- About this Guide
- Overview
- Configuring User Plane in CUPS
- Monitoring and Troubleshooting User Plane in CUPS
- 1:1 User Plane Redundancy for 4G CUPS
- 5G NSA for SAEGW in CUPS
- Access Control Lists
- ADC Over Gx
- Addition of IP Pool in IP Group
- APN ACL Support
- APN AMBR Traffic Policing
- APN Data Tunnel MTU Size Configuration
- App-based Tethering Detection in User Plane
- APN and APN Profile-Based User Plane Selection for CUPS
- Cisco Ultra Traffic Optimization with VPP
- Charging Action Configuration Change Support for Existing Sessions Gy and Gz Interface
- Dedicated Bearer Establishment without PCRF
- Disable Radius Accounting
- Default and Dedicated Bearer Support for Pure-P and Collapsed Sessions
- Device ID in EDNS0 Records
- DSCP Markings For Collapse Calls
- Dynamic and ADC Charging Rule Names
- Dynamic APN and IP Pool Support
- Dynamic User Plane Selection
- ECS Regular Expression Support
- End Marker Packets
- Enterprise Onboarding in CUPS
- Event-based CDRs for CUPS
- Event Data Records in CUPS
- Error Indication and GTPU Path Failure Detection
- Firewall Support in CUPS
- Gx-alias Enhancement
- Gy Multiple MSCC and FUI-Redirection
- ICSR Bulk Statistics
- Idle Timer for SAE-GW Sessions
- IFTASK Hyperthreading
- Indirect Forwarding Tunnel
- IP Pool Management
- IP Source Violation
- IPSec in CUPS
- L2 Marking Support
- L3, L4, and L7 Rule Combination in Ruledef
- L7 PCC Rules
- Local Policy in CUPS
- Load/Overload and UP Data Throttling Support on Sx
- LTE - Wi-Fi Seamless Handover in CUPS
- Monitor Subscriber for CUPS
- MPLS Support on VPC-SI for CUPS
- Multiple Control Plane Support on User Plane
- Multiple UP Group Support
- MOCN Special Handling of CRA and CNR
- N+2 UP Recovery
- NAT Support
- NAT ALG Support
- N : M Redundancy
- Netloc and RAN/NAS Cause Code
- Network Provided Location Indication
- Nexthop Forwarding Support IPv4/v6 Address
- Network Trigerred Service Restoration
- NSO-based Configuration Management
- NSO Orchestration for 4G CUPS
- NSH Traffic Steering
- Packet Flow Description Management Procedure for Static and Predefined Rules
- PDI Optimization
- P-GW CDR in CUPS
- P-GW Restart Notification
- Post Processing Interaction for DCCA
- Priority Recovery Support for VoLTE Calls
- QoS Group of Ruledefs Support
- Rate Limiting Function (RLF)
- S2a Interface Support
- S2b Interface Support
- S-GW CDR in CUPS
- S-GW New Call Rejection
- S-GW Session Idle Timeout
- SAEGW Idle Buffering with DDN Delay and DDN Throttling
- Self-overload Detection and Admission Control of Sx at UP
- Smart Licensing
- Software Management Operations
- Standard QCI Support
- Static and Predefined Rule Match Support for Shallow Packet Inspection
- Static IP Assignment from RADIUS
- Suspend and Resume Notification for Pure-S Calls
- TACACS+ Over IPSec
- Tariff Time Support
- UP Call Summary Log
- URL Blacklisting
- User Plane Selection based on TAC Range
- User Plane Node Bring Down Procedure
- Virtual APN in CUPS
- VoLTE Support in CUPS
- Volume Reporting over Gx
- VPN Manager Recovery Support
- VPP Support
- VRF Support for CUPS
- X-Header Insertion and Encryption
Ultra Packet Core CUPS User Plane Administration Guide, Release 21.25
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 3, 2023
Feedback