signal
  country              Country Name
  debounce-time        Debounce Timer
  default              Set a command to its defaults
  dnis-complete        Send I-15 after DNIS digits for dial-out
  dnis-digits          Expected number of DNIS digits
  exit                 Exit from cas custom mode
  groupa-callerid-end  Send Group-A Caller ID End
  invert-abcd          invert the ABCD bits before TX and after rx
  ka                   kA Signal
  kd                   KD Signal
  metering             R2 network is sending metering signal
  nc-congestion        Non Compelled Congestion signal
  no                   Negate a command or set its defaults
  proceed-to-send      Suppress proceed-to-send signal for pulsed line signaling
  release-ack          Send Release Acknowledgment to Clear Forward
  release-guard-time   Release Guard Timer
  request-category     DNIS Digits to be collected before requesting category
  seizure-ack-time     Seizure to Acknowledge timer
  unused-abcd          Unused ABCD bit values

cas-custom コマンド パラメータの詳細については、「cas-custom コマンドを使用する E1 R2 カスタマイゼーション」[英語] を参照してください。

ネットワーク図

このドキュメントでは、次のネットワーク設定を使用します。

e1_r2_sig_fig4.gif

設定

このドキュメントの目的に合わせて、E1 インターフェイスには次の 3 つの異なる R2 設定が表示されています。

このドキュメントの論点となっている情報のみが表示されるように、設定は変更されています。

R2 Digital Non-Compelled 用に設定された eefje 
hostname eefje
!
controller E1 0
 clock source line primary
 dso-group 1 timeslots 1-15 type r2-digital r2-non-compelled
 cas-custom 1

!--- For more information on these commands !--- refer to  ds0-group  and  cas-custom.  

!
voice-port 0:1
 cptone BE 

!--- The cptone command is country specific. For more !--- information on this command, refer to  cptone .

!
dial-peer voice 123 pots
 destination-pattern 123
 direct-inward-dial
 port 0:1
 prefix 123
!
dial-peer voice 567 voip
 destination-pattern 567
 session target ipv4:2.0.0.2
!

R2 Digital Semi-Compelled 用に設定された eefje 
hostname eefje
!
controller E1 0
 clock source line primary
 ds0-group 1 timeslots 1-15 type r2-digital r2-semi-compelled
 cas-custom 1

!--- For more information on these commands !--- refer to  ds0-group  and  cas-custom . 

!
voice-port 0:1
 cptone BE

!--- The cptone command is country specific. For more !--- information on this command, refer to  cptone .

dial-peer voice 123 pots
 destination-pattern 123
 direct-inward-dial
 port 0:1
 prefix 123
!
dial-peer voice 567 voip
 destination-pattern 567
 session target ipv4:2.0.0.2
!

R2 Digital Compelled ANI 用に設定された eefje 
hostname eefje
! controller E1 0 clock source line primary ds0-group
1 timeslots 1-15 type r2-digital r2-compelled ani cas-custom 1

!--- For more information on these commands !--- refer to  ds0-group  and  cas-custom . 

voice-port 0:1 cptone BE

!--- The cptone command is country specific. For more !--- information on this command, refer to  cptone .

dial-peer voice 123 pots destination-pattern 123 direct-inward-dial port
0:1 prefix 123
!
dial-peer voice 567 voip destination-pattern 567 session
target ipv4:2.0.0.2
!

確認

現在、この設定に使用できる確認手順はありません。

トラブルシュート

ここでは、設定のトラブルシューティングに使用できる情報を示します。

E1 R2 の障害のトラブルシューティング

この設定に関連するトラブルシューティング情報を次に示します。設定のトラブルシューティングをするには、次の手順を実行します。

  1. コントローラ E1 0 が起動していることを確認します。

    これがダウンしている場合は、フレーミング、ライン コーディング、クロック ソース、アラームを検査したり、ケーブルを交換したり、カードを差し込み直してみたりしてください。リファレンスとして、「 cas-custom コマンドを使用する E1 R2 カスタマイゼーション」[英語] を利用してください。

  2. AS5300 を使用している場合は、DSP が正しくインストールされていることを show vfc slot number interface command コマンドで確認します。

  3. ダイヤルイン方式（DID）を単純な旧式の電話サービス（POTS）ピア上で設定し、受信したディジットを使用して発信ピアを選択します。

  4. 音声ポートで、cptone（cptone は国により異なります）を指定します。

    cptonecountry コマンドは、cas-custom country コマンドと一致するように設定する必要があります。cptone パラメータは、特定の国に合わせたコール プログレス トーンを設定し、さらに重要なこととして、国に応じてエンコーディングを A-law または u-law に設定します。米国のデフォルトのエンコーディングは、u-law です。

  5. 回線とレジスタ シグナリングのプロビジョンを、スイッチの設定に一致させます。

  6. このドキュメントに示されているいくつかの debug をオンにして、出力を確認します。

  7. ルータと PBX またはスイッチの間の通信を検査します。

    • 回線は捕捉されているか。

    • ルータはディジットを受信/送信しているか。

    • コールをクリアする側を特定します。

    可能であれば、Cisco.com で入手できる最新の Cisco IOS ソフトウェア リリースを使用します。

debug コマンドと show コマンド

一部の show コマンドはアウトプット インタープリタ ツールによってサポートされています（登録ユーザ専用）。このツールを使用することによって、show コマンド出力の分析結果を表示できます。

注：debugコマンドを発行する前に、『debugコマンドの重要な情報』を参照してください。

注：Cisco IOSソフトウェアリリース12.0の場合は、次のデバッグを使用します。

  • debug cas：ライン シグナリング用。

  • debug csm voice：レジスタ間シグナリング用。

  • debug vtsp all：PBX とルータとの間で交換されるすべてのメッセージ（ディジット）の出力用。

Cisco IOS ソフトウェア リリース IOS 11.3 の場合、以下のコマンドを使用します。

  • modem-mgmt csm debug-rbs：ライン シグナリング用（まずコンフィギュレーション モードで service internal を指定する必要があります）。

  • debug csm voice：レジスタ間シグナリング用。

  • debug vtsp all：PBX とルータとの間で交換されるすべてのメッセージ（ディジット）の出力用。

AS5400 および AS5350 プラットフォームの場合、以下の debug を使用します。

  • debug sigsm r2：レジスタ間シグナリング用

  • debug vtsp all：PBX とルータとの間で交換されるすべてのメッセージ（ディジット）の出力用。

debug 出力例

このドキュメントでは 3 つの異なる設定を取り上げてきたため、ここでは 3 つの異なる debug を説明しています。

R2 Digital Non-Compelled：567 への着信

このデバッグ出力の理解をさらに深めるには、「E1 R2 シグナル理論」を参照してください。 

eefje#show debug 
CAS:
 Channel Associated Signaling debugging is on
CSM Voice:
Voice Call Switching Module debugging is on
Voice Telephony session debugging is on
Voice Telephony dsp debugging is on
Voice Telephony error debugging is on
eefje#
eefje#
eefje#
Jan 6 10:41:28.677: from NEAT(0): (0/0): Rx SEIZURE (ABCD=0001)
Jan 6 10:41:28.717: VDEV_ALLOCATE: failed to allocate a device
Jan 6 10:41:28.717: VDEV_ALLOCATE: 1/28 is allocated
Jan 6 10:41:28.721: csm_vtsp_init_tdm (voice_vdev=0x620BF874)
Jan 6 10:41:28.721: csm_vtsp_init_tdm: dsprm_tdm_allocate: tdm slot 2, 
dspm 1, dsp 5, dsp_channel 1
Jan 6 10:41:28.721: csm_vtsp_init_tdm: dsprm_tdm_allocate: tdm stream 5, 
channel 3, bank 1, bp_channel 4, BP_stream 255
Jan 6 10:41:28.721: CSM_RX_CAS_EVENT_FROM_NEAT:(cid0018): EVENT_CALL_DIAL_IN 
at slot 2 and port 16
Jan 6 10:41:28.721: CSM_PROC_IDLE: CSM_EVENT_START_DIGIT_COLLECT at slot 2,
 port 16
Jan 6 10:41:28.721: csm_vtsp_start_digit_collect (voice_vdev=0x620BF874)
Jan 6 10:41:28.721:  Enter csm_connect_pri_vdev function
Jan 6 10:41:28.721: csm_connect_pri_vdev:tdm_allocate_BP_ts()call. BP TS allocated
 at BP_stream0, BP_Ch28,vdev_common 0x6 20BF8E4
Jan 6 10:41:28.721: to NEAT:(cid0018) EVENT_CHANNEL_LOCK for slot0 ctlr0 chan0
Jan 6 10:41:28.721: vtsp_do_call_setup_ind
Jan 6 10:41:28.721: vtsp_do_call_setup_ind: Call ID=65681, guid=61FAF610
Jan 6 10:41:28.721: vtsp_do_call_setup_ind: type=0, under_spec=0, name=, id0=0, 
id1=0, id2=0, calling=, called=
Jan 6 10:41:28.721: vtsp_do_call_setup_ind: redirect DN = reason =
 0vtsp_open_voice_and_set_params
Jan 6 10:41:28.721: dsp_close_voice_channel: [0:1:0] packet_len=8 channel_id 
 =8529 packet_id=75
Jan 6 10:41:28.721: dsp_open_voice_channel_20: [0:1:0] packet_Len=16 channel_id 
 =8529 packet_id=74 alaw_ulaw_select=1 associated_signaling_channel=0 time_slot=0
 serial_port=0
Jan 6 10:41:28.721: dsp_encap_config_20: [0:1:0] packet_Len=24 channel_id=8529
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 r_vpxcc=0x0
Jan 6 10:41:28.721: dsp_set_playout: [0:1:0] packet_Len=18 channel_id=8529
 packet_id=76 mode=1 initial=60 min=4 max=200 fax_nom=300
Jan 6 10:41:28.721: dsp_echo_canceller_control: [0:1:0] packet_Len=10 
channel_id=8529 packet_id=66 flags=0x0
Jan 6 10:41:28.721: dsp_set_gains: [0:1:0] packet_Len=12 channel_id=8529 
packet_id=91 in_gain=0 out_gain=0
Jan 6 10:41:28.721: dsp_vad_enable: [0:1:0] packet_Len=10 channel_id=8529 
packet_id=78 thresh=-38
Jan 6 10:41:28.721: dsp_voice_mode: [0:1:0] packet_Len=24 channel_id=8529 
packet_id=73 coding_type=1 voice_field_size=80 V AD_flag=0 echo_length=64 
comfort_noise=1 inband_detect=1 digit_relay=2  
AGC_flag=0vtsp_do_r2_start_digit(): dsp_dtmf_mode()
 dsp_dtmf_mode(VTSP_TONE_R2_MF_FORWARD_MODE)
Jan 6 10:41:28.725: dsp_dtmf_mode: [0:1:0] packet_Len=10 channel_id=8529
 packet_id=65 dtmf_or_mf=1vtsp_do_r2_start_digit():fsm_push(vtsp_r2_state_table)
Jan 6 10:41:28.725: csm_vtsp_call_setup_resp (vdev_info=0x620BF874, 
vtsp_cdb=0x621C5F3C)
Jan 6 10:41:28.725: csm_vtsp_call_setup_resp:vdev_common BP TS allocatedat 
BP_stream0,BP_Ch28
Jan 6 10:41:28.725: csm_vtsp_call_setup_resp:dst_tdm_chnl call. BP TS allocatedat
 stream 5, chan 3,BP_stream 255, BP_ch 4
Jan 6 10:41:28.725: csm_vtsp_call_setup_resp:DST_tdm_chnl call. BP TS allocatedat
 stream 5, chan 3,BP_stream 0, BP_ch 28
Jan 6 10:41:28.725: CSM_PROC_IC1_COLLECT_ADDR_INFO: CSM_EVENT_MODEM_OFFHOOK
 (DNIS=, ANI=) at slot 2, port 16
Jan 6 10:41:28.725: R2 Incoming Voice(2/16): DSX (E1 0:0): STATE: R2_IN_IDLE R2
 Got Event R2_START
Jan 6 10:41:28.821: CSM_RX_CAS_EVENT_FROM_NEAT:(0018):EVENT_START_RX_TONE at slot 2
 and port 16
Jan 6 10:41:28.821: from NEAT(0): (0/0): TX SEIZURE_ACK (ABCD=1101)

!--- Digit 5 is sent: Forward Signal Group I-5.

Jan 6 10:41:29.233: vtsp_process_dsp_message: 
MSG_TX_DTMF_DIGIT_BEGIN: digit=5,
 rtp_timestamp=0x0CA95D43 dc_digit_up
Jan 6 10:41:29.233: csm_vtsp_digit_ready_up (vtsp_cdb=0x621C5F3C) received digit (5)
Jan 6 10:41:29.233: CSM voice (2/16): Rcvd Digit detected(5)
Jan 6 10:41:29.233: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE: R2_IN_COLLECT_DNIS R2
 Got Event 5
Jan 6 10:41:29.365: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=5,
 duration=8321dc_digit
Jan 6 10:41:29.365: csm_vtsp_digit_ready (vtsp_cdb=0x621C5F3C) received digit (5)
Jan 6 10:41:29.365: CSM voice (2/16): Rcvd Digit detected(5)
Jan 6 10:41:29.365: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF

!--- Digit 6 is sent: Forward Signal Group I-6.

Jan 6 10:41:29.593: vtsp_process_dsp_message: 
MSG_TX_DTMF_DIGIT_BEGIN: digit=6,
 rtp_timestamp=0x0CA95D43 dc_digit_up
Jan 6 10:41:29.593: csm_vtsp_digit_ready_up (vtsp_cdb=0x621C5F3C) received digit (6)
Jan 6 10:41:29.593: CSM voice (2/16): Rcvd Digit detected(6)
Jan 6 10:41:29.593: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE: R2_IN_COLLECT_DNIS R2
 Got Event 6
Jan 6 10:41:29.725: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=6,
 duration=8321dc_digit
Jan 6 10:41:29.725: csm_vtsp_digit_ready (vtsp_cdb=0x621C5F3C) received digit (6)
Jan 6 10:41:29.725: CSM voice (2/16): Rcvd Digit detected(6)
Jan 6 10:41:29.725: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE: R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF

!--- Digit 7 is sent: Forward Signal Group I-7.

Jan 6 10:41:29.953: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN: 
digit=7, rtp_timestamp=0x0CA95D43 dc_digit_up
Jan 6 10:41:29.953: csm_vtsp_digit_ready_up (vtsp_cdb=0x621C5F3C)
received digit (7)
Jan 6 10:41:29.953: CSM voice (2/16): Rcvd Digit detected(7)
Jan 6 10:41:29.953: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event 7
Jan 6 10:41:30.085: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: 
digit=7, duration=8321dc_digit
Jan 6 10:41:30.085: csm_vtsp_digit_ready (vtsp_cdb=0x621C5F3C)received digit (7)
Jan 6 10:41:30.085: CSM voice (2/16): Rcvd Digit detected(7)
Jan 6 10:41:30.085: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE: R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF

!--- Timeout: 3 seconds (default timer - AS5300 assumes DNIS is finished).

Jan 6 10:41:32.953: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE: R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_TIMER

!--- Send digit 6: Backward Signal Group B-6 (subscriber's line free-charge).

Jan 6 10:41:32.953: vtsp_r2_generate_digits: vdev_common=0x620BF8E4, 
string=567dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 6#

Jan 6 10:41:32.953: dsp_dtmf_dialing: [0:1:0] packet_Len=36 channel_id=8529 
packet_id=90 string=6# digits=2, time_on=150, time_off=30
Jan 6 10:41:32.953:&   digit=e, components=2, freq_of_first=900, 
freq_of_second=780, amp_of_first=8192, amp_of_second=8192
Jan 6 10:41:32.953:    digit=o, components=2, freq_of_first=0,  
freq_of_second=0, amp_of_first=1, amp_of_second=1
Jan 6 10:41:33.313: vtsp_process_dsp_message: 
MSG_TX_DIALING_DONE dc_dialing_done()
Jan 6 10:41:33.313: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE:R2_IN_ANSWER_PULSE R2
 Got Event R2_DIGITS_GENR2_ALERTING
Jan 6 10:41:34.313: R2 Incoming Voice(2/16): DSX (E1 0:0): 
STATE: R2_IN_ANSWER_PULSE R2
 Got Event R2_TONE_TIMER
Jan 6 10:41:34.313:  R2_IN_IDLE:2 r2_in_connect called
Jan 6 10:41:34.313: CSM_PROC_IC1_COLLECT_ADDR_INFO: 
 CSM_EVENT_ADDR_INFO_COLLECTED (DNIS=567, ANI=) at slot 2, port 16
Jan 6 10:41:34.313: vtsp_tsp_call_accept_check (sdb=0x61B8F0E0, calling_number=
 called_number=567): peer_tag=0
Jan 6 10:41:34.313: VDEV_ALLOCATE: failed to allocate a device
Jan 6 10:41:34.313: VDEV_ALLOCATE_ALMOST_READY: failed to allocate a non-idle modem
Jan 6 10:41:34.313: VDEV_ALLOCATE: failed to allocate a device
Jan 6 10:41:34.313: VDEV_ALLOCATE_ALMOST_READY: failed to allocate a non-idle modem
Jan 6 10:41:34.313: VDEV_ALLOCATE: failed to allocate a device
Jan 6 10:41:34.313: VDEV_ALLOCATE_ALMOST_READY: failed to allocate a non-idle modem
Jan 6 10:41:34.313: CSM_PROC_IC3_WAIT_FOR_RES_RESP: CSM_EVENT_RESOURCE_OK at slot 2,
 port 16
Jan 6 10:41:34.313: vtsp_ic_switch : (voice_vdev= 0x620BF874)
Jan 6 10:41:34.313: vtsp_tsp_call_switch_ind (cdb=0x621C5F3C, tsp_info=0x620BF874,
 calling_number= called_number=567 redir ect_number=): 
peer_tag=123dc_switch: fsm_pop()
Jan 6 10:41:34.313: vtsp_do_call_setup_ind
Jan 6 10:41:34.313: vtsp_do_call_setup_ind: Call ID=65683, guid=61FAF610
Jan 6 10:41:34.313: vtsp_do_call_setup_ind: type=0, under_spec=0,
 name=ab^Lx, id0=1, id1=0, id2=0, calling=123, called=567
Jan 6 10:41:34.317: dsp_cp_tone_off: [] packet_Len=8 channel_id=8529 packet_id=71
Jan 6 10:41:34.317: dsp_idle_mode: [] packet_Len=8 channel_id=8529 packet_id=68
Jan 6 10:41:34.317: dsp_close_voice_channel: [] packet_Len=8 channel_id=8529 
packet_id=75
Jan 6 10:41:34.317: vtsp_timer_stop: 67475758
Jan 6 10:41:34.317: csm_vtsp_call_setup_resp (vdev_info=0x620BF874,
 vtsp_cdb=0x621C5F3C)
Jan 6 10:41:34.317: csm_vtsp_call_setup_resp:vdev_common 
BP TS allocatedat BP_stream0,
 BP_Ch28
Jan 6 10:41:34.317: csm_vtsp_call_setup_resp:DST_tdm_chnl call. BP TS allocatedat
 stream 5, chan 3,BP_stream 0, BP_ch 28
Jan 6 10:41:34.317: csm_vtsp_call_setup_resp:DST_tdm_chnl call. BP TS allocatedat
 stream 5, chan 3,BP_stream 0, BP_ch 28vt sp_open_voice_and_set_params
Jan 6 10:41:34.317: dsp_close_voice_channel: [0:1 (54)] packet_Len=8 channel_id=8529
 packet_id=75
Jan 6 10:41:34.317: dsp_open_voice_channel_20: [0:1 (54)] packet_Len=16 
channel_id=8529
 packet_id=74 alaw_ulaw_select=1 associated_signaling_channel=0 time_slot=0 
serial_port=0
Jan 6 10:41:34.317: dsp_encap_config_20: [0:1 (54)] packet_Len=24 channel_id=8529
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 r_vpxcc=0x0
Jan 6 10:41:34.317: dsp_set_playout: [0:1 (54)] packet_Len=18 channel_id=8529
 packet_id=76 mode=1 initial=60 min=4 max=200 fax_nom=300
Jan 6 10:41:34.317: dsp_echo_canceller_control: [0:1 (54)] packet_Len=10 
channel_id=8529
 packet_id=66 flags=0x0
Jan 6 10:41:34.317: dsp_set_gains: [0:1 (54)] packet_Len=12 
channel_id=8529 packet_id=91
 in_gain=0 out_gain=0
Jan 6 10:41:34.317: dsp_vad_enable: [0:1 (54)] packet_Len=10 
channel_id=8529 packet_id=78
 thresh=-38act_proceeding
Jan 6 10:41:34.321: csm_vtsp_call_proceeding:DST_tdm_chnl call. 
BP TS allocatedstream 5,
 chan 3,BP_stream 0, BP_ch 28act_alert
Jan 6 10:41:34.345: vtsp_ring_noan_timer_start: 67475761
Jan 6 10:41:34.345: csm_vtsp_call_alert (vtsp_cdb=0x621C5F3C)act_bridge act_caps_ind
Jan 6 10:41:34.589: act_caps_ind:Encap 1, Vad 2, Codec 0x4, CodecBytes 20,
    FaxRate 2, FaxBytes 20 SignalType 0
    DtmfRelay 1, Modem 1act_caps_ack
Jan 6 10:41:34.589: dsp_idle_mode: [0:1 (54)] packet_Len=8 
channel_id=8529 packet_id=68
Jan 6 10:41:34.589: act_caps_ack: codec = 15, ret = 1
Jan 6 10:41:34.589: dsp_cp_tone_off: [0:1 (54)] packet_Len=8 channel_id=8529 
  packet_id=71 
Jan 6 10:41:34.589: dsp_idle_mode: [0:1 (54)] packet_Len=8 
channel_id=8529 packet_id=68 
Jan 6 10:41:34.589: dsp_encap_config_20: [0:1 (54)] packet_Len=24 channel_id=8529 
  packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 r_vpxcc=0x0 
Jan 6 10:41:34.589: dsp_voice_mode: [0:1 (54)] packet_Len=24 channel_id=8529 
 packet_id=73 coding_type=20 voice_field_size=20 VAD_flag=1 echo_length=64
 comfort_noise=1 inband_detect=1 digit_relay=2 AGC_flag=0act_alert_connect 
Jan 6 10:41:36.857: vtsp_ring_noan_timer_stop: 67476012 
Jan 6 10:41:36.857: dsp_cp_tone_off: [0:1 (54)] packet_Len=8 channel_id=8529 
  packet_id=71 
Jan 6 10:41:36.857: csm_vtsp_call_connect (vtsp_cdb=0x621C5F3C, 
voice_vdev=0x620BF874) 
Jan 6 10:41:36.857: CSM_IC5_WAIT_FOR_SWITCH_OVER: CSM_EVENT_MODEM_OFFHOOK 
  at slot 2, port 16 
Jan 6 10:41:36.917: CSM_RX_CAS_EVENT_FROM_NEAT:(0018):  EVENT_CHANNEL_CONNECTED 
  at slot 2 and port 16 
Jan 6 10:41:36.917: CSM_PROC_IC6_WAIT_FOR_CONNECT: CSM_EVENT_DSX0_CONNECTED 
  at slot 2, port 16 
Jan 6 10:41:36.921: from NEAT(0): (0/0): TX ANSWERED(ABCD=0101)
eefje#

R2 Digital Semi-Compelled：567 への着信

このデバッグ出力の理解をさらに深めるには、「E1 R2 シグナル理論」を参照してください。 

eefje#show debug 
CAS:
 Channel Associated Signaling debugging is on
CSM Voice:
Voice Call Switching Module debugging is on 
Voice Telephony session debugging is on
Voice Telephony dsp debugging is on
Voice Telephony error debugging is on
eefje#
eefje#
eefje#
Jan  6 09:53:42.389: from NEAT(0): (0/2): Rx SEIZURE(ABCD=0001)
Jan 6 09:53:42.433: VDEV_ALLOCATE: failed to allocate a device
Jan 6 09:53:42.433: VDEV_ALLOCATE: 1/27 is allocated
Jan 6 09:53:42.433: csm_vtsp_init_tdm (voice_vdev=0x620BF320)
Jan 6 09:53:42.433: csm_vtsp_init_tdm: dsprm_tdm_allocate: tdm slot 2, dspm 1,
 dsp 4, dsp_channel 4
Jan 6 09:53:42.433: csm_vtsp_init_tdm: dsprm_tdm_allocate: tdm stream 7, channel 0,
 bank 4, BP_channel 3, BP_stream 255
Jan 6 09:53:42.433: CSM_RX_CAS_EVENT_FROM_NEAT:(cid0017): EVENT_CALL_DIAL_IN
 at slot 2 and port 15
Jan 6 09:53:42.433: CSM_PROC_IDLE: CSM_EVENT_START_DIGIT_COLLECT
 at slot 2, port 15
Jan 6 09:53:42.433: csm_vtsp_start_digit_collect (voice_vdev=0x620BF320)
Jan 6 09:53:42.433:  Enter csm_connect_pri_vdev function
Jan 6 09:53:42.433: csm_connect_pri_vdev:tdm_allocate_BP_Ts()call. BP TS allocated
 at BP_stream0, BP_Ch27,vdev_common 0x6 20BF390
Jan 6 09:53:42.433: to NEAT:(cid0017) EVENT_CHANNEL_LOCK for slot0 ctlr0 chan2
Jan 6 09:53:42.433: vtsp_do_call_setup_ind
Jan 6 09:53:42.433: vtsp_do_call_setup_ind: Call ID=65675, guid=61FAF610
Jan 6 09:53:42.433: vtsp_do_call_setup_ind: type=0, under_spec=0, name=, id0=0,
 id1=0, id2=0, calling=, called=
Jan 6 09:53:42.433: vtsp_do_call_setup_ind: redirect DN = reason =
 0vtsp_open_voice_and_set_params
Jan 6 09:53:42.433: dsp_close_voice_channel: [0:1:2] packet_Len=8 channel_id=8516
 packet_id=75
Jan 6 09:53:42.433: dsp_open_voice_channel_20: [0:1:2] packet_Len=16 
channel_id=8516
 packet_id=74 alaw_ulaw_select=1 associated_signaling_channel=0 
time_slot=1 serial_port=1
Jan 6 09:53:42.433: dsp_encap_config_20: [0:1:2] packet_Len=24 channel_id=8516
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 r_vpxcc=0x0
Jan 6 09:53:42.433: dsp_set_playout: [0:1:2] packet_Len=18 channel_id=8516 
 packet_id=76 mode=1 initial=60 min=4 max=200 fax_nom=300
Jan 6 09:53:42.433: dsp_echo_canceller_control: [0:1:2] 
packet_Len=10 channel_id=8516
 packet_id=66 flags=0x0
Jan 6 09:53:42.437: dsp_set_gains:[0:1:2] packet_Len=12 
channel_id=8516 packet_id=91
 in_gain=0 out_gain=0
Jan 6 09:53:42.437: dsp_vad_enable: [0:1:2] packet_Len=10 channel_id=8516
 packet_id=78 thresh=-38
Jan 6 09:53:42.437: dsp_voice_mode: [0:1:2] packet_Len=24 channel_id=8516
 packet_id=73 coding_type=1 voice_field_size=80 VAD_flag=0 echo_length=64
 comfort_noise=1 inband_detect=1 digit_relay=2 AGC_flag=0vtsp_do_r2_start_digit():
 dsp_dtmf_mode() dsp_dtmf_mode(VTSP_TONE_R2_MF_FORWARD_MODE)
Jan 6 09:53:42.437: dsp_dtmf_mode: [0:1:2] packet_Len=10 channel_id=8516
 packet_id=65 dtmf_or_mf=1vtsp_do_r2_start_digit(): fsm_push(vtsp_r2_state_table)
Jan 6 09:53:42.437: csm_vtsp_call_setup_resp (vdev_info=0x620BF320, 
vtsp_cdb=0x621C5F3C)
Jan 6 09:53:42.437: csm_vtsp_call_setup_resp:vdev_common BP 
TS allocatedat BP_stream0,
 BP_Ch27
Jan 6 09:53:42.437: csm_vtsp_call_setup_resp:DST_tdm_chnl call. BP TS allocatedat
 stream 7, chan 0,BP_stream 255, BP_ch 3
Jan 6 09:53:42.437: csm_vtsp_call_setup_resp:DST_tdm_chnl call. BP TS allocatedat
 stream 7, chan 0,BP_stream 0, BP_ch 27
Jan 6 09:53:42.437: CSM_PROC_IC1_COLLECT_ADDR_INFO: CSM_EVENT_MODEM_OFFHOOK
 (DNIS=, ANI=) at slot 2, port 15
Jan 6 09:53:42.437: R2 Incoming Voice(2/15): DSX (E1 0:2): STATE:R2_IN_IDLE R2
 Got Event R2_START
Jan 6 09:53:42.533: CSM_RX_CAS_EVENT_FROM_NEAT:(0017):EVENT_START_RX_TONE
 at slot 2 and port 15
Jan 6 09:53:42.533: from NEAT(0): (0/2): TX SEIZURE_ACK (ABCD=1101)

!--- Digit 5 is sent: Forward Signal Group I-5.

Jan 6 09:53:42.641: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN:
 digit=5, rtp_timestamp=0x9330B42B dc_digit_up
Jan 6 09:53:42.641: csm_vtsp_digit_ready_up (vtsp_cdb=0x621C5F3C) received digit (5)
Jan 6 09:53:42.641: CSM voice (2/15): Rcvd Digit detected(5)
Jan 6 09:53:42.641: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event 5

!--- Digit 1 sent (pulse): Backward Signal Group A-1 (Send next digit) !--- "#" this indicates that it is a pulse). 

Jan 6 09:53:42.641: vtsp_r2_generate_digits: vdev_common=0x620BF390, 
string=5dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 1#

Jan 6 09:53:42.641: dsp_dtmf_dialing: [0:1:2] packet_Len=36 channel_id=8516
 packet_id=90 string=1# digits=2, time_on=150, time_off=30
Jan 6 09:53:42.641:    digit=`, components=2, freq_of_first=1020, 
freq_of_second=1140,
 amp_of_first=8192, amp_of_second=8192
Jan 6 09:53:42.641:    digit=o, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1
Jan 6 09:53:42.741: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=5,
 duration=8291dc_digit
Jan 6 09:53:42.741: csm_vtsp_digit_ready (vtsp_cdb=0x621C5F3C) received digit (5)
Jan 6 09:53:42.741: CSM voice (2/15): Rcvd Digit detected(5)
Jan 6 09:53:42.741: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF

!--- Digit 6 is sent: Forward Signal Group I.

Jan 6 09:53:42.881: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN:
digit=6, rtp_timestamp=0x9330B42B dc_digit_up
Jan 6 09:53:42.881: csm_vtsp_digit_ready_up (vtsp_cdb=0x621C5F3C)received digit (6)
Jan 6 09:53:42.881: CSM voice (2/15): Rcvd Digit detected(6)
Jan 6 09:53:42.881: R2 Incoming Voice(2/15): DSX (E1 0:2):
 STATE:R2_IN_COLLECT_DNIS R2
 Got Event 6

!--- Digit 1 sent (pulse): Backward Signal Group A-1. (Send next digit.)

Jan 6 09:53:42.881: vtsp_r2_generate_digits: vdev_common=0x620BF390, 
string=56dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 1#

Jan 6 09:53:42.881: dsp_dtmf_dialing: [0:1:2] packet_Len=36 channel_id=8516
 packet_id=90 string=1# digits=2, time_on=150, time_off=30
Jan 6 09:53:42.881:    digit=`, components=2, freq_of_first=1020, 
freq_of_second=1140,
 amp_of_first=8192, amp_of_second=8192
Jan 6 09:53:42.881:    digit=o, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1
Jan 6 09:53:42.981: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=6,
 duration=8291dc_digit
Jan 6 09:53:42.981: csm_vtsp_digit_ready (vtsp_cdb=0x621C5F3C) received digit (6)
Jan 6 09:53:42.981: CSM voice (2/15): Rcvd Digit detected(6)
Jan 6 09:53:42.981: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF

!--- Digit 7 is sent: Forward Signal Group I-7.

Jan 6 09:53:43.121: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN:
 digit=7, rtp_timestamp=0x9330B42B dc_digit_up
Jan 6 09:53:43.121: csm_vtsp_digit_ready_up (vtsp_cdb=0x621C5F3C)received digit (7)
Jan 6 09:53:43.121: CSM voice (2/15): Rcvd Digit detected(7)
Jan 6 09:53:43.121: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event 7

!--- Send digit 1 (pulse): Backward Signal Group A-1.

Jan 6 09:53:43.121: vtsp_r2_generate_digits: vdev_common=0x620BF390, 
string=567dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 1#

Jan 6 09:53:43.121: dsp_dtmf_dialing: [0:1:2] packet_Len=36 channel_id=8516
 packet_id=90 string=1# digits=2, time_on=150, time_off=30
Jan 6 09:53:43.121:    digit=`, components=2, freq_of_first=1020, 
freq_of_second=1140,
 amp_of_first=8192, amp_of_second=8192
Jan 6 09:53:43.121:    digit=o, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1
Jan 6 09:53:43.221: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=7,
 duration=8291dc_digit
Jan 6 09:53:43.221: csm_vtsp_digit_ready (vtsp_cdb=0x621C5F3C) received digit (7)
Jan 6 09:53:43.221: CSM voice (2/15): Rcvd Digit detected(7)
Jan 6 09:53:43.221: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF
Jan 6 09:53:43.489: vtsp_process_dsp_message: MSG_TX_DIALING_DONEdc_dialing_done()

!--- Timeout is 3 seconds.

Jan 6 09:53:46.121: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_TIMER

!--- Digit 3 sent(pulse): Backward Signal Group A-3. !--- (Address-complete, changeover to reception of Group-B signals).

Jan 6 09:53:46.121: vtsp_r2_generate_digits: vdev_common=0x620BF390,
 string=567dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 3#
Jan 6 09:53:46.121: dsp_dtmf_dialing: [0:1:2] packet_Len=36 channel_id=8516
 packet_id=90 string=3# digits=2, time_on=150, time_off=30
Jan 6 09:53:46.121:    digit=b, components=2, freq_of_first=1020, 
freq_of_second=900,
 amp_of_first=8192, amp_of_second=8192
Jan 6 09:53:46.121:    digit=o, components=2, freq_of_first=0,
freq_of_second=0, amp_of_first=1, amp_of_second=1

!--- Digit 1 is sent: Forward Signal Group II-1 !--- (subscriber without priority).

Jan 6 09:53:46.361: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN:
digit=1, rtp_timestamp=0x9330B42B dc_digit_up
Jan 6 09:53:46.361: csm_vtsp_digit_ready_up (vtsp_cdb=0x621C5F3C)
received digit (1)
Jan 6 09:53:46.361: CSM voice (2/15): Rcvd Digit detected(1)
Jan 6 09:53:46.361: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_CATEGORY R2
 Got Event 1
Jan 6 09:53:46.361:  r2_comp_category:R2_ALERTING

!--- Digit 6 sent (pulse): Backward Signal Group B-6 !--- (the subscriber line free of charge).

Jan 6 09:53:46.361: vtsp_r2_generate_digits: vdev_common=0x620BF390, 
string=567dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 6#

Jan  6 09:53:46.361: dsp_dtmf_dialing: [0:1:2] packet_Len=36 channel_id=8516
 packet_id=90 string=6# digits=2, time_on=150, time_off=30
Jan 6 09:53:46.361:    digit=e, components=2, freq_of_first=900, 
freq_of_second=780,
 amp_of_first=8192, amp_of_second=8192
Jan 6 09:53:46.361:    digit=o, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1
Jan 6 09:53:46.461: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF:digit=1,
 duration=8291dc_digit
Jan 6 09:53:46.461: csm_vtsp_digit_ready (vtsp_cdb=0x621C5F3C)received digit (1)
Jan 6 09:53:46.461: CSM voice (2/15): Rcvd Digit detected(1)
Jan 6 09:53:46.461: R2 Incoming Voice(2/15): DSX (E1 0:2): STATE:R2_IN_COMPLETE R2
 Got Event R2_TONE_OFF
Jan 6 09:53:46.729: vtsp_process_dsp_message: MSG_TX_DIALING_DONEdc_dialing_done()
Jan 6 09:53:47.461: R2 Incoming Voice(2/15): DSX (E1 0:2): 
STATE:R2_IN_WAIT_GUARD R2
 Got Event R2_TONE_TIMER
Jan 6 09:53:47.461:  R2_IN_IDLE:2 r2_in_connect called
Jan 6 09:53:47.461: CSM_PROC_IC1_COLLECT_ADDR_INFO: CSM_EVENT_ADDR_INFO_COLLECTED
(DNIS=567, ANI=) at slot 2, port 15
Jan 6 09:53:47.461: vtsp_tsp_call_accept_check (sdb=0x61B8F0E0,calling_number=
 called_number=567): peer_tag=0
Jan 6 09:53:47.461: VDEV_ALLOCATE: failed to allocate a device
Jan 6 09:53:47.461: VDEV_ALLOCATE_ALMOST_READY: failed to allocate a non-idle modem
Jan 6 09:53:47.461: VDEV_ALLOCATE: failed to allocate a device
Jan 6 09:53:47.461: VDEV_ALLOCATE_ALMOST_READY: failed to allocate a non-idle modem
Jan 6 09:53:47.461: VDEV_ALLOCATE: failed to allocate a device
Jan 6 09:53:47.461: VDEV_ALLOCATE_ALMOST_READY: failed to allocate a non-idle modem
Jan 6 09:53:47.461: CSM_PROC_IC3_WAIT_FOR_RES_RESP: CSM_EVENT_RESOURCE_OK at slot 2,
 port 15
Jan 6 09:53:47.461: vtsp_IC_switch : (voice_vdev= 0x620BF320)
Jan 6 09:53:47.461: vtsp_tsp_call_switch_ind (cdb=0x621C5F3C,tsp_info=0x620BF320,
 calling_number= called_number=567 redirect_number=): 
peer_tag=123dc_switch: fsm_pop()
Jan 6 09:53:47.461: vtsp_do_call_setup_ind
Jan 6 09:53:47.461: vtsp_do_call_setup_ind: Call ID=65677, guid=61FAF610
Jan 6 09:53:47.461: vtsp_do_call_setup_ind: type=0, under_spec=0, name=AB^Lo, id0=3,
 id1=0, id2=0, calling=123, called=567
Jan 6 09:53:47.465: dsp_cp_tone_off: [] packet_Len=8 channel_id=8516 packet_id=71
Jan 6 09:53:47.465: dsp_idle_mode: [] packet_Len=8 channel_id=8516 packet_id=68
Jan 6 09:53:47.465: dsp_close_voice_channel: [] packet_Len=8 channel_id=8516 
packet_id=75
Jan 6 09:53:47.465: vtsp_timer_stop: 67189073
Jan 6 09:53:47.465: csm_vtsp_call_setup_resp (vdev_info=0x620BF320,
 vtsp_cdb=0x621C5F3C)
Jan 6 09:53:47.465: csm_vtsp_call_setup_resp:vdev_common 
BP TS allocatedat BP_stream0,
 BP_Ch27
Jan 6 09:53:47.465: csm_vtsp_call_setup_resp:DST_tdm_chnl call. BP TS allocatedat
 stream 7, chan 0,BP_stream 0, BP_ch 27
Jan 6 09:53:47.465: csm_vtsp_call_setup_resp:DST_tdm_chnl call. BP TS allocatedat
 stream 7, chan 0,BP_stream 0, BP_ch 27vtsp_open_voice_and_set_params
Jan 6 09:53:47.465: dsp_close_voice_channel: [0:1 (52)] packet_Len=8 channel_id=8516
 packet_id=75
Jan 6 09:53:47.465: dsp_open_voice_channel_20: [0:1 (52)] 
packet_Len=16 channel_id=8516
 packet_id=74 alaw_ulaw_select=1 associated_signaling_channel=0 
time_slot=1 serial_port=1
Jan 6 09:53:47.465: dsp_encap_config_20: [0:1 (52)] packet_Len=24 
channel_id=8516
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 r_vpxcc=0x0
Jan 6 09:53:47.465: dsp_set_playout: [0:1 (52)] packet_Len=18 channel_id=8516
 packet_id=76 mode=1 initial=60 min=4 max=200  fax_nom=300
Jan& 6 09:53:47.465: dsp_echo_canceller_control: [0:1 (52)] packet_Len=10 
channel_id=8516
 packet_id=66 flags=0x0
Jan 6 09:53:47.465: dsp_set_gains: [0:1 (52)] packet_Len=12 channel_id=8516
 packet_id=91 in_gain=0 out_gain=0
Jan 6 09:53:47.465: dsp_vad_enable: [0:1 (52)] packet_Len=10 channel_id=8516
 packet_id=78 thresh=-38act_proceeding
Jan 6 09:53:47.469: csm_vtsp_call_proceeding:DST_tdm_chnl call. BP TS 
allocatedstream 7,
 chan 0,BP_stream 0, BP_ch 27act_alert
Jan 6 09:53:47.493: vtsp_ring_noan_timer_start: 67189076
Jan 6 09:53:47.493: csm_vtsp_call_alert (vtsp_cdb=0x621C5F3C)
act_bridge act_caps_ind
Jan 6 09:53:47.737: act_caps_ind:Encap 1, Vad 2, Codec 0x4, CodecBytes 20,
 FaxRate 2, FaxBytes 20 SignalType 0
 DtmfRelay 1, Modem 1act_caps_ack
Jan 6 09:53:47.737: dsp_idle_mode: [0:1 (52)] packet_Len=8 channel_id=8516 
packet_id=68
Jan 6 09:53:47.737: act_caps_ack: codec = 15, ret = 1
Jan 6 09:53:47.737: dsp_cp_tone_off: [0:1 (52)] packet_Len=8 channel_id=8516 
 packet_id=71 
Jan 6 09:53:47.737: dsp_idle_mode: [0:1 (52)] packet_Len=8 channel_id=8516 
 packet_id=68 
Jan 6 09:53:47.737: dsp_encap_config_20: [0:1 (52)] packet_Len=24 channel_id=8516 
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 r_vpxcc=0x0 
Jan 6 09:53:47.737: dsp_voice_mode: [0:1 (52)] packet_Len=24 channel_id=8516 
 packet_id=73 coding_type=20 voice_field_size= 20 VAD_flag=1 echo_length=64
 comfort_noise=1 inband_detect=1 digit_relay=2 AGC_flag=0act_alert_connect 
Jan 6 09:53:49.461: vtsp_ring_noan_timer_stop: 67189273 
Jan 6 09:53:49.461: dsp_cp_tone_off: [0:1 (52)] packet_Len=8 channel_id=8516 
  packet_id=71 
Jan 6 09:53:49.461: csm_vtsp_call_connect (vtsp_cdb=0x621C5F3C, 
voice_vdev=0x620BF320) 
Jan 6 09:53:49.461: CSM_IC5_WAIT_FOR_SWITCH_OVER: CSM_EVENT_MODEM_OFFHOOK 
  at slot 2, port 15 
Jan 6 09:53:49.617: CSM_RX_CAS_EVENT_FROM_NEAT:(0017):  EVENT_CHANNEL_CONNECTED 
  at slot 2 and port 15
Jan 6 09:53:49.617: CSM_PROC_IC6_WAIT_FOR_CONNECT: CSM_EVENT_DSX0_CONNECTED 
  at slot 2, port 15 
Jan 6 09:53:49.621: from NEAT(0): (0/2): TX ANSWERED(ABCD=0101)
eefje#
eefje#

R2 Digital Compelled ANI：567 への着信

このデバッグ出力の理解をさらに深めるには、「E1 R2 シグナル理論」を参照してください。 

eefje#debug csm voice 
Voice Call Switching Module debugging is on 
eefje#debug cas
Channel Associated Signaling debugging is on 
Jan 7 10:00:02.907: from NEAT(0): debug-cas is on 
Jan 7 10:00:02.907: from NEAT(0): special debug-cas is offg vtsp all 
Voice telephony call control all debugging is on
eefje# 
eefje#
Jan 7 10:00:23.883: from NEAT(0): (0/8): Rx SEIZURE (ABCD=0001) 
Jan 7 10:00:23.927: VDEV_ALLOCATE: failed to allocate a device 
Jan 7 10:00:23.927: VDEV_ALLOCATE: 1/2 is allocated 
Jan 7 10:00:23.927: csm_vtsp_init_tdm (voice_vdev=0x61F19688) 
Jan 7 10:00:23.927: csm_vtsp_init_tdm: dsprm_tdm_allocate: tdm slot 1, 
dspm 3, dsp 4,
 dsp_channel 1 
Jan 7 10:00:23.927: csm_vtsp_init_tdm: dsprm_tdm_allocate: tdm stream 5, 
channel 13,
 bank 0, BP_channel 15, BP_stream 255 
Jan 7 10:00:23.927: CSM_RX_CAS_EVENT_FROM_NEAT:(cid0007): 
EVENT_CALL_DIAL_IN at slot 1
 and port 60 
Jan 7 10:00:23.927: CSM_PROC_IDLE: CSM_EVENT_START_DIGIT_COLLECT at slot 1, port 60 
Jan 7 10:00:23.927: csm_vtsp_start_digit_collect (voice_vdev=0x61F19688) 
Jan 7 10:00:23.927:  Enter csm_connect_pri_vdev function 
Jan 7 10:00:23.927: csm_connect_pri_vdev:tdm_allocate_BP_Ts() call. BP 
TS allocated at BP_stream0, BP_Ch8,vdev_common 0x6205E5F8 
Jan 7 10:00:23.927: to NEAT:(cid0007) EVENT_CHANNEL_LOCK for slot0 ctlr0 chan8 
Jan 7 10:00:23.927: vtsp_do_call_setup_ind 
Jan 7 10:00:23.927: vtsp_do_call_setup_ind: Call ID=65579, guid=62031A88 
Jan 7 10:00:23.927: vtsp_do_call_setup_ind: type=0, under_spec=0, 
name=, id0=0, id1=0,id2=0, calling=, called= 
Jan 7 10:00:23.927: vtsp_do_call_setup_ind: redirect DN =  reason = 
 0vtsp_do_r2_start_digit(): fsm_push(vtsp_r2_state_table)

Jan 7 10:00:23.927: csm_vtsp_call_setup_resp (vdev_info=0x61F19688, 
vtsp_cdb=0x61B5BFF8)
Jan 7 10:00:23.927: csm_vtsp_call_setup_resp:vdev_common 
BP TS allocatedat BP_stream0,
 BP_Ch8 
Jan 7 10:00:23.927: csm_vtsp_call_setup_resp:DST_tdm_chnl call. 
BP TS allocatedat stream
 5, chan 13,BP_stream 255, BP_ch 15 
Jan 7 10:00:23.927: csm_vtsp_call_setup_resp:DST_tdm_chnl call. 
BP TS allocatedat stream
 5, chan 13,BP_stream 0, BP_ch 8 
Jan 7 10:00:23.927: CSM_PROC_IC1_COLLECT_ADDR_INFO: CSM_EVENT_MODEM_OFFHOOK 
(DNIS=, ANI=) at slot 1, port 60 

Jan 7 10:00:23.931: R2 Incoming Voice(1/60): DSX (E1 0:8): STATE: R2_IN_IDLE 
R2 Got Event R2_START 
Jan 7 10:00:24.027: CSM_RX_CAS_EVENT_FROM_NEAT:(0007):  EVENT_START_RX_TONE 
at slot 1 and port 60 
Jan 7 10:00:24.027: from NEAT(0): (0/8): TX SEIZURE_ACK 
(ABCD=1101)dc_init_dsp
 vtsp_open_voice_and_set_params 
Jan 7 10:00:24.151: dsp_close_voice_channel: [0:1:8] packet_Len=8 channel_id=4929 
 packet_id=75 
Jan 7 10:00:24.151: dsp_open_voice_channel_20: [0:1:8] packet_Len=16 
channel_id=4929 
 packet_id=74 alaw_ulaw_select=1 associated_signaling_channel=0 
time_slot=0 serial_port=0 
Jan 7 10:00:24.151: dsp_encap_config_20: [0:1:8] packet_Len=24 channel_id=4929 
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 r_vpxcc=0x0 
Jan 7 10:00:24.151: dsp_set_playout: [0:1:8] packet_Len=18 channel_id=4929 
 packet_id=76 mode=1 initial=60 min=4 max=200 fax_nom=300 
Jan 7 10:00:24.151: dsp_echo_canceller_control: [0:1:8] 
packet_Len=10 channel_id=4929
 packet_id=66 flags=0x0
Jan 7 10:00:24.151: dsp_set_gains: [0:1:8] packet_Len=12 
channel_id=4929 packet_id=91
 in_gain=0 out_gain=0 
Jan 7 10:00:24.151: dsp_vad_enable: [0:1:8] packet_Len=10 
channel_id=4929 packet_id=78
 thresh=-38
Jan 7 10:00:24.151: dsp_voice_mode: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=73
 coding_type=1 voice_field_size=80 VAD_flag=0 echo_length=64 
comfort_noise=1 
inband_detect=1 digit_relay=2 AGC_flag=0dsp_dtmf_mode
(VTSP_TONE_R2_MF_FORWARD_MODE) 

Jan 7 10:00:24.151: dsp_dtmf_mode: [0:1:8] packet_Len=10 channel_id=4929 
packet_id=65dtmf_or_mf=1

!--- Digit 5 is sent: Forward Signal Group I-5 (First DNIS digit).

Jan 7 10:00:24.203: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN: digit=5,
 rtp_timestamp=0x04030000 dc_digit_up
Jan 7 10:00:24.203: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8)received digit (5)
Jan 7 10:00:24.203: CSM voice (1/60): Rcvd Digit detected(5)
Jan 7 10:00:24.203: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_PRE_CALLERID R2
 Got Event 5

!--- Send Backward Signal Group A-5 (caller category request).

Jan 7 10:00:24.203: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 5
Jan 7 10:00:24.203: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929packet_id=90
 string=5 digits=1, time_on=65435, time_off=30
Jan 7 10:00:24.203:    digit=, components=2, freq_of_first=1020, 
freq_of_second=780,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:24.303: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF:digit=5,
 duration=30dc_digit
Jan 7 10:00:24.303: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) received digit (5)
Jan 7 10:00:24.303: CSM voice (1/60): Rcvd Digit detected(5)
Jan 7 10:00:24.303: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event R2_TONE_OFF

Jan 7 10:00:24.303: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
string=5dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:24.303: dsp_dtmf_dialing: [0:1:8] packet_Len=24 channel_id=4929
 packet_id=90 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:24.303:    digit=, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- Caller Category Forward Signal Group II-1 is sent.

Jan 7 10:00:24.403: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN: digit=1,
 rtp_timestamp=0x001E0010 dc_digit_up
Jan 7 10:00:24.403: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8)received 
digit (1)
Jan 7 10:00:24.403: CSM voice (1/60): Rcvd Digit detected(1)
Jan 7 10:00:24.403: R2 Incoming Voice(1/60): DSX (E1 0:8): STATE:R2_IN_CALLERID R2
 Got Event 1

!--- Send Backward Signal Group A-5 (Caller ID request).

Jan 7 10:00:24.403: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
string=5dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 5
Jan 7 10:00:24.403: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=5 digits=1, time_on=65435, time_off=30
Jan 7 10:00:24.403:    digit=, components=2, freq_of_first=1020, freq_of_second=780,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:24.503: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=1,
 duration=30dc_digit
Jan 7 10:00:24.503: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) received digit (1)
Jan 7 10:00:24.503: CSM voice (1/60): Rcvd Digit detected(1)
Jan 7 10:00:24.503: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event R2_TONE_OFF
Jan 7 10:00:24.503: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
string=5dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:24.503: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:24.503:    digit=, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- First ANI digit is sent: Forward Signal Group I-1.

Jan  7 10:00:24.603: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN:
digit=1, rtp_timestamp=0x001E0010 dc_digit_up
Jan 7 10:00:24.603: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) received digit (1)
Jan 7 10:00:24.603: CSM voice (1/60): Rcvd Digit detected(1)
Jan 7 10:00:24.603: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event 1

!--- Send Backward Signal Group A-5 (Caller ID request).

Jan 7 10:00:24.603: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 5

Jan 7 10:00:24.603: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=5 digits=1, time_on=65435, time_off=30
Jan 7 10:00:24.603:    digit=, components=2, freq_of_first=1020, 
freq_of_second=780,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:24.703: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=1,
 duration=30dc_digit
Jan 7 10:00:24.703: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) received digit (1)
Jan 7 10:00:24.703: CSM voice (1/60): Rcvd Digit detected(1)
Jan 7 10:00:24.703: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event R2_TONE_OFF
Jan 7 10:00:24.703: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:24.703: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:24.703:    digit=, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- Second ANI digit is sent: Forward Signal Group I-2.

Jan 7 10:00:24.803: vtsp_process_dsp_message: 
MSG_TX_DTMF_DIGIT_BEGIN:digit=2,
 rtp_timestamp=0x001E0010 dc_digit_up
Jan 7 10:00:24.803: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) 
received digit (2)
Jan 7 10:00:24.803: CSM voice (1/60): Rcvd Digit detected(2)
Jan 7 10:00:24.803: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event 2

!--- Send Backward Signal Group A-5 (Caller ID request).

Jan 7 10:00:24.803: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 5

Jan 7 10:00:24.803: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929packet_id=90
 string=5 digits=1, time_on=65435, time_off=30
Jan 7 10:00:24.803:    digit=, components=2, freq_of_first=1020, 
freq_of_second=780,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:24.903: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=2,
 duration=30dc_digit
Jan 7 10:00:24.903: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) received digit (2)
Jan 7 10:00:24.903: CSM voice (1/60): Rcvd Digit detected(2)
Jan 7 10:00:24.903: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID
 R2 Got Event R2_TONE_OFF
Jan 7 10:00:24.903: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:24.903: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:24.903:    digit=, components=2, freq_of_first=0, 
freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- Third ANI digit is sent: Forward Signal Group I-3.

Jan 7 10:00:25.003: vtsp_process_dsp_message: 
MSG_TX_DTMF_DIGIT_BEGIN: digit=3,
 rtp_timestamp=0x001E0010 dc_digit_up
Jan 7 10:00:25.003: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) 
received digit (3)
Jan 7 10:00:25.003: CSM voice (1/60): Rcvd Digit detected(3)
Jan 7 10:00:25.003: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event 3

!--- Send Backward Signal Group A-5 (Caller ID request).

Jan 7 10:00:25.003: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 5
 
Jan 7 10:00:25.003: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=5 digits=1, time_on=65435, time_off=30
Jan 7 10:00:25.003:    digit=, components=2, freq_of_first=1020, 
freq_of_second=780,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:25.103: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF:digit=3,
 duration=30dc_digit
Jan 7 10:00:25.103: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) received digit (3)
Jan 7 10:00:25.103: CSM voice (1/60): Rcvd Digit detected(3)
Jan 7 10:00:25.103: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event R2_TONE_OFF
Jan 7 10:00:25.103: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:25.103: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:25.103:    digit=, components=2, freq_of_first=0, 
freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- Digit 15 is sent: Forward Signal Group I-15 (end of ANI digit).

Jan 7 10:00:25.203: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN: 
digit=15,
 rtp_timestamp=0x001E0010 dc_digit_up
Jan 7 10:00:25.203: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) 
received digit (*)
Jan 7 10:00:25.203: CSM voice (1/60): Rcvd Digit detected(*)
Jan 7 10:00:25.203: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CALLERID R2
 Got Event 15

!--- Send Backward Signal Group A-1 (next DNIS digit).

Jan 7 10:00:25.203: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 1
Jan 7 10:00:25.203: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=1 digits=1, time_on=65435, time_off=30
Jan 7 10:00:25.203:    digit=, components=2, freq_of_first=1020, 
freq_of_second=1140,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:25.303: vtsp_process_dsp_message: 
MSG_TX_DTMF_DIGIT_OFF: digit=15,
 duration=30dc_digit
Jan 7 10:00:25.303: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) received digit (*)
Jan 7 10:00:25.303: CSM voice (1/60): Rcvd Digit detected(*)
Jan 7 10:00:25.303: R2 Incoming Voice(1/60): DSX (E1 0:8):
 STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF
Jan 7 10:00:25.303: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=5dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:25.303: dsp_dtmf_dialing: [0:1:8] packet_Len=24 channel_id=4929
 packet_id=90 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:25.303:    digit=, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- Second DNIS digit is sent: Forward Signal Group I-6.

Jan  7 10:00:25.391: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN: digit=6,
 rtp_timestamp=0x001E0010 dc_digit_up
Jan 7 10:00:25.391: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) 
received digit (6)
Jan 7 10:00:25.391: CSM voice (1/60): Rcvd Digit detected(6)
Jan 7 10:00:25.391: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_COLLECT_DNIS
 R2 Got Event 6

!--- Send Backward Signal Group A-1.

Jan 7 10:00:25.391: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
string=56dc_dial()
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 1

Jan 7 10:00:25.391: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=1 digits=1, time_on=65435, time_off=30
Jan 7 10:00:25.391:    digit=, components=2, freq_of_first=1020, 
freq_of_second=1140,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:25.491: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF:digit=6,
 duration=30dc_digit
Jan 7 10:00:25.491: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) received digit (6)
Jan 7 10:00:25.491: CSM voice (1/60): Rcvd Digit detected(6)
Jan 7 10:00:25.491: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE: R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF
Jan 7 10:00:25.491: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
string=56dc_dial() vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:25.491: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:25.491:    digit=, components=2, freq_of_first=0, 
freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- Third DNIS digit is sent: Forward Signal Group I-7.

Jan 7 10:00:25.583: vtsp_process_dsp_message: 
MSG_TX_DTMF_DIGIT_BEGIN: digit=7,
 rtp_timestamp=0x001E0010 dc_digit_up
Jan 7 10:00:25.583: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) 
received digit (7)
Jan 7 10:00:25.583: CSM voice (1/60): Rcvd Digit detected(7)
Jan 7 10:00:25.583: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event 7

!--- Send Backward Signal Group A-1.

Jan 7 10:00:25.583: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=567dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 1

Jan 7 10:00:25.583: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=1 digits=1, time_on=65435, time_off=30
Jan 7 10:00:25.583:    digit=, components=2, freq_of_first=1020, 
freq_of_second=1140,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:25.683: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=7,
 duration=30dc_digit
Jan 7 10:00:25.683: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) 
received digit (7)
Jan 7 10:00:25.683: CSM voice (1/60): Rcvd Digit detected(7)
Jan 7 10:00:25.683: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_OFF
Jan 7 10:00:25.683: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
 string=567dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = #
Jan 7 10:00:25.683: dsp_dtmf_dialing: [0:1:8] packet_Len=24 
channel_id=4929 packet_id=90
 string=# digits=1, time_on=150, time_off=30
Jan 7 10:00:25.683:    digit=, components=2, freq_of_first=0, 
freq_of_second=0,
 amp_of_first=1, amp_of_second=1
Jan 7 10:00:25.835: vtsp_process_dsp_message: MSG_TX_DIALING_DONEdc_dialing_done()

!--- Timeout is 3 seconds.

Jan 7 10:00:28.583: R2 Incoming Voice(1/60): DSX (E1 0:8):
 STATE:R2_IN_COLLECT_DNIS R2
 Got Event R2_TONE_TIMER

!--- Send Backward Signal Group A-3: address-complete, changeover !--- to reception of group-B signal.

Jan 7 10:00:28.583: vtsp_r2_generate_digits: vdev_common=0x6205E5F8,
 string=567dc_dial()vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = 3#
Jan 7 10:00:28.583: dsp_dtmf_dialing: [0:1:8] packet_Len=36 
channel_id=4929 packet_id=90
 string=3# digits=2, time_on=150, time_off=30
Jan 7 10:00:28.583:    digit=, components=2, freq_of_first=1020, 
freq_of_second=900,
 amp_of_first=8192, amp_of_second=8192
Jan 7 10:00:28.583:    digit=, components=2, freq_of_first=0, freq_of_second=0,
 amp_of_first=1, amp_of_second=1

!--- Forward Signal Group II-1 is sent: subscriber without priority.

Jan 7 10:00:28.831: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN: digit=1,
 rtp_timestamp=0x001E0003 dc_digit_up
Jan 7 10:00:28.831: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) 
received digit (1)
Jan 7 10:00:28.831: CSM voice (1/60): Rcvd Digit detected(1)
Jan 7 10:00:28.831: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_CATEGORY R2
 Got Event 1
Jan 7 10:00:28.831: CSM_PROC_IC1_COLLECT_ADDR_INFO: 
CSM_EVENT_ADDR_INFO_COLLECTED
(DNIS=567, ANI=123) at slot 1, port 60
Jan 7 10:00:28.831: vtsp_tsp_call_accept_check (sdb=0x61DADEE0, 
calling_number=123
 called_number=567): peer_tag=0
Jan 7 10:00:28.835: VDEV_ALLOCATE: failed to allocate a device
Jan 7 10:00:28.835: VDEV_ALLOCATE_ALMOST_READY: failed to allocate
 a non-idle modem
Jan 7 10:00:28.835: VDEV_ALLOCATE: failed to allocate a device
Jan 7 10:00:28.835: VDEV_ALLOCATE_ALMOST_READY: failed to allocate 
a non-idle modem
Jan 7 10:00:28.835: VDEV_ALLOCATE: failed to allocate a device
Jan 7 10:00:28.835: VDEV_ALLOCATE_ALMOST_READY: failed to allocate 
a non-idle modem
Jan 7 10:00:28.835: CSM_PROC_IC3_WAIT_FOR_RES_RESP: CSM_EVENT_RESOURCE_OK 
at slot 1,
 port 60
Jan 7 10:00:28.835: vtsp_IC_switch : (voice_vdev= 0x61F19688)
Jan 7 10:00:28.835: vtsp_tsp_call_switch_ind (cdb=0x61B5BFF8, 
tsp_info=0x61F19688,
 calling_number=123 called_number=567 redirect_number=):
peer_tag=123dc_switch: fsm_pop()
Jan 7 10:00:28.835: vtsp_do_call_setup_ind
Jan 7 10:00:28.835: vtsp_do_call_setup_ind: Call ID=65581, 
guid=62031A88
Jan 7 10:00:28.835: vtsp_do_call_setup_ind: type=0, under_spec=0, 
name=b`, id0=9,
 id1=0, id2=0, calling=123, called=567
Jan 7 10:00:28.835: dsp_cp_tone_off: [] packet_Len=8 channel_id=4929 
packet_id=71
Jan 7 10:00:28.835: dsp_idle_mode: [] packet_Len=8 channel_id=4929 
packet_id=68
Jan 7 10:00:28.835: dsp_close_voice_channel: [] packet_Len=8 
channel_id=4929 packet_id=75
Jan 7 10:00:28.835: vtsp_timer_stop: 7063006
Jan 7 10:00:28.839: csm_vtsp_call_setup_resp (vdev_info=0x61F19688, 
vtsp_cdb=0x61B5BFF8)
Jan 7 10:00:28.839: csm_vtsp_call_setup_resp:vdev_common BP TS 
allocatedat BP_stream0,
 BP_Ch8
Jan 7 10:00:28.839: csm_vtsp_call_setup_resp:DST_tdm_chnl call.
 BP TS allocatedat stream 5, chan 13,BP_stream 0, BP_ch 8
Jan 7 10:00:28.839: csm_vtsp_call_setup_resp:DST_tdm_chnl call.
 BP TS allocatedat stream 5, chan 13,BP_stream 0, BP_ch 
8vtsp_open_voice_and_set_params
Jan 7 10:00:28.839: dsp_close_voice_channel: [0:1 (17)] 
packet_Len=8 channel_id=4929
 packet_id=75
Jan 7 10:00:28.839: dsp_open_voice_channel_20: [0:1 (17)] packet_Len=16 
channel_id=4929
 packet_id=74 alaw_ulaw_select=1 associated_signaling_channel=0 
time_slot=0 serial_port=0
Jan 7 10:00:28.839: dsp_encap_config_20: [0:1 (17)] packet_Len=24 
channel_id=4929
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0t_vpxcc=0x0 
r_vpxcc=0x0
Jan 7 10:00:28.839: dsp_set_playout: [0:1 (17)] packet_Len=18 
channel_id=4929 packet_id=76 mode=1 initial=60 min=4 max=200 fax_nom=300
Jan 7 10:00:28.839: dsp_echo_canceller_control: [0:1 (17)] 
packet_Len=10 channel_id=4929
 packet_id=66 flags=0x0
Jan 7 10:00:28.839: dsp_set_gains: [0:1 (17)] packet_Len=12 
channel_id=4929 packet_id=91
 in_gain=0 out_gain=0
Jan 7 10:00:28.839: dsp_vad_enable: [0:1 (17)] packet_Len=10 
channel_id=4929 packet_id=78
 thresh=-38act_proceeding
Jan 7 10:00:28.839: csm_vtsp_call_proceeding:DST_tdm_chnl call. 
BP TS allocatedstream 5,
 chan 13,BP_stream 0, BP_ch 8act_alert
Jan 7 10:00:28.867: vtsp_ring_noan_timer_start: 7063009 
Jan 7 10:00:28.867: csm_vtsp_call_alert (vtsp_cdb=0x61B5BFF8)
Jan 7 10:00:28.867:  csm_vtsp_call_alert: CSM_EVENT_ALERTING_RECEIVED
Jan 7 10:00:28.867: CSM_IC5_WAIT_FOR_SWITCH_OVER:  at slot 1, port 60
Jan 7 10:00:28.867: CSM_EVENT_ALERTING_RECEIVED:
Jan 7 10:00:28.867:  calling alerting_start_event

!--- Note: For modems, Backward Signal !--- Group B-6 (subscriber's line free, charge) !--- is sent immediately. !--- For voice, it is delayed until alerting is received. !--- Notice that "R2_REJECT" is printed instead of R2_ALERTING. !--- This printing issue is solved in Cisco IOS Software Release 12.1T.

Jan 7 10:00:28.867: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE:R2_IN_IDLE R2
 Got Event R2_REJECT
Jan 7 10:00:28.867:  R2_ALERTING: r2_comp_idle
Jan 7 10:00:28.867: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
string=567act_bridge
Jan 7 10:00:28.867: dsp_voice_mode: [0:1 (17)] packet_Len=24 
channel_id=4929 packet_id=73
 coding_type=1 voice_field_size=80 VAD_flag=0 echo_length=64 
comfort_noise=1
 inband_detect=1 digit_relay=2 AGC_flag=0dsp_dtmf_mode 
(VTSP_TONE_R2_MF_FORWARD_MODE)

!--- Answer signal (B-6) is sent after alerting is received. !--- Send Backward Signal Group B6 signal (Subscriber's line free, charge).

Jan 7 10:00:28.871: dsp_dtmf_mode: [0:1 (17)] packet_Len=10 
channel_id=4929 packet_id=65
 dtmf_or_mf=1vtsp_r2_dial vtsp_r2_dial(): fsm_push(vtsp_r2_state_table)
 dsp_dtmf_dialing(): dial_string = 6

Jan 7 10:00:28.871: dsp_dtmf_dialing: [0:1 (17)] packet_Len=24 
channel_id=4929 
 packet_id=90 string=6 digits=1, time_on=65435, time_off=30 
Jan 7 10:00:28.871:    digit=, components=2, freq_of_first=900, 
freq_of_second=780,
 amp_of_first=8192, amp_of_second=8192 
Jan 7 10:00:28.923: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_BEGIN: digit=1,
 rtp_timestamp=0x001E0006 dc_digit_up 
Jan 7 10:00:28.923: csm_vtsp_digit_ready_up (vtsp_cdb=0x61B5BFF8) 
received digit (1) 
Jan 7 10:00:28.923: CSM voice (1/60): Rcvd Digit detected(1) 
Jan 7 10:00:28.923: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE: R2_IN_COMPLETE
 R2 Got Event 1 
Jan 7 10:00:28.971: vtsp_process_dsp_message: MSG_TX_DTMF_DIGIT_OFF: digit=1,
 duration=30dc_digit 
Jan 7 10:00:28.971: csm_vtsp_digit_ready (vtsp_cdb=0x61B5BFF8) 
received digit (1) 
Jan 7 10:00:28.971: CSM voice (1/60): Rcvd Digit detected(1)
Jan 7 10:00:28.971: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE: R2_IN_COMPLETE R2
 Got Event R2_TONE_OFF 
Jan 7 10:00:28.971: vtsp_r2_generate_digits: vdev_common=0x6205E5F8, 
string=567dc_dial() 
 vtsp_dial_nopush dsp_dtmf_dialing(): dial_string = # 
Jan 7 10:00:28.971: dsp_dtmf_dialing: [0:1 (17)] packet_Len=24 
channel_id=4929 
 packet_id=90 string=# digits=1, time_on=150, time_off=30 
Jan 7 10:00:28.975:    digit=, components=2, freq_of_first=0, 
freq_of_second=0,
 amp_of_first=1, amp_of_second=1ds_dialing_defaultds_dialing_default 
Jan 7 10:00:29.127: vtsp_process_dsp_message: 
MSG_TX_DIALING_DONEdc_dialing_done() 
Jan 7 10:00:29.971: R2 Incoming Voice(1/60): DSX (E1 0:8): 
STATE: R2_IN_WAIT_GUARD R2
 Got Event R2_TONE_TIMER 
Jan 7 10:00:29.971:  R2_IN_IDLE:2 r2_in_connect called 
Jan 7 10:00:29.971: R2_IN_CONNECT: call end dial 
Jan 7 10:00:29.971:  pop the dial state machine 
Jan 7 10:00:29.971: vtsp_r2_end_dial: vdev_common=0x6205E5F8, 
string=567ds_end_dial(): 
 fsm_pop() act_caps_ind 
Jan 7 10:00:29.971: act_caps_ind:Encap 1, Vad 2, Codec 0x4, 
CodecBytes 20, FaxRate 2,
 FaxBytes 20 SignalType 0 DtmfRelay 1, Modem 1act_caps_ack 
Jan 7 10:00:29.971: dsp_idle_mode: [0:1 (17)] packet_Len=8 
channel_id=4929 packet_id=68 
Jan 7 10:00:29.971: act_caps_ack: codec = 15, ret = 1
Jan 7 10:00:29.971: dsp_cp_tone_off: [0:1 (17)] packet_Len=8 
channel_id=4929 packet_id=71 
Jan 7 10:00:29.971: dsp_idle_mode: [0:1 (17)] packet_Len=8 
channel_id=4929 packet_id=68 
Jan 7 10:00:29.971: dsp_encap_config_20: [0:1 (17)] packet_Len=24 
channel_id=4929 
 packet_id=92 TransportProtocol 2 t_ssrc=0x0 r_ssrc=0x0 t_vpxcc=0x0 
r_vpxcc=0x0 
Jan 7 10:00:29.971: dsp_voice_mode: [0:1 (17)] packet_Len=24 
channel_id=4929 packet_id=73
 coding_type=19 voice_field_size=20 VAD_flag=1 echo_length=64 
comfort_noise=1
 inband_detect=1 digit_relay=2 AGC_flag=0act_alert_connect 
Jan 7 10:00:30.255: vtsp_ring_noan_timer_stop: 7063148 
Jan 7 10:00:30.255: dsp_cp_tone_off: [0:1 (17)] packet_Len=8 
channel_id=4929 packet_id=71 
Jan 7 10:00:30.255: csm_vtsp_call_connect (vtsp_cdb=0x61B5BFF8, 
voice_vdev=0x61F19688) 
Jan 7 10:00:30.255: CSM_IC5_WAIT_FOR_SWITCH_OVER: 
CSM_EVENT_MODEM_OFFHOOK at slot 1,
 port 60 
Jan 7 10:00:30.607: CSM_RX_CAS_EVENT_FROM_NEAT:(0007):  
EVENT_CHANNEL_CONNECTED at slot 1
 and port 60 
Jan 7 10:00:30.607: CSM_PROC_IC6_WAIT_FOR_CONNECT: 
CSM_EVENT_DSX0_CONNECTED at slot 1,
 port 60 
Jan 7 10:00:30.607: from NEAT(0): (0/8): TX ANSWERED (ABCD=0101) 
eefje#

関連情報

このドキュメントは役に立ちましたか?

Feedbackフィードバック

シスコに問い合わせ