The Cisco Catalyst IR1101 Rugged Series Router is a next-generation modular industrial router, which has a base platform with additional pluggable modules that can be added. The pluggable modules provide the flexibility of adding different interfaces to the IR1101 platform, for example, a cellular module, which provides 5G and Fourth-Generation Long-Term Evolution (4G LTE) cellular networks.

The IR1101 also has expansion modules that adds key capabilities to the IR1101. The expansion modules are:

The Cisco Catalyst IR1800 Rugged Series Router is a modular industrial router. The IR1800 series has four base platforms with additional pluggable modules that can be added. The pluggable modules provide the flexibility of adding different interfaces to the base platform.

The IR1800 series consists of four base platforms:

• IR1821

• IR1831

• IR1833

• IR1835

The IR1800 series features a base platform with modularity, that includes:

The Cisco Catalyst IR8140 Heavy Duty Series Router (IR8140H), is a next-generation modular IP 67 Industrial Router for outdoor use.

These are the two IR8140H models:

• IR8140H-P-K9 (with PoE PSE)

• IR8140H-K9 (without PoE PSE)

The IR8140H series features contains four external module slots plus two onboard WAN ports, and supports the following:

• 60-W PSU

• CPU 1.2 GHz

• 8GB RAM

• 8GB Flash Storage

• GPS onboard receiver

• 900-MHz WPAN – OFDM/FSK Module

• 4G/LTE and 5G IRMH modules

• mSATA module

• 1x 1-Gigabit Ethernet SFP WAN

• 1x 1-Gigabit Ethernet Cu WAN

• PoE (15 W) supported only in the IR8140H-P-K9 PID

• 12VDC_OUT port (only available when PoE is not in use)

• Battery Backup Units (BBUs): Up to three

• 2x Alarm ports (Digital I/O)

The Cisco Catalyst IR8340 Rugged Series Router, is the first all-in-one industrial-grade, integrated routing, switching, and security platform.

The IR8340 router features two Pluggable Interface Module (PIM) slots, two single-wide IRM-NIM slots, plus 12 onboard LAN ports, and two WAN ports, and supports the following:

• 150W or 250W PSU, low-voltage DC and high-voltage AC/DC options

• PTP on LAN ports - Default, power and Dot1as profiles

• 5G and 4G LTE PIM

• T1/E1 Network Interface Modules (NIM)

• 8-port Asynchronous/Synchronous Network Interface Module (NIM) IRM-NIM-RS232

• mSATA module

• 2 x 1-G Combo WAN ports

• 4 x 1-G Copper LAN ports

• 4 x 1-G Combo LAN ports

• 4 x 1-G SFP LAN ports

• PoE PoE+ UPoE (up to 60 W) support on LAN ports 1-4

• 2 x IN and 1 x OUT Alarm ports (RJ45)

Note	You must have a Cisco.com account to download the software.

Cisco IOS XE Release 17.9.5 includes the following Cisco images.

The latest software downloads for the routers can be found at:

https://software.cisco.com/download/home/286323433

Click the link corresponding to your device to take you to the specific software you are looking for.

The following sections describe the major enhancements available in Cisco IOS XE 17.9.5 on each of the routers.

Note	There are no new features for this software release.

Caveats describe unexpected behavior in Cisco IOS XE releases. Caveats listed as open in a prior release are carried forward to the next release as either open or resolved.

The Cisco Bug Search Tool (BST) is a gateway to the Cisco bug-tracking system, which maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. The BST provides you with detailed defect information about your products and software.