Readme for Cisco Unity Connection Release 14 Service Update 4

This readme file contains installation and support information for Cisco Unity Connection Release 14 Service Update 4.

Requirements

Determining the Software Version

Determine Version of Cisco Unity Connection Application

This section contains two procedures. Use the applicable procedure, depending on whether you want to use Unity Connection Administration or a command-line interface (CLI) session to determine the version.

Using Cisco Unity Connection Administration
Procedure

In Cisco Unity Connection Administration, in the upper-right corner below the Navigation list, select About.

The Unity Connection version is displayed below “Cisco Unity Connection Administration.”

Using the Command-Line Interface
Procedure

Step 1

Start a command-line interface (CLI) session. (For more information, see Cisco Unified Operating System Administration Help.)

Step 2

Run the show cuc version command.


Determine Version of Cisco Personal Communications Assistant Application

Using Cisco Personal Communications Assistant Application
Procedure

Step 1

Sign in to the Cisco PCA.

Step 2

On the Cisco PCA Home page, select About in the upper right corner to display Cisco Unity Connection version.

Step 3

The Cisco PCA version is the same as the Unity Connection version.


Determine Version of Cisco Unified Communications Operating System

Use the applicable procedure.

Using Cisco Unified Operating System Administration
Procedure

In Cisco Unified Operating System Administration, the System Version is displayed below “Cisco Unified Operating System Administration” in the blue banner on the page that appears after you sign in.


Using the Command-Line Interface
Procedure

Step 1

Start a command-line interface (CLI) session. (For more information, see Cisco Unified Operating System Administration Help.)

Step 2

Run the show version active command.


Version and Description

Cisco Unity Connection 14SU4 is a cumulative update that incorporates all of the fixes and changes to Cisco Unity Connection version 14 — including the operating system and components shared by Cisco Unity Connection and Cisco Unified CM. It also incorporates additional changes that are specific to this service update.

To determine the full version number of the Cisco Unified Communications Operating System that is currently installed on the active partition, run the CLI show version active command.

Full version numbers include the build number (for example, 14.0.1.14900-36), the software versions listed on the download pages on Cisco.com are abbreviated version numbers (for example, 14 ).

Do not refer to version numbers in any of the administration user interfaces because those versions apply to the interfaces themselves, not to the version installed on the active partition.

New and Changed Support or Functionality

This section contains all new and changed support or functionality for release 14SU4 and later.


Note


The new locales for Unity Connection 14 SU4 have been released and available on Download Software site at https://software.cisco.com/download/home/282421576/type.

Speechview Transcription using Cisco Webex In House Transcription

Cisco Unity Connection supports the Speechview functionality with a third party transcription service, which converts the voice message to text and the transcribed text is sent to the user along with the voice message. With Release 14SU4 and later, Unity Connection uses the Cisco Webex in-house transcription service for transcription of voice messages.


Note


Thirdparty transcription service will be EOL by Decemeber 30,2024. Hence customers are advised to upgrade to 14SU4 or later releases. For more information see Field Notice: FN74144 - Cisco Unity Connection SpeechView Transcription Service Will Stop Working after December 30, 2024 - Software Upgrade Recommended - Cisco


For more information, see chapter "SpeechView Cisco Webex in-house Transcription Service" of the System Administration Guide guide available at https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/14/administration/guide/b_14cucsag.html

Important Notes

Warning for Upgrades to 15

The Upgrades from version 14 SU4 to any Cisco Unity Connection release 15 versions lower than 15SU2 are not allowed and will not be displayed as valid upgrade options. Customers upgrading from this SU should choose 15SU2 or higher as their target upgrade.

Warning for Upgrades from 10.5(2)

Direct upgrade from versions 10.5(2) to 14SU4 is not supported. To upgrade from version 10.5(2) to 14SU4, you must follow an intermediate upgrade path such as going from 10.5(2) to 12.x or later and then from 12.x or later to 14SU4.

Warning for Upgrades with FIPS Enabled

If you are upgrading with FIPS enabled, see the CiscoSSL7 COP File Readme for information on the COP file ciscocm.ciscossl7_upgrade_CSCwa48315_CSCwa77974_v1.0.k4.cop.sha512. This document details the pre-requisites required for direct upgrade or direct migration to the 14SU4 destination versions when FIPS is enabled.

Related Documentation

Installation Information

For instructions on downloading the service update, see the "Downloading Cisco Unity Connection Release 14 SU4 Software" section.

For instructions on installing the service update on Cisco Unity Connection, see the “Upgrading Cisco Unity Connection” chapter of the Install, Upgrade, and Maintenance Guide for Cisco Unity Connection Release 14 at https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/14/install_upgrade/guide/b_14cuciumg/b_14cuciumg_chapter_010.html.


Note


If you are performing an upgrade from a FIPS enabled Cisco Unity Connection release to Cisco Unity Connection 14 SU4, make sure to follow the steps for regenerating certificates before using any pre-existing telephony integrations. To learn how to regenerate certificates, see the Regenerating Certificates for FIPS section of the "FIPS Compliance in Cisco Unity Connection" chapter of the Security Guide for Cisco Unity Connection Release 14SU4 at https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/14/security/guide/b_14cucsecx.html

Downloading Cisco Unity Connection Release 14 Service Update 4 Software


Note


The service update files can be used to upgrade Cisco Unity Connection. The files can be downloaded from the Unity Connection downloads page.

Caution


With restricted and unrestricted versions of Cisco Unity Connection software now available, download software carefully. Upgrading a restricted version to an unrestricted version is supported, but future upgrades are then limited to unrestricted versions. Upgrading an unrestricted version to a restricted version is not supported. For more information on restricted and unrestricted versions of Unity Connection software, see the Downloading a VMware OVA Template for a Unity Connection 14 Virtual Machine of the Release Notes for Cisco Unity Connection Release 14SU4 at http://www.cisco.com/c/en/us/support/unified-communications/unity-connection/products-release-notes-list.html.

Downloading Cisco Unity Connection Release 14 Service Update 4 Software

Procedure

Step 1

Sign in to a computer with a high-speed Internet Unity Connection, and go to the Voice and Unified Communications Downloads page at http://www.cisco.com/cisco/software/navigator.html?mdfid=280082558.

Note

 
To access the software download page, you must be signed in to Cisco.com as a registered user.

Step 2

In the tree control on the Downloads page, expand Products> Unified Communications> Unified Communications Applications> Messaging> Unity Connection, and select Unity Connection Version 14.

Step 3

On the Select a Software Type page, select Cisco Unity Connection Updates.

Step 4

On the Select a Release page, select 14 SU4, and the download buttons appear on the right side of the page.

Step 5

Confirm that the computer you are using has sufficient hard-disk space for the downloaded files. (The download descriptions include file sizes.)

Step 6

Select the applicable download, then follow the on-screen prompts to complete the download, making note of the MD5 value.

Restricted version UCSInstall_CUC_14.0.1.14900-36.sgn.iso
Unrestricted version UCSInstall_CUC_UNRST_14.0.1.14900-36.sgn.iso

Note

 

The VOS version for above mentioned ISO is 14.0.1.14901-1.

Step 7

Use a checksum generator to confirm that the MD5 checksum matches the checksum that is listed on Cisco.com. If the values do not match, the downloaded files are damaged.

Caution

 
Do not attempt to use a damaged file to install software, or the results will be unpredictable. If the MD5 values do not match, download the file again until the value for the downloaded file matches the value listed on Cisco.com.

Free checksum tools are available on the Internet, for example, the Microsoft File Checksum Integrity Verifier utility. The utility is described in Microsoft Knowledge Base article 841290, Availability and Description of the File Checksum Integrity Verifier Utility. The KB article also includes a link for downloading the utility.

Step 8

If you are installing from a DVD, burn the DVD, noting the following considerations:

  • Choose the option to burn a disc image, not the option to copy files. Burning a disc image will extract the thousands of files from the .iso file and write them to a DVD, which is necessary for the files to be accessible for the installation.

  • Use the Joliet file system, which accommodates filenames up to 64 characters long.
  • If the disc-burning application that you are using includes an option to verify the contents of the burned disc, choose that option. This causes the application to compare the contents of the burned disc with the source files.

Step 9

Confirm that the DVD contains a large number of directories and files.

Step 10

Delete unnecessary files from the hard disk to free disk space, including the .iso file that you downloaded.


Reverting to the Unity Connection Version on the Inactive Partition

See the “Rollback of Unity Connection” section of the “Upgrading Cisco Unity Connection” chapter of the Install, Upgrade, and Maintenance Guide for Cisco Unity Connection Release 14 at https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/14/install_upgrade/guide/b_14cuciumg/b_14cuciumg_chapter_010.html.

If a Unity Connection cluster is configured, revert to the previous version on the publisher server first, then on the subscriber server.

Caveat Information

You can find the latest caveat information for Unity Connection version 14SU4 by using Bug Toolkit, an Online tool available for customers to query defects according to their own needs.

Bug Toolkit is available at https://bst.cloudapps.cisco.com/bugsearch/. Fill in your query parameters by using the custom settings in the Advanced Settings option.


Note


To access Bug Toolkit, you must be logged on to Cisco.com as a registered user.

This section contains the following caveat information:

Open Caveats—Unity Connection Release 14SU4

Click a link in the Caveat Number column to view the latest information on the caveat in Bug Toolkit. (Caveats are listed in order by severity, then by component, then by caveat number.)

Table 1. Unity Connection Release 14SU4 Open Caveats
Caveat Number Component Severity Description
CSCwk634941

core

3

Evaluation of Cisco Unity Connection for Open SSH regression vulnerability

CSCwk75669 messaging 3

"Connection Google Workspace Sync Service" (CuGSuiteSy+) is using high CPU than expected

CSCwk63447

setup

3

CUC Dataexport fails on Blue Screen stuck indefinitely when exporting data from 11.5 to 15

1

Note : The COP file is available for this defect fix in 14SU4 at Software Download - Cisco Systems.

ReadMe: ciscocm.V14_CVE-2024-6387_v1.1.cop-Readme.pdf

Resolved Caveats—Unity Connection Release 14 SU4

Click a link in the Caveat Number column to view the latest information on the caveat in Bug Toolkit. (Caveats are listed in order by severity, then by component, then by caveat number.)

Table 2. Unity Connection Release 14 SU4 Resolved Caveats
Caveat Number Component Severity Description
CSCwh14380

inbox

2

Cisco Unity Connection Unauthenticated Arbitrary File Upload Vulnerability.

CSCwi99392

admin

3

UC15 Internal Error while Saving AXL Page

CSCwh78412

core

3

Legacy secure call not working in "Authenticated" mode

CSCwj56788

database

3

Tomcat REST actions do not get updated to tbl_messageactivity in UnityRptDB

CSCwf98820

database

3

Sysadmin database failing to move to sadmin dbspace

CSCwi58750

inbox

3

Unity Connection Encounters Null Pointer Exception on Web Inbox Redirection

CSCwf70241

messaging

3

Google Workspace Sync not functioning correctly in case invalid/stale history id in CUC DB

CSCwf83827

setup

3

Certificate Unknown Error is from Unity side, after upgrading from 14 FCS to 14SU3

Related Caveats—Cisco Unified Communications Manager 14SU4 Components that are Used by Unity Connection 14SU4

Table 3 below describes the Cisco Unified Communications Manager components that are used by Cisco Unity Connection.

Caveat information for the Cisco Unified CM components is available in the following documents:

Table 3. Cisco Unified CM 14SU4 Components that are used by Unity Connection 14SU4
Cisco Unified CM Component Description
backup-restore Backup and restore utilities
ccm-serviceability ccm-serviceability Cisco Unified Serviceability web interface
cdp Cisco Discovery Protocol Drivers
cli Command-line interface (CLI)
cmui Certain elements in the Unity Connection web interfaces (such as search tables and splash screens)
cpi-afg Cisco Unified Communications Answer File Generator
cpi-appinstall Installation and upgrades
cpi-cert-mgmt Certificate management
cpi-diagnose Automated diagnostics system
cpi-os Cisco Unified Communications Operating System
cpi-platform-api Abstraction layer between the Cisco Unified Communications Operating System and the applications hosted on the platform
cpi-security Security for connections to the server
cpi-service-mgr Service Manager (ServM)
cpi-vendor External vendor issues
cuc-tomcat Apache Tomcat and third-party software
database Installation and access to the configuration database (IDS)
database-ids IDS database patches
ims Identity Management System (IMS)
rtmt Real-Time Monitoring Tool (RTMT)

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

Further information regarding U.S. export regulations may be found at

https://research.ucdavis.edu/wp-content/uploads/Export-Control-Overview-of-Regulations.pdf