Configuración de IPSec de router a router, Pre-shared, Sobrecarga de NAT entre redes privadas.

Opciones de descarga

PDF (332.2 KB)
Visualice con Adobe Reader en una variedad de dispositivos
ePub (102.2 KB)
Visualice en diferentes aplicaciones en iPhone, iPad, Android, Sony Reader o Windows Phone
Mobi (Kindle) (98.6 KB)
Visualice en dispositivo Kindle o aplicación Kindle en múltiples dispositivos

Actualizado:14 de enero de 2008

ID del documento:7276

Lenguaje no discriminatorio

El conjunto de documentos para este producto aspira al uso de un lenguaje no discriminatorio. A los fines de esta documentación, "no discriminatorio" se refiere al lenguaje que no implica discriminación por motivos de edad, discapacidad, género, identidad de raza, identidad étnica, orientación sexual, nivel socioeconómico e interseccionalidad. Puede haber excepciones en la documentación debido al lenguaje que se encuentra ya en las interfaces de usuario del software del producto, el lenguaje utilizado en función de la documentación de la RFP o el lenguaje utilizado por un producto de terceros al que se hace referencia. Obtenga más información sobre cómo Cisco utiliza el lenguaje inclusivo.

Acerca de esta traducción

Cisco ha traducido este documento combinando la traducción automática y los recursos humanos a fin de ofrecer a nuestros usuarios en todo el mundo contenido en su propio idioma. Tenga en cuenta que incluso la mejor traducción automática podría no ser tan precisa como la proporcionada por un traductor profesional. Cisco Systems, Inc. no asume ninguna responsabilidad por la precisión de estas traducciones y recomienda remitirse siempre al documento original escrito en inglés (insertar vínculo URL).

Contenido

Introducción

Prerequisites

Requirements

Componentes Utilizados

Convenciones

Configurar

Diagrama de la red

Configuraciones

Verificación

Troubleshoot

Comandos para resolución de problemas

Información Relacionada

Introducción

Este ejemplo de configuración muestra cómo cifrar el tráfico entre dos redes privadas (10.50.50.x y 10.103.1.x) usando IPSec. Las redes se conocen entre sí por sus direcciones privadas.

Prerequisites

Requirements

No hay requisitos específicos para este documento.

Componentes Utilizados

La información que contiene este documento se basa en las siguientes versiones de software y hardware.

Versión 12.3.1a del software del IOS® de Cisco
Cisco 2691 Routers

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Router A
Router B

Router A
Router_A#write terminal Building configuration... Current configuration : 1638 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router_A ! boot system flash:c2691-ik9o3s-mz.123-1a.bin ! ip subnet-zero ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! crypto isakmp policy 1 hash md5 authentication pre-share crypto isakmp key cisco123 address 95.95.95.2 ! crypto ipsec transform-set rtpset esp-des esp-md5-hmac ! crypto map rtp 1 ipsec-isakmp set peer 95.95.95.2 set transform-set rtpset !--- Include the private network to private network traffic !--- in the encryption process. match address 115 ! no voice hpi capture buffer no voice hpi capture destination ! interface FastEthernet0/0 ip address 99.99.99.2 255.255.255.0 ip nat outside duplex auto speed auto crypto map rtp ! interface FastEthernet0/1 ip address 10.50.50.50 255.255.255.0 ip nat inside duplex auto speed auto ! !--- Except the private network traffic from the !--- Network Address Translation (NAT) process. ip nat inside source route-map nonat interface FastEthernet0/0 overload ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 99.99.99.1 ! !--- Except the private network traffic from the NAT process. access-list 110 deny ip 10.50.50.0 0.0.0.255 10.103.1.0 0.0.0.255 access-list 110 permit ip 10.50.50.0 0.0.0.255 any !--- Include the private network to private network traffic !--- in the encryption process. access-list 115 permit ip 10.50.50.0 0.0.0.255 10.103.1.0 0.0.0.255 ! !--- Except the private network traffic from the NAT process. route-map nonat permit 10 match ip address 110 ! dial-peer cor custom ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! end Router_A#

Router A

Router_A#write terminal
Building configuration...
Current configuration : 1638 bytes 
! 
version 12.3 
service timestamps debug datetime msec 
service timestamps log datetime msec 
no service password-encryption 
! 
hostname Router_A 
! 
boot system flash:c2691-ik9o3s-mz.123-1a.bin 
! 
ip subnet-zero 
! 
ip audit notify log 
ip audit po max-events 100 
no ftp-server write-enable 
! 
crypto isakmp policy 1 
hash md5  
authentication pre-share 
crypto isakmp key cisco123 address 95.95.95.2 
! 
crypto ipsec transform-set rtpset esp-des esp-md5-hmac  
! 
crypto map rtp 1 ipsec-isakmp  
set peer 95.95.95.2 
set transform-set rtpset  

!--- Include the private network to private network traffic !--- in the encryption process. 

match address 115 
! 
no voice hpi capture buffer 
no voice hpi capture destination  
!  
interface FastEthernet0/0 
ip address 99.99.99.2 255.255.255.0 
ip nat outside 
duplex auto 
speed auto 
crypto map rtp 
! 
interface FastEthernet0/1 
ip address 10.50.50.50 255.255.255.0 
ip nat inside 
duplex auto 
speed auto 
! 

!--- Except the private network traffic from the !--- Network Address Translation (NAT) process. 

ip nat inside source route-map nonat interface FastEthernet0/0 overload 
ip http server 
no ip http secure-server 
ip classless 
ip route 0.0.0.0 0.0.0.0 99.99.99.1 
! 

!--- Except the private network traffic from the NAT process.
 
access-list 110 deny ip 10.50.50.0 0.0.0.255 10.103.1.0 0.0.0.255 
access-list 110 permit ip 10.50.50.0 0.0.0.255 any 

!--- Include the private network to private network traffic !--- in the encryption process. 

access-list 115 permit ip 10.50.50.0 0.0.0.255 10.103.1.0 0.0.0.255 
! 

!--- Except the private network traffic from the NAT process. 

route-map nonat permit 10 
match ip address 110 
! 
dial-peer cor custom 
! 
line con 0 
exec-timeout 0 0 
line aux 0 
line vty 0 4 
login 
! 
end  
  
Router_A#

Router B
Router_B#write terminal Building configuration... Current configuration : 1394 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router_B ! boot system flash:c2691-ik9o3s-mz.123-1a.bin ! ip subnet-zero ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! crypto isakmp policy 1 hash md5 authentication pre-share crypto isakmp key cisco123 address 99.99.99.2 ! crypto ipsec transform-set rtpset esp-des esp-md5-hmac ! crypto map rtp 1 ipsec-isakmp set peer 99.99.99.2 set transform-set rtpset !--- Include the private network to private network traffic !--- in the encryption process. match address 115 ! no voice hpi capture buffer no voice hpi capture destination ! interface FastEthernet0/0 ip address 95.95.95.2 255.255.255.0 ip nat outside duplex auto speed auto crypto map rtp ! interface FastEthernet0/1 ip address 10.103.1.75 255.255.255.0 ip nat inside duplex auto speed auto ! !--- Except the private network traffic from the NAT process. ip nat inside source route-map nonat interface FastEthernet0/0 overload ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 95.95.95.1 ! !--- Except the private network traffic from the NAT process. access-list 110 deny ip 10.103.1.0 0.0.0.255 10.50.50.0 0.0.0.255 access-list 110 permit ip 10.103.1.0 0.0.0.255 any !--- Include the private network to private network traffic !--- in the encryption process. access-list 115 permit ip 10.103.1.0 0.0.0.255 10.50.50.0 0.0.0.255 ! !--- Except the private network traffic from the NAT process. route-map nonat permit 10 match ip address 110 ! dial-peer cor custom ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! end Router_B#

Router B

Router_B#write terminal
Building configuration...
Current configuration : 1394 bytes 
! 
version 12.3 
service timestamps debug datetime msec 
service timestamps log datetime msec 
no service password-encryption 
! 
hostname Router_B 
! 
boot system flash:c2691-ik9o3s-mz.123-1a.bin 
! 
ip subnet-zero 
! 
ip audit notify log 
ip audit po max-events 100 
no ftp-server write-enable 
! 
crypto isakmp policy 1 
hash md5  
authentication pre-share 
crypto isakmp key cisco123 address 99.99.99.2 
! 
crypto ipsec transform-set rtpset esp-des esp-md5-hmac 
! 
crypto map rtp 1 ipsec-isakmp  
set peer 99.99.99.2 
set transform-set rtpset  

!--- Include the private network to private network traffic !--- in the encryption process.
 
match address 115 
! 
no voice hpi capture buffer 
no voice hpi capture destination  
! 
interface FastEthernet0/0 
ip address 95.95.95.2 255.255.255.0 
ip nat outside 
duplex auto 
speed auto 
crypto map rtp 
! 
interface FastEthernet0/1 
ip address 10.103.1.75 255.255.255.0 
ip nat inside 
duplex auto 
speed auto 
! 

!--- Except the private network traffic from the NAT process.
 
ip nat inside source route-map nonat interface FastEthernet0/0 overload 
ip http server 
no ip http secure-server 
ip classless 
ip route 0.0.0.0 0.0.0.0 95.95.95.1 
! 

!--- Except the private network traffic from the NAT process. 

access-list 110 deny ip 10.103.1.0 0.0.0.255 10.50.50.0 0.0.0.255 
access-list 110 permit ip 10.103.1.0 0.0.0.255 any 

!--- Include the private network to private network traffic !--- in the encryption process. 

access-list 115 permit ip 10.103.1.0 0.0.0.255 10.50.50.0 0.0.0.255 
! 

!--- Except the private network traffic from the NAT process. 

route-map nonat permit 10 
match ip address 110 
! 
dial-peer cor custom 
! 
line con 0 
exec-timeout 0 0 
line aux 0 
line vty 0 4 
login 
! 
end 
Router_B#

debug crypto ipsec sa: muestra las negociaciones IPSec de la fase 2.
debug crypto isakmp sa: muestra las negociaciones de la fase 1 de la Asociación de Seguridad de Internet y del Protocolo de administración de claves (ISAKMP).
debug crypto engine: muestra las sesiones cifradas.