- About this Guide
- Overview
- Configuring Control Plane in CUPS
- Monitoring and Troubleshooting Control Plane in CUPS
- 5G NSA for SAEGW in CUPS
- ADC Over Gx
- Addition of IP Pool in IP Group
- APN ACL Support
- APN AMBR Traffic Policing
- APN Data Tunnel MTU Size Configuration
- APN and APN Profile-Based User Plane Selection for CUPS
- Bearer Inactivity Timeout
- Bulk Statistics Support
- Cisco Ultra Traffic Optimization with VPP
- Change Notification Support for Pure S
- Charging Action Configuration Change Support for Existing Sessions Gy and Gz Interface
- CP Call Summary Log
- Dedicated Bearer Establishment without PCRF
- Disable Radius Accounting
- DSCP Markings For Collapse Calls
- Dynamic and ADC Charging Rule Names
- Dynamic APN and IP Pool Support
- Dynamic User Plane Selection
- ECS Regular Expression Support
- End Marker Packets
- Enterprise Onboarding in CUPS
- Event-based CDRs for CUPS
- Event Data Records in CUPS
- Error Indication and GTPU Path Failure Detection
- Firewall Support in CUPS
- GGSN in CUPS
- Gx-alias Enhancement
- Gy Multiple MSCC and FUI-Redirection
- ICSR Bulk Statistics
- Idle Timer for SAE-GW Sessions
- Indirect Forwarding Tunnel
- IP Pool Management
- L2 Marking Support
- L3, L4, and L7 Rule Combination in Ruledef
- Local Policy in CUPS
- Load/Overload and UP Data Throttling Support on Sx
- LTE - Wi-Fi Seamless Handover in CUPS
- Monitor Subscriber for CUPS
- MPLS Support on VPC-SI for CUPS
- Multiple Control Plane Support on User Plane
- MOCN Special Handling of CRA and CNR
- NAT Support
- NAT ALG Support
- Netloc and RAN/NAS Cause Code
- Network Trigerred Service Restoration
- Network Provided Location Indication
- Nexthop Forwarding Support IPv4/v6 Address
- NSH Traffic Steering
- PDI Optimization
- P-GW CDR in CUPS
- P-GW Restart Notification
- Post Processing Interaction for DCCA
- Priority Recovery Support for VoLTE Calls
- QoS Group of Ruledefs Support
- RADIUS in C-Plane
- Rate Limiting Function (RLF)
- S2a Interface Support
- S2b Interface Support
- S6b Support
- S-GW CDR in CUPS
- S-GW New Call Rejection
- SAEGW Idle Buffering with DDN Delay and DDN Throttling
- Secondary RAT Usage During GnGp Handover
- Self-overload Detection and Admission Control of Sx at UP
- Smart Licensing
- Software Management Operations
- Standard QCI Support
- Static IP Assignment from RADIUS
- Support for Duplicate New Call
- Suspend and Resume Notification for Pure-S Calls
- TACACS+ Over IPSec
- Tariff Time Support
- URL Blacklisting
- User Plane Node Bring Down Procedure
- Virtual APN in CUPS
- VoLTE Support in CUPS
- Volume Reporting over Gx
- VPP Support
- VRF Support for CUPS
Ultra Packet Core CUPS Control Plane Administration Guide, Release 21.24
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 3, 2023
Feedback