Cross-Platform Release Notes for Cisco IOS Release 12.2SB
Available Languages
Table Of Contents
Cross-Platform Release Notes for Cisco IOS Release 12.2SB
Supported Port Adapters for the Cisco 7200 Series, Cisco 7301, and Cisco 7304
Supported Line Cards for the Cisco 10000 Series Routers
Determining the Software Version
Upgrading to a New Software Release
Bundled FPGAs for the Cisco 7304
Shared Port Adapter FPD Image Packages for the Cisco 7304
Determining the Software Images (Feature Sets) That Support a Specific Feature
Determining the Features Supported in a Specific Software Image (Feature Set)
New Hardware Features in Cisco IOS Release 12.2(33)SB8
New Software Features in Cisco IOS Release 12.2(33)SB8
New Hardware Features in Cisco IOS Release 12.2(33)SB7
New Software Features in Cisco IOS Release 12.2(33)SB7
New Hardware Features in Cisco IOS Release 12.2(33)SB3
New Software Features in Cisco IOS Release 12.2(33)SB3
New Hardware Features in Cisco IOS Release 12.2(33)SB2
8-Port Gigabit Ethernet SPA V2
New Software Features in Cisco IOS Release 12.2(33)SB2
IPv6 VPN over MPLS (6VPE) Inter-AS Options on the Cisco 10000 Series Router
L2TP Forwarding of PPPoE Tagging Information Scalability on the Cisco 10000 Series Router
MLP at LNS with HQoS and ATM Overhead Accounting
New Hardware Features in Cisco IOS Release 12.2(33)SB
1-Port 10 Gigabit Ethernet Shared Port Adapter, LANPHY XFP Optics
2-Port Gigabit Ethernet Shared Port Adapter
5-Port Gigabit Ethernet Shared Port Adapter
Cisco 10000 Series Performance Routing Engine 4
Cisco 10000 Series SPA Interface Processor-600
New Software Features in Cisco IOS Release 12.2(33)SB
1-Port 10 Gigabit Ethernet Shared Port Adapter, LANPHY XFP Optics
Alarm Filtering Support in the Cisco Entity Alarm MIB
Any Transport over MPLS (AToM): Remote Ethernet Port Shutdown
Any Transport over MPLS (AToM): Tunnel Selection
AToM Class-Based Match Frame Relay DE
AToM Set FR DE as Police Action
BFD—WAN Interface Support (ATM, FR, POS, and Serial)
Bidirectional Forwarding Detection (BFD) Standard Implementation
Cisco Express Forwarding—SNMP CEF-MIB Support
CNS Config Retrieve Enhancement with Retry and Interval
Command Scheduler (Kron) Policy for System Startup
Config Change Tracking Identifier
Configuration Change Notification and Logging
Configuration Generation Performance Enhancement
Configuration Replace and Configuration Rollback
Configuration Rollback Confirmed Change
Contextual Configuration Diff Utility
Control Plane Policing—Platform Improvement
DHCPv6—Relay—Reload Persistent Interface ID Option
Embedded Event Manager (EEM) 2.3
Embedded Resource Manager (ERM)
Embedded Resource Manager (ERM)—MIB
Exclusive Configuration Change Access and Access Session Locking
HTTP TACAC+ Accounting Support
HTTPS—HTTP Server and Client with SSL 3.0
IEEE 802.1Q and QinQ Support on GEC
IEEE 802.1Q Tunneling (QinQ) for AToM
Interfaces MIB: SNMP Context Based Access
IP SLAs—LSP Health Monitor with LSP Discovery
IP SLAs for MPLS Pseudo Wire (PWE3) via VCCV
IPv6—IP SLAs (UDP Jitter, UDP Echo, ICMP Echo, TCP Connect)
IPv6 Default Router Preferences
Intelligent Service Gateway (ISG) Features
IS-IS Support for BFD over IPv4
ISSU Support for 2 Port GE SPA V2 with 2 RJ45 Ports
ISSU Support for 5 Port GE SPA V2
L2TP Forwarding of PPPoE Tag Information
L2VPN Interworking: Ethernet VLAN to ATM AAL5
L2VPN Interworking: Ethernet/VLAN to Frame Relay
L2VPN Local Switching—HDLC/PPP
Logging to Local Nonvolatile Storage (ATA Disk)
MQC—Traffic Shaping Overhead Accounting for ATM
Netconf Access for Configuration over BEEP
NSF/SSO—Any Transport over MPLS (AToM)
OSPF Support for BFD over IPv4
OSPFv3 Fast Convergence—LSA and SPF Throttling
Periodic MIB Data Collection and Transfer Mechanism
PPPoE over VLANs Scaling and PPPoE over VLANs Forwarding over PVC
PPPoE—Session Limit Local Override
PPPoEoE—Support for GEC Bundle
PPPoEoQinQ—Support for GEC Bundle
PPPoVLAN—Support for GEC Bundle
QoS: Per-Session Shaping for ATM Interfaces
QoS—Service Policies on Aggregate GEC
QoS—Set ATM CLP Bit Using Policer
QoS: Set L2 CoS as a Policer Action
QoS: Simultaneous Policy Map on Interface and PPP Session
QoS: Tunnel Marking for GRE Tunnels
Reliable Delivery and Filtering for Syslog
RFC 3020 Multilink Frame Relay MIB Support
Role-Based Access Control CLI Commands
SNMPv3—3DES and AES Encryption Support
System Logging—EAL4 Certification Enhancements
Throttling of AAA (RADIUS) Records
Unicast Reverse Path Forwarding (uRPF)
New Hardware Features in Cisco IOS Release 12.2(31)SB12
New Software Features in Cisco IOS Release 12.2(31)SB12
New Hardware Features in Cisco IOS Release 12.2(31)SB10
New Software Features in Cisco IOS Release 12.2(31)SB10
ATM OAM Loopback Mode Detection
New Hardware Features in Cisco IOS Release 12.2(31)SB6
1000BASE-T SFP Pluggable Transceiver
New Software Features in Cisco IOS Release 12.2(31)SB6
PPP Session Queuing on ATM Virtual Circuits
QoS: Per-Session Shaping and Queuing on LNS
New Hardware Features in Cisco IOS Release 12.2(31)SB5
New Software Features in Cisco IOS Release 12.2(31)SB5
Generic Routing Encapsulation Tunnel IP Source and Destination VRF Membership
New Hardware Features in Cisco IOS Release 12.2(31)SB3
New Software Features in Cisco IOS Release 12.2(31)SB3
Embedded Event Manager (EEM) 2.2
QoS: MQC Classification, Policing, and Marking on LAC
New Hardware Features in Cisco IOS Release 12.2(31)SB2
1-Port Enhanced ATM Port Adapter with Support for 8000 VCs
1-Port Packet over SONET OC3c/STM1 Port Adapter
Network Services Engine 150 (NSE-150)
NPE-G2 Network Processing Engine
Performance Routing Engine 3 (PRE-3)
Port Adapter Jacket Card for Cisco 7200VXR Series (C7200-JC-PA)
New Software Features in Cisco IOS Release 12.2(31)SB2
802.1p COS Bit Set for PPP and PPPoE Control Frames
AAA High Availability Support for Local PPPoX Sessions
Calling Station ID Attribute 31
Cisco Express Forwarding - SNMP CEF-MIB Support
Class Based Ethernet CoS Matching & Marking (802.1p & ISL CoS)
Configuration Replace and Configuration Rollback
Control Plane Policing—Time Based
DHCP Relay Option 82 per Interface Support
Dynamic Bandwidth Selection—ATM VC Weights Attribute Specification
Fast EtherChannel and Gigabit EtherChannel Features
Field-Programmable Device Upgrades
Frame Relay - Multilink (MLFR-FRF.16)
HTTP 1.1 Web Server and Client
ICMP Unreachable Rate Limiting User Feedback
IEEE 802.3ad, Link Aggregation Control Protocol
In-Service Software Upgrade Features
Intelligent Service Gateway Features
IPv6 Hardware: PxF Accelerated for IPv6 over MPLS (6PE)
L2VPN Interworking: Ethernet to VLAN Interworking
Layer 2 Tunnel Protocol Features
Multiclass Multilink PPP Enhancement
NAS-Port ID Format C Enhancement
NAT - Integration with MPLS VPNs
Per-VRF Assignment of BGP Router ID
PPP-Max-Payload and IWF PPPoE Tag Support
PXF-Based Frame Relay DE Bit Marking
Rate-Based Satellite Control Protocol (RBSCP)
Routed Bridge Encapsulation with ATM Virtual Circuit Bundles
SNMP - Session to Interface Mapping Improvements
Transmission Control Protocol Features
Turbo ACL Scalability Enhancements (Phase II)
VRF-Aware System Message Logging (Syslog)
Weighted Random Early Detection Improvements
New Hardware Features in Cisco IOS Release 12.2(28)SB6
1-Port Packet over SONET OC3c/STM1 Port Adapter
New Software Features in Cisco IOS Release 12.2(28)SB6
Service Independent Intercept Architecture: SNMP-Based Lawful Intercept
New Hardware Features in Cisco IOS Release 12.2(28)SB2
CWDM SFP for the 1-Port Gigabit Ethernet Half-Height Line Card
New Software Features in Cisco IOS Release 12.2(28)SB2
BGP Support for NonStop Routing (NSR) with Stateful Switchover (SSO)
MPLS Traffic Engineering Features
MPLS VPN Half-Duplex VRF with Dynamic and Static PE-CE Routing
RSVP Refresh Reduction and Reliable Messaging
New Hardware Features in Cisco IOS Release 12.2(28)SB
1-Port Enhanced ATM Port Adapter with Support for 8000 VCs
4-Port Half-Height Channelized T3 Line Card
4-Port OC-3/ATM Long-Reach Line Card
1000BASE-T GBIC Support for the Network Services Engine 100
CWDM GBIC Support for the Network Services Engine 100
CWDM SFP Support for the Network Processing Engine 100
CWDM SFP Support for the 2-Port Gigabit Ethernet SPA on the Cisco 7304 Router
New Software Features in Cisco IOS Release 12.2(28)SB
Any Transport over MPLS (AToM): Frame Relay over MPLS (FRoMPLS)
Attribute Screening for Access Requests
Autosense of MUX/SNAP Encapsulation and PPPoA/PPPoE on ATM PVCs
Bridged 1483 Encapsulated Traffic over ATM SVCs
Byte-Based Weighted Random Early Detection
CEF/dCEF - Cisco Express Forwarding
Configurable MAC Address for PPPoE
Define Interface Policy-Map AV Pairs AAA
Distributed Time-Based Access Lists
Dynamic ATM VP and VC Configuration Modification
Dynamic Subscriber Bandwidth Selection
EIGRP MPLS VPN PE-CE Site of Origin (SoO)
Enabling OSPFv2 on an Interface Using the ip ospf area Command
Extended NAS-Port-Type and NAS-Port Support
Generic Routing Encapsulation (GRE) Tunnel Keepalive
Globalized Channelizations for SONET/SDH
Improved show commands for MLP-ATM LFI
Intelligent Service Gateway (ISG) Features
Interface Alias Long Name Support
IPv6 Access Services: DHCPv6 Prefix Delegation
IPv6 Features for the Cisco 10000 Series
In Service Software Upgrade (ISSU)
Layer 2 Local Switching: Frame Relay to Frame Relay
Local Template-Based ATM PVC Provisioning
Logging to Local Non-Volatile Storage (ATA Disk)
MLP LFI over ATM Configuration Scaling
MPLS Traffic Engineering Features
MQC Policy Map Support on Configured VC Range
Multilink Frame Relay (FRF.16.1) Variable Bandwidth Class Support
Multiple Action Policer for PXF
Multirouter Automatic Protection Switching (APS)
Nonstop Forwarding and Stateful Switchover Features
Offload Server Accounting Enhancement
Packet Classification Using the Frame Relay DLCI Number
Per-Packet Load Balancing (PPLB)
Per-User QoS via AAA Policy Name
Policer Enhancement: Multiple Actions
PPP MLP MRRU Negotiation Configuration
Pseudowire Emulation Edge-to-Edge MIBs for Ethernet Services
Pseudowire Emulation Edge-to-Edge MIBs for Ethernet and Frame Relay Services
QoS Features for the Cisco 7200 Series and Cisco 7301
QoS Features for the Cisco 10000 Series
Reserve Memory for Console Access
Route Processor Redundancy Plus (RPR+)
RSVP Refresh Reduction and Reliable Messaging
Secure Shell Version 2 Support
Three-level Hierarchical Policy Support in PXF
Turbo Access Control List Scalability Enhancements [Phase 1]
UDI - Unique Device Identifier
UDP Forwarding Support of IP Redundancy Virtual Router Group (VRG)
Using 31-Bit Prefixes on IPv4 Point-to-Point Links
Virtual Template Interfaces Limit Expansion
VLANs over IP Unnumbered Subinterfaces
VPN Routing/Forwarding (VRF) CLI Command
XML Interface to Syslog Messages
Limitations and Restrictions in Cisco IOS Release 12.2(33)SB
New Boot Image Requirements for Cisco IOS Release 12.2(33)SB
Limitations and Restrictions in Cisco IOS Release 12.2(31)SB11
VLAN Mobility Is Not Allowed for ISG Sessions
Limitations and Restrictions in Cisco IOS Release 12.2(31)SB2
NSE-150 USB Ports Not Supported
Limitations and Restrictions in Cisco IOS Release 12.2(28)SB
Event-Timestamp AVP for the Cisco 10000 Series
High Availability Support for the Cisco 10000 Series
ISSU Restriction for the Cisco 10000 Series
Per Precedence WRED Statistics
RADIUS Attribute 31: PPPoX Calling Station ID
Scaling Limits for L2TP Tunnels on the Cisco 10000 Series
SNMP Version 1 BGP4-MIB Limitations
System Limits for Policy Maps on the Cisco 10000 Series
tunnel vrf Command Not Supported on the Cisco 10000 Series
Cisco IOS Release 12.2(31)SB3 Deferred
Important Notes for Cisco IOS Release 12.2(33)SB
ATM Virtual Circuits Changed in Virtual Paths
Mode Change on an 8-Port E3/DS3 ATM Line Card
Important Notes for Cisco IOS Release 12.2(31)SB2
NPE-G2 Support for the show environment Command
Outdated ATA ROM Monitor Library (Monlib) [CSCsg64518]
QoS CLI Migration from PRE-2 to PRE-3
Valid Ranges for MLP Interfaces on the Cisco 10000 Series
Important Notes for Cisco IOS Release 12.2(28)SB
Configuring Multilink Point-to-Point Protocol Connections on the Cisco 10000 Series
Tuning I/O Buffers for Nonstop Forwarding (NSF)/Stateful Switchover (SSO) Functionality
Upgrading PCI Port Adapter Carrier Card ROMmon for the Cisco 7304 Router
Cross-Platform Release Notes for Cisco IOS Release 12.2SB
September 12, 2013
Cisco IOS Release 12.2(33)SB15
OL-9967-04 Rev. A1
These release notes support Cisco IOS Release 12.2SB up to and including Cisco IOS Release 12.2(33)SB15. These release notes are updated as needed to describe new features, memory requirements, hardware support, software platform deferrals, and related documents.
Cisco IOS Release 12.2SB is tailored for service provider networks and large-scale enterprise networks. The main purposes of Release 12.2SB are the following:
•
For the Cisco 10000 series, to introduce greater scalability for Multiprotocol Label Switching (MPLS) provider edge (PE) applications with the introduction of advanced High Availability (HA) capabilities.
•
•
For more information, see the "Introduction" section.
For a list of the software caveats that apply to Cisco IOS Release 12.2SB, see the "Troubleshooting" section, the Caveats for Cisco IOS Release 12.2 document, and the "Caveats" section in the Cross-Platform Release Notes for Cisco IOS Release 12.2S. These documents are updated for every maintenance release and are located on Cisco.com.
Use these release notes with the Cross-Platform Release Notes for Cisco IOS Release 12.2 document and the Cross-Platform Release Notes for Cisco IOS Release 12.2S, both of which are located on Cisco.com.
We recommend that you view the field notices for this release to see if your software or hardware platforms are affected. If you have an account on Cisco.com, you can find field notices at http://www.cisco.com/warp/customer/tech_tips/index/fn.html. If you do not have a Cisco.com login account, you can find field notices at http://www.cisco.com/warp/public/tech_tips/index/fn.html.
Contents
•
•
Introduction
Cisco IOS Release 12.2SB is based on Cisco IOS Release 12.2(25)S and includes many features from Cisco IOS Release 12.2T.
For the Cisco 10000 series, Release 12.2SB supports select features from Release 12.2(25)S that include Multiprotocol Label Switching (MPLS) provider edge (PE) feature parity with Cisco IOS Release 12.0(27)S, along with greater scalability and feature enhancements.
For the Cisco 7200 series and Cisco 7301, all features that are in Release 12.2(25)S are also in Release 12.2SB. (Cisco IOS Release 12.2(33)SB does not support Cisco 7200 series and Cisco 7301 series routers. To upgrade, move to Cisco IOS Release 12.2(33)SRC.)
For the Cisco 7304, all features that are supported in Cisco IOS Release 12.2S, up to and including Release 12.2(25)S3, are also in Release 12.2SB.
Many of the features and the hardware that are supported in this software have been previously released to customers on other software releases.
For information on new features and Cisco IOS commands that are supported by Release 12.2SB, see the "New and Changed Information" section and the "Troubleshooting" section.
Early Deployment Releases
These release notes describe the Cisco 7200 series routers, Cisco 7301 router, Cisco 7304 router, and Cisco 10000 series routers for Cisco IOS Release 12.2SB, which is an early deployment (ED) release based on Cisco IOS Release 12.2 and Release 12.2S. Early deployment releases contain fixes for software caveats and support for new Cisco hardware and software features. Table 1 shows the Cisco IOS Release 12.2SB early deployment releases for the above-mentioned platforms.
Table 1 Early Deployment Releases for the Cisco 7200 Series, Cisco 7301, Cisco 7304, and Cisco 10000 Series
12.2(33)SB11
Rebuild
No new software features.
No new hardware features.
09/28/2011
12.2(33)SB10
Rebuild
No new software features.
No new hardware features.
04/11/2011
12.2(33)SB9
Rebuild
No new software features.
No new hardware features.
10/27/2010
12.2(33)SB8a
Rebuild
No new software features.
No new hardware features.
02/10/2010
12.2(33)SB8
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(33)SB8" section.
No new hardware features.
01/20/2010
12.2(33)SB7
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(33)SB7" section.
No new hardware features.
08/20/2009
12.2(33)SB6
Rebuild
No new software features.
No new hardware features.
07/15/2009
12.2(33)SB5
Rebuild
No new software features.
No new hardware features.
04/08/2009
12.2(33)SB4
Rebuild
No new software features.
No new hardware features.
03/30/2009
12.2(33)SB3
Rebuild
No new software features.
No new hardware features.
01/05/2009
12.2(33)SB2
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(33)SB2" section.
See the "New Hardware Features in Cisco IOS Release 12.2(33)SB2" section.
09/29/2008
12.2(33)SB1
Rebuild
No new software features.
No new hardware features.
07/15/2008
12.2(33)SB1
Maintenance
See the "New Software Features in Cisco IOS Release 12.2(33)SB" section.
See the "New Hardware Features in Cisco IOS Release 12.2(33)SB" section.
04/20/2008
12.2(31)SB21
Rebuild
No new software features.
No new hardware features.
06/10/2011
12.2(31)SB20
Rebuild
No new software features.
No new hardware features.
2/25/2011
12.2(31)SB19
Rebuild
No new software features.
No new hardware features.
09/20/2010
12.2(31)SB18
Rebuild
No new software features.
No new hardware features.
03/31/2010
12.2(31)SB17
Rebuild
No new software features.
No new hardware features.
11/05/2009
12.2(31)SB16
Rebuild
No new software features.
No new hardware features.
07/23/2009
12.2(31)SB15
Rebuild
No new software features.
No new hardware features.
04/03/2009
12.2(31)SB14
Rebuild
No new software features.
No new hardware features.
01/23/2009
12.2(31)SB13
Rebuild
No new software features.
No new hardware features.
08/27/2008
12.2(31)SB12
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(31)SB12" section.
No new hardware features.
06/06/2008
12.2(31)SB11
Rebuild
No new software features.
No new hardware features.
02/11/2008
12.2(31)SB10
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(31)SB10" section.
No new hardware features.
11/20/2007
12.2(31)SB9
Rebuild
No new software features.
No new hardware features.
10/22/2007
12.2(31)SB8
Rebuild
No new software features.
No new hardware features.
09/20/2007
12.2(31)SB7
Rebuild
No new software features.
No new hardware features.
08/23/2007
12.2(31)SB6
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(31)SB6" section.
See the "New Hardware Features in Cisco IOS Release 12.2(31)SB6" section.
07/12/2007
12.2(31)SB52
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(31)SB5" section.
See the "New Hardware Features in Cisco IOS Release 12.2(31)SB5" section.
04/23/2007
12.2(31)SB3x
Rebuild
No new software features.
No new hardware features.
04/13/2007
12.2(31)SB3
Deferred Rebuild
See the "New Software Features in Cisco IOS Release 12.2(31)SB3" section.
No new hardware features.
02/23/2007
12.2(31)SB23
Maintenance
See the "New Software Features in Cisco IOS Release 12.2(31)SB2" section.
See the "New Hardware Features in Cisco IOS Release 12.2(31)SB2" section.
12/04/2006
12.2(28)SB13
Rebuild
No new software features
No new hardware features
01/30/2009
12.2(28)SB12
Rebuild
No new software features
No new hardware features
03/28/2008
12.2(28)SB11
Rebuild
No new software features
No new hardware features
02/06/2008
12.2(28)SB10
Rebuild
No new software features.
No new hardware features.
11/05/2007
12.2(28)SB9
Rebuild
No new software features.
No new hardware features.
08/08/2007
12.2(28)SB8
Rebuild
No new software features.
No new hardware features.
05/25/2007
12.2(28)SB7
Rebuild
No new software features.
No new hardware features.
05/02/2007
12.2(28)SB6
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(28)SB6" section.
See the "New Hardware Features in Cisco IOS Release 12.2(28)SB6" section.
01/12/2007
12.2(28)SB5
Rebuild
No new software features.
No new hardware features.
10/03/2006
12.2(28)SB4
Rebuild
No new software features.
No new hardware features.
08/31/2006
12.2(28)SB3
Rebuild
No new software features.
No new hardware features.
07/24/2006
12.2(28)SB2
Rebuild
See the "New Software Features in Cisco IOS Release 12.2(28)SB2" section.
See the New Hardware Features in Cisco IOS Release 12.2(28)SB2.
06/19/2006
12.2(28)SB1
Rebuild
No new software features.
No new hardware features.
05/11/2006
12.2(28)SB
Maintenance
See the "New Software Features in Cisco IOS Release 12.2(28)SB" section.
See the"New Hardware Features in Cisco IOS Release 12.2(28)SB" section.
03/20/2006
1 Cisco IOS Release 12.2(33)SB does not support Cisco 7200 series and Cisco 7301 series routers. To upgrade, move to Cisco IOS Release 12.2(33)SRC.
2 Cisco IOS Release 12.2(31)SB4 is not publicly available.
3 Cisco IOS Release 12.2(31)SB and Release 12.2(31)SB1 are not publicly available.
System Requirements
This section describes the system requirements for Cisco IOS Release 12.2SB and includes the following sections:
•
•
Supported Hardware
This section describes the platforms, port adapters, and line cards that are supported in Cisco IOS Release 12.2SB and consists of the following subsections:
•
•
Supported Platforms
Cisco IOS Release 12.2SB supports the following platforms:
•
•
•
•
For detailed descriptions of the new hardware features, see the "New and Changed Information" section.
Table 2 describes the supported platforms for Cisco IOS Release 12.2SB and uses the following conventions:
•
•
Table 2 Supported Platforms for Cisco IOS Release 12.2SB
12.2(33)SB11
No
No
Yes
Yes
12.2(33)SB10
No
No
Yes
Yes
12.2(33)SB9
No
No
Yes
Yes
12.2(33)SB8a
No
No
Yes
Yes
12.2(33)SB8
No
No
Yes
Yes
12.2(33)SB7
No
No
Yes
Yes
12.2(33)SB6
No
No
Yes
Yes
12.2(33)SB5
No
No
Yes
Yes
12.2(33)SB4
No
No
Yes
Yes
12.2(33)SB3
No
No
Yes
Yes
12.2(33)SB2
No
No
Yes
Yes
12.2(33)SB1
No
No
Yes
Yes
12.2(33)SB2
No
No
Yes
Yes
12.2(31)SB21
Yes
Yes
Yes
Yes
12.2(31)SB20
Yes
Yes
Yes
Yes
12.2(31)SB19
Yes
Yes
Yes
Yes
12.2(31)SB18
Yes
Yes
Yes
Yes
12.2(31)SB17
Yes
Yes
Yes
Yes
12.2(31)SB16
Yes
Yes
Yes
Yes
12.2(31)SB15
Yes
Yes
Yes
Yes
12.2(31)SB14
Yes
Yes
Yes
Yes
12.2(31)SB13
Yes
Yes
Yes
Yes
12.2(31)SB12
Yes
Yes
Yes
Yes
12.2(31)SB11
Yes
Yes
Yes
Yes
12.2(31)SB10
Yes
Yes
Yes
Yes
12.2(31)SB9
Yes
Yes
Yes
Yes
12.2(31)SB8
Yes
Yes
Yes
Yes
12.2(31)SB7
Yes
Yes
Yes
Yes
12.2(31)SB6
Yes
Yes
Yes
Yes
12.2(31)SB53
Yes
Yes
Yes
Yes
12.2(31)SB3x
Yes
Yes
Yes
Yes
12.2(31)SB3
Yes
Yes
Yes
Yes
12.2(31)SB24
Yes
Yes
Yes
Yes
12.2(28)SB13
Yes
Yes
Yes
Yes
12.2(28)SB12
Yes
Yes
Yes
Yes
12.2(28)SB11
Yes
Yes
Yes
Yes
12.2(28)SB10
Yes
Yes
Yes
Yes
12.2(28)SB9
Yes
Yes
Yes
Yes
12.2(28)SB8
Yes
Yes
Yes
Yes
12.2(28)SB7
Yes
Yes
Yes
Yes
12.2(28)SB6
Yes
Yes
Yes
Yes
12.2(28)SB5
Yes
Yes
Yes
Yes
12.2(28)SB4
Yes
Yes
Yes
Yes
12.2(28)SB3
Yes
Yes
Yes
Yes
12.2(28)SB2
Yes
Yes
Yes
Yes
12.2(28)SB1
No
No
Yes
No
12.2(28)SB
Yes
Yes
Yes
Yes
1 The Cisco 7201 is introduced in Cisco IOS Release 12.2(31)SB5.
2 Cisco IOS Release 12.2(33)SB does not support Cisco 7200 series and Cisco 7301 series routers. To upgrade, move to Cisco IOS Release 12.2(33)SRC.
3 Cisco IOS Release 12.2(31)SB4 is not publicly available.
4 Cisco IOS Release 12.2(31)SB and Release 12.2(31)SB1 are not publicly available.
Supported Port Adapters for the Cisco 7200 Series, Cisco 7301, and Cisco 7304
Table 3 lists the port adapters that are supported for the Cisco 7200 series routers, and Cisco 7301 router in Cisco IOS Release 12.2SB and uses the following conventions:
•
•
•
Table 3 Supported Port Adapters for the Cisco 7200 Series, Cisco 7301, and Cisco 7304
Product Number 1
Router
RouterPA-A3-OC3MM
1-port ATM Enhanced OC3c/STM1 multimode
—
Yes
Yes
Yes
Yes
PA-A3-OC3SMI
1-port ATM Enhanced OC3c/STM1 single mode (IR)
—
Yes
Yes
Yes
Yes
PA-A3-OC3SML
1-port ATM Enhanced OC3c/STM1 single mode (LR)
—
No
Yes
Yes
Yes
PA-A3-OC12MM
1-port ATM Enhanced OC12/STM4 multimode
—
No
No
No
No
PA-A3-OC12SMI
1-port ATM Enhanced OC12/STM4 single mode (IR)
—
No
No
No
No
PA-A3-E3
1-port ATM Enhanced E3
—
No
Yes
Yes
Yes
PA-A3-T3
1-port ATM Enhanced DS3
—
Yes
Yes
Yes
Yes
PA-A3-8E1IMA
8-port ATM Inverse Mux E1, 120 ohms
—
Yes
Yes
Yes
Yes
PA-A3-8T1IMA
8-port ATM Inverse Mux T1
—
Yes
Yes
Yes
Yes
PA-A6-OC3MM
1-port ATM OC-3c/STM-1 multimode, enhanced
12.2(28)SB
Yes
Yes
Yes
Yes2
PA-A6-OC3SMI
1-port ATM OC-3c/STM-1 single-mode (IR), enhanced
12.2(28)SB
Yes
Yes
Yes
Yes2
PA-A6-OC3SML
1-port ATM OC-3c/STM-1 single-mode (LR), enhanced
12.2(28)SB
Yes
Yes
Yes
Yes2
PA-A6-T3
1-port ATM DS3, enhanced
12.2(28)SB
Yes
Yes
Yes
Yes2
PA-A6-E3
1-port ATM E3, enhanced
12.2(28)SB
Yes
Yes
Yes
Yes2
PA-4E
4-port Ethernet 10BASE-T
—
No
Yes
Yes
Yes
PA-4E1G/75
4-port E1 G.703 Serial, 75 ohms/unbalanced
—
Yes
Yes
Yes
Yes
PA-4E1G/120
4-port E1 G.703 Serial, 120 ohms/balanced
—
Yes
Yes
Yes
Yes
PA-8E
8-port Ethernet 10BASE-T
—
Yes
Yes
Yes
Yes
PA-2FE-FX
2-port Fast Ethernet 100BASE-FX
—
Yes
Yes
Yes
Yes
PA-2FE-TX
2-port Fast Ethernet 100BASE-TX
—
Yes
Yes
Yes
Yes
PA-GE
1-port Gigabit Ethernet
—
Yes
Yes
No
Yes
PA-H
1-port High-Speed Serial Interface (HSSI)
—
Yes
Yes
Yes
Yes
PA-2H
2-port High-Speed Serial Interface (HSSI)
—
No
Yes
Yes
Yes
PA-MC-T3
1-port multichannel T3
—
Yes
Yes
Yes
Yes
PA-MC-E3
1-port multichannel E3
—
Yes
Yes
Yes
Yes
PA-MC-2T3+
2-port multichannel T3
—
No
Yes
Yes
Yes
PA-MC-2T1
2-port multichannel T1, integrated CSU/DSUs
—
Yes
Yes
Yes
Yes
PA-MC-2E1/120
2-port multichannel E1, G.703 120-ohm interface
—
Yes
Yes
Yes
Yes
PA-MC-4T1
4-port multichannel T1, integrated CSU/DSUs
—
Yes
Yes
Yes
Yes
PA-MC-8TE1+
8-port multichannel T1/E1 8PRI
—
Yes
Yes
Yes
Yes
PA-MC-STM-1MM
1-port multichannel STM-1 multimode
—
Yes
Yes
Yes
Yes
PA-MC-STM-1SMI
1-port multichannel STM-1 single mode
—
Yes
Yes
Yes
Yes
PA-4B-U
4-port BRI, U Interface
—
No
Yes
Yes
No
PA-8B-S/T
8-port BRI, S/T Interface
—
No
Yes
Yes
No
SPA-4FE-7304
4-port 10/100 Fast Ethernet SPA
—
No
No
No
Yes
SPA-2GE-7304
2-port 10/100/1000 Gigabit Ethernet SPA
—
No
No
No
Yes
SPA-2XOC3-POS
2-port OC-3c/STM-1 POS SPA
—
No
No
No
Yes
SPA-4XOC3-POS
4-port OC-3c/STM-1 POS SPA
—
No
No
No
Yes
SPA-1OC12-POS
1-port OC-12c/STM-4 POS SPA
—
No
No
No
Yes
SPA-2XT3/E3
2-port T3/E3 Serial SPA
—
No
No
No
Yes
SPA-4XT3/E3
4-port T3/E3 Serial SPA
—
No
No
No
Yes
PA-POS-OC3MM
1-port Packet over SONET OC3c/STM1 multimode
—
No
Yes
Yes
Yes
PA-POS-OC3SMI
1-port Packet over SONET OC3c/STM1 single mode (IR)
—
No
Yes
Yes
Yes
PA-POS-OC3SML
1-port Packet over SONET OC3c/STM1 single mode (LR)
—
No
Yes
Yes
Yes
PA-POS-1OC3
1-port OC-3/STM-1 POS (with APS)
12.2(28)SB6
Yes
Yes
Yes
Yes3
PA-POS-2OC3
2-port OC-3/STM-1 POS (with APS)
—
Yes
Yes
Yes
Yes
PA-4T+
4-port Serial, Enhanced
—
Yes
Yes
Yes
Yes
PA-8T-V35
8-port Serial, V.35
—
No
Yes
Yes
Yes
PA-8T-X21
8-port Serial, X.21
—
No
Yes
Yes
Yes
PA-8T-232
8-port Serial, 232
—
No
Yes
Yes
Yes
PA-T3+
1-port T3 Serial, Enhanced
—
Yes
Yes
Yes
Yes
PA-2T3+
2-port T3 Serial, Enhanced
—
Yes
Yes
Yes
Yes
PA-E3
1-port E3 Serial, E3 DSUs
—
Yes
Yes
Yes
Yes
PA-2E3
2-port E3 Serial, E3 DSUs
—
Yes
Yes
Yes
Yes
1 For a spare product number, append an equal sign (=) to the product number. For a spare product number, append an equal sign (=) to the product number. If a product number is listed as a spare product in the table, that is, with an equal sign (=), it means that the product is only available as a spare product. For End-of-Sale (EOS) and End-of-Life (EOL) information about port adapters, refer to the Cisco product bulletins at the following locations:
Cisco 7200 series: http://www.cisco.com/en/US/products/hw/routers/ps341/prod_eol_notices_list.html
Cisco 7300 series: http://www.cisco.com/en/US/products/hw/routers/ps352/prod_eol_notices_list.html
Cisco 7400 series: http://www.cisco.com/en/US/products/hw/routers/ps354/prod_eol_notices_list.html2 Support on the Cisco 7304 was added in both Cisco IOS Release 12.2(28)SB6 and Release 12.2(31)SB2.
3 Support on the Cisco 7200 series and Cisco 7301 was added in Cisco IOS Release 12.2(28)SB6; support on the Cisco 7304 was added in Release 12.2(31)SB2.
For information about troubleshooting port adapters and about alerts, see the Cisco documents at the following location:
http://www.cisco.com/en/US/products/hw/modules/ps2033/
tsd_products_support_troubleshoot_and_alerts.htmlSupported Line Cards for the Cisco 10000 Series Routers
Table 4 lists the line cards that are supported for the Cisco 10000 series routers in Cisco IOS Release 12.2(28)SB and later releases. The number in the "In" column indicates the Cisco IOS 12.2SB release in which the line card was introduced. For example, (28) means that a line card was introduced in Cisco IOS Release 12.2(28)SB. If a cell in this column contains an em dash (—), support for the line card was inherited from other releases and was included in Cisco IOS Release 12.2(28)SB.
Table 4 Supported Line Cards for the Cisco 10000 Series Router
1-Port OC-12 ATM
ESR-1OC-12-ATM2
1-port OC-12 ATM
—
4-Port OC-3 ATM
ESR-4OC3-ATM-SM
4-port OC-3/STM-1 ATM, single mode
—
4-Port OC-3 ATM LR
ESR-4OC3-ATM-SM-LR
4-port OC-3/STM-1 ATM, long reach
(28)
8-Port E3/DS3 ATM
ESR-8E3/DS3-ATM
8-port E3/DS3 ATM
—
1-Port Channelized OC-12/STM-4
ESR-1COC-12/STM-4-
SMI31-port channelized OC-12/STM-4 (STS-12),
single mode, intermediate reach—
ESR-1COC-12/STM-4-
SML1-port channelized OC-12/STM-4 (STS-12),
single mode, long reach—
4-Port Channelized
STM-1/OC-3ESR-4OC3-ChSTM-1
/OC-34-port channelized OC-3/STM-1 SDH,
single mode—
4-Port Channelized T3 Half-Height
ESR-HH-4CT3
4-port channelized T3 half-height
(28)
6-Port Channelized T3
ESR-6CT3
6-port channelized T3
—
24-Port T1/E1
ESR-24CT1/E1
24-port channelized E1/T1
—
8-Port Unchannelized
E3/T3ESR-8E3/DS3
8-port clear channel E3/DS3 line card
—
1-Port GE
ESR-1GE
1-port Gigabit Ethernet
—
1-Port GE Half-Height
ESR-HH-1GE
1-port Gigabit Ethernet half-height
—
8-Port FE Half-Height
ESR-HH-8FE-TX
8-port Fast Ethernet half-height
—
Half-Height Carrier
ESR-HH-CARRIER
Full-length base carrier for half-height
line card—
1-Port OC-12/STM-4
POSESR-1OC-12/P-SMI
1-port OC-12/STS-12c/STM-4 POS/SDH,
single mode, intermediate reach—
ESR-1OC-12/P-SML
1-port OC-12/STS-12c/STM-4 POS,
single mode, long reach—
1-port OC-48/STM-16
POSESR1OC48/P/SRPSMS
1-port OC-48/STM-16 POS/SRP,
single mode, short reach—
ESR1OC48/P/SRPSML
1-port OC-48/STM-16 POS/SRP,
single mode, long reach—
6-Port OC-3c/STM-1
POSESR-6OC3/P-SMI
6-port OC-3c/STS-3c/STM-1 POS/SDH,
single mode, intermediate reach—
ESR-6OC3/P-SML
6-port OC-3c/STS-3c/STM-1 POS/SDH,
single mode, long reach—
1 For a spare product number, append an equal sign (=) to the product number. If a product number is listed as a spare product in the table, that is, with an equal sign (=), it means that the product is only available as a spare product. For End-of-Sale (EOS) and End-of-Life (EOL) information about line cards, refer to the Cisco product bulletins at the following location:
http://www.cisco.com/en/US/products/hw/routers/ps133/prod_eol_notices_list.html2 The old part number for this line card is ESR-1OC12ATM-SM.
3 The old part number for this line card is ESR-1COC12-SMI.
For information about troubleshooting line cards and about alerts, see the Cisco documents at the following location:
http://www.cisco.com/en/US/products/hw/routers/ps133/
tsd_products_support_troubleshoot_and_alerts.htmlDetermining the Software Version
To determine the version of Cisco IOS software that is running on your Cisco router, log in to the router and enter the show version EXEC command:
Router#> show versionCisco Internetwork Operating System SoftwareIOS (tm) 7200 Software (rsp-jsv-mz), Version 12.2(31)SB6, EARLY DEPLOYMENT RELEASE SOFTWAREUpgrading to a New Software Release
For information about selecting a new Cisco IOS software release, see How to Choose a Cisco IOS Software Release at the following location:
http://www.cisco.com/warp/public/130/choosing_ios.shtml
For information about upgrading the Cisco 7200 series routers, Cisco 7301 router, Cisco 7304 router and Cisco 10000 series routers, see the document at the following location:
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094c07.shtml
In addition, for the Cisco 10000 series, see the Upgrading to Cisco IOS Release 12.2(28)SB on a Cisco 10000 Series Router document at the following location:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/upgrade/upgdsb.htm
For Cisco IOS upgrade ordering instructions, see the document at the following location:
http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/957_pp.htm
To choose a new Cisco IOS software release by comparing feature support or memory requirements, use Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS and Catalyst OS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). Under the release section, you can compare Cisco IOS software releases side by side to display both the features unique to each software release and the features that the releases have in common.
Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:
To choose a new Cisco IOS software release based on information about defects that affect that software, use Bug Toolkit at the following URL:
http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl
Microcode Software
This section describes microcode software that is supported for the Cisco 7304 in Cisco IOS Release 12.2S and consists of the following subsections:
•
•
Bundled FPGAs for the Cisco 7304
This section provides information about the field-programmable gate array (FPGA) images for the Cisco 7304. These images apply only to the Cisco 7304.
If the versions of the FPGA images that are running on your Cisco 7304 do not match the versions that are bundled in the Cisco IOS software, we recommend that you update your FPGA images. For more details, see the Cisco 7304 FPGA Bundling and Update document:
http://www.cisco.com/en/US/docs/ios/12_1/12_1ex/feature/guide/73fpga.html
Bundled FPGAs for Cisco IOS Release 12.2(33)SB10
The MSC-100 FPGA bundle has changed from 0.27 to 0.29 for Cisco IOS Release 12.2(33)SB10. All Cisco IOS Release 12.2(33)SB10 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB9
There are no new FPGA images for Cisco IOS Release 12.2(33)SB9. All Cisco IOS Release 12.2(33)SB9 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB8
There are no new FPGA images for Cisco IOS Release 12.2(33)SB8. All Cisco IOS Release 12.2(33)SB8 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB7
There are no new FPGA images for Cisco IOS Release 12.2(33)SB7. All Cisco IOS Release 12.2(33)SB7 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB6
There are no new FPGA images for Cisco IOS Release 12.2(33)SB6. All Cisco IOS Release 12.2(33)SB6 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB5
There are no new FPGA images for Cisco IOS Release 12.2(33)SB5. All Cisco IOS Release 12.2(33)SB5 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB4
There are no new FPGA images for Cisco IOS Release 12.2(33)SB4. All Cisco IOS Release 12.2(33)SB4 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB3
There are no new FPGA images for Cisco IOS Release 12.2(33)SB3. All Cisco IOS Release 12.2(33)SB3 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB2
There are no new FPGA images for Cisco IOS Release 12.2(33)SB2. All Cisco IOS Release 12.2(33)SB2 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB1
There are no new FPGA images for Cisco IOS Release 12.2(33)SB1. All Cisco IOS Release 12.2(33)SB1 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(33)SB.
Bundled FPGAs for Cisco IOS Release 12.2(33)SB
All Cisco IOS Release 12.2(33)SB software images for the Cisco 7304 support the bundled FPGAs that are listed in Table 6.
Table 5 Bundled FPGA Versions for Cisco IOS Release 12.2(33)SB Sorted by Hardware Type
Type
Bundled
Hardware Version
Time in MinutesCisco 7300 PXF VTMS
0x001C
1.00
0.00
NSE-100 Motherboard FPGA
0x0001
1.10
2.00
15
NSE-100-CR Motherboard FPGA
0x0001
1.13
4.00
15
NSE-100-CR Motherboard FPGA
0x0001
1.14
5.00
15
NSE-100 Daughterboard FPGA
0x0002
1.07
0.00
6
NSE-100 Daughterboard FPGA
0x0002
1.08
5.00
6
OC-3 POS line card FPGA
0x0004
0.22
2.00
8
OC-48 POS line card FPGA
0x0003
0.16
2.00
5
6E3 line card FPGA
0x0005
0.21
2.00
12
6T3 line card FPGA
0x0005
0.21
2.00
12
OC-12 POS line card FPGA
0x0006
0.20
1.00
12
OC-3 ATM line card FPGA
0x0007
0.19
2.00
8
OC-12 ATM line card FPGA
0x0007
0.19
2.00
8
CC-PA line card FPGA
0x0008
1.40
1.01
8
MSC-100 FPGA
0x000D
0.271
0.10
22
NPE-G100 FPGA (PS)
0x000A
2.05
0.30
12
NPE-G100 FPGA (ES)
0x000A
2.05
0.20
12
NSE-150 FPGA
0x000E
0.08
0.00
12
CC-PA IOS image
0x0021
0.0
1.00
—
CC-PA IOS image
0x0023
0.0
0.0
—
1 The MSC-100 FPGA bundle has changed from 0.27 to 0.29 for Cisco IOS Release 12.2(33)SB10.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB21
There are no new FPGA images for Cisco IOS Release 12.2(31)SB21. All Cisco IOS Release 12.2(31)SB1 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB20
The MSC-100 FPGA bundle has changed from 0.27 to 0.29 for Cisco IOS Release 12.2(31)SB20. All Cisco IOS Release 12.2(31)SB1 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB19
There are no new FPGA images for Cisco IOS Release 12.2(31)SB19. All Cisco IOS Release 12.2(31)SB1 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB18
There are no new FPGA images for Cisco IOS Release 12.2(31)SB18. All Cisco IOS Release 12.2(31)SB18 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB17
There are no new FPGA images for Cisco IOS Release 12.2(31)SB17. All Cisco IOS Release 12.2(31)SB17 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB16
There are no new FPGA images for Cisco IOS Release 12.2(31)SB16. All Cisco IOS Release 12.2(31)SB16 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB15
There are no new FPGA images for Cisco IOS Release 12.2(31)SB15. All Cisco IOS Release 12.2(31)SB15 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB14
There are no new FPGA images for Cisco IOS Release 12.2(31)SB14. All Cisco IOS Release 12.2(31)SB14 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB13
There are no new FPGA images for Cisco IOS Release 12.2(31)SB13. All Cisco IOS Release 12.2(31)SB13 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB12
There are no new FPGA images for Cisco IOS Release 12.2(31)SB12. All Cisco IOS Release 12.2(31)SB12 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB11
There are no new FPGA images for Cisco IOS Release 12.2(31)SB11. All Cisco IOS Release 12.2(31)SB11 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB10
There are no new FPGA images for Cisco IOS Release 12.2(31)SB10. All Cisco IOS Release 12.2(31)SB10 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB9
There are no new FPGA images for Cisco IOS Release 12.2(31)SB9. All Cisco IOS Release 12.2(31)SB9 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB8
There are no new FPGA images for Cisco IOS Release 12.2(31)SB8. All Cisco IOS Release 12.2(31)SB8 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB7
There are no new FPGA images for Cisco IOS Release 12.2(31)SB7. All Cisco IOS Release 12.2(31)SB7 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB6
There are no new FPGA images for Cisco IOS Release 12.2(31)SB6. All Cisco IOS Release 12.2(31)SB6 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB5
There are no new FPGA images for Cisco IOS Release 12.2(31)SB5. All Cisco IOS Release 12.2(31)SB5 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB3
There are no new FPGA images for Cisco IOS Release 12.2(31)SB3. All Cisco IOS Release 12.2(31)SB3 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(31)SB2.
Bundled FPGAs for Cisco IOS Release 12.2(31)SB2
All Cisco IOS Release 12.2(31)SB2 software images for the Cisco 7304 support the bundled FPGAs that are listed in Table 6.
Table 6 Bundled FPGA Versions for Cisco IOS Release 12.2(31)SB2 Sorted by Hardware Type
Type
Bundled
Hardware Version
Time in MinutesNSE-100 Motherboard FPGA
0x0001
1.10
2.00
15
NSE-100-CR Motherboard FPGA
0x0001
1.13
4.00
15
NSE-100-CR Motherboard FPGA
0x0001
1.14
5.00
15
NSE-100 Daughterboard FPGA
0x0002
1.07
0.00
6
NSE-100 Daughterboard FPGA
0x0002
1.08
5.00
6
OC-48 POS line card FPGA
0x0003
0.16
2.00
5
OC-3 POS line card FPGA
0x0004
0.22
2.00
8
6E3 line card FPGA
0x0005
0.21
2.00
12
6T3 line card FPGA
0x0005
0.21
2.00
12
OC-12 POS line card FPGA
0x0006
0.20
1.00
12
OC-3 ATM line card FPGA
0x0007
0.19
2.00
8
OC-12 ATM line card FPGA
0x0007
0.19
2.00
8
CC-PA line card FPGA
0x0008
1.40
1.01
8
NPE-G100 FPGA (PS)
0x000A
2.05
0.30
12
NPE-G100 FPGA (ES)
0x000A
2.05
0.20
12
MSC-100 FPGA
0x000D
0.271
0.10
22
NSE-150 FPGA
0x000E
0.08
0.00
12
1 The MSC-100 FPGA bundle has changed from 0.27 to 0.29 for Cisco IOS Release 12.2(31)SB20.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB13
There are no new FPGA images for Cisco IOS Release 12.2(28)SB13. All Cisco IOS Release 12.2(28)SB13 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB12
There are no new FPGA images for Cisco IOS Release 12.2(28)SB12. All Cisco IOS Release 12.2(28)SB12 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB11
There are no new FPGA images for Cisco IOS Release 12.2(28)SB11. All Cisco IOS Release 12.2(28)SB11 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB10
There are no new FPGA images for Cisco IOS Release 12.2(28)SB10. All Cisco IOS Release 12.2(28)SB10 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB9
There are no new FPGA images for Cisco IOS Release 12.2(28)SB9. All Cisco IOS Release 12.2(28)SB9 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB8
There are no new FPGA images for Cisco IOS Release 12.2(28)SB8. All Cisco IOS Release 12.2(28)SB8 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB7
There are no new FPGA images for Cisco IOS Release 12.2(28)SB7. All Cisco IOS Release 12.2(28)SB7 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB6
There are no new FPGA images for Cisco IOS Release 12.2(28)SB6. All Cisco IOS Release 12.2(28)SB6 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB5
There are no new FPGA images for Cisco IOS Release 12.2(28)SB5. All Cisco IOS Release 12.2(28)SB5 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB4
There are no new FPGA images for Cisco IOS Release 12.2(28)SB4. All Cisco IOS Release 12.2(28)SB4 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB3
There are no new FPGA images for Cisco IOS Release 12.2(28)SB3. All Cisco IOS Release 12.2(28)SB3 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB2
There are no new FPGA images for Cisco IOS Release 12.2(28)SB2. All Cisco IOS Release 12.2(28)SB2 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB1
There are no new FPGA images for Cisco IOS Release 12.2(28)SB1. All Cisco IOS Release 12.2(28)SB1 software images for the Cisco 7304 support the bundled FPGAs that were released in Release 12.2(28)SB.
Bundled FPGAs for Cisco IOS Release 12.2(28)SB
All Cisco IOS Release 12.2(28)SB software images for the Cisco 7304 support the bundled FPGAs that are listed in Table 7.
Shared Port Adapter FPD Image Packages for the Cisco 7304
Field-programmable device (FPD) image packages are used to update shared port adapter (SPA) FPD images. If a discrepancy exists between an SPA FPD image and the Cisco IOS image that is running on the router, the SPA will be deactivated until this discrepancy is resolved. For additional information on FPDs, including the upgrade process, see the "Upgrading Field-Programmable Devices" section of the Cisco 7304 Modular Services Card and Shared Port Adapter Software Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/73mscspa/mscspasw/index.htm
Note
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB10
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB10 is the c7304-fpd-pkg.122-33.SB10 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB9
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB9 is the c7304-fpd-pkg.122-33.SB9 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB8
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB8 is the c7304-fpd-pkg.122-33.SB8 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB7
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB7 is the c7304-fpd-pkg.122-33.SB7 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB6
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB6 is the c7304-fpd-pkg.122-33.SB6 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB5
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB5 is the c7304-fpd-pkg.122-33.SB5 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB4
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB4 is the c7304-fpd-pkg.122-33.SB4 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB3
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB3 is the c7304-fpd-pkg.122-33.SB3 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB2
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB2 is the c7304-fpd-pkg.122-33.SB2 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB1
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB1 is the c7304-fpd-pkg.122-33.SB1 pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(33)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(33)SB
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(33)SB is the c7304-fpd-pkg.122-32.9.37.SB pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB21
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB21 is the c7304-fpd-pkg.122-31.SB21.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB20
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB20 is the c7304-fpd-pkg.122-31.SB20.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB19
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB19 is the c7304-fpd-pkg.122-31.SB19.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB18
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB18 is the c7304-fpd-pkg.122-31.SB18.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB17
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB17 is the c7304-fpd-pkg.122-31.SB17.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB16
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB16 is the c7304-fpd-pkg.122-31.SB16.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB15
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB15 is the c7304-fpd-pkg.122-31.SB15.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB14
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB14 is the c7304-fpd-pkg.122-31.SB14.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB13
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB13 is the c7304-fpd-pkg.122-31.SB13.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB12
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB12 is the c7304-fpd-pkg.122-31.SB12.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB11
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB11 is the c7304-fpd-pkg.122-31.SB11.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB10
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB10 is the c7304-fpd-pkg.122-31.SB10.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB9
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB9 is the c7304-fpd-pkg.122-31.SB9.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB8
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB8 is the c7304-fpd-pkg.122-31.SB8.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB7
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB7 is the c7304-fpd-pkg.122-31.SB7.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB6
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB6 is the c7304-fpd-pkg.122-31.SB6.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB5
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB5 is the c7304-fpd-pkg.122-31.SB5.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB3
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB3 is the c7304-fpd-pkg.122-31.SB3.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(31)SB2.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(31)SB2
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(31)SB2 is the c7304-fpd-pkg.122-31.SB2.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB13
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB13 is the c7304-fpd-pkg.122-28.SB13.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB12
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB12 is the c7304-fpd-pkg.122-28.SB12.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB11
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB11 is the c7304-fpd-pkg.122-28.SB11.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB10
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB10 is the c7304-fpd-pkg.122-28.SB10.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB9
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB9 is the c7304-fpd-pkg.122-28.SB9.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB8
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB8 is the c7304-fpd-pkg.122-28.SB8.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB7
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB7 is the c7304-fpd-pkg.122-28.SB7.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB6
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB6 is the c7304-fpd-pkg.122-28.SB6.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB5
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB5 is the c7304-fpd-pkg.122-28.SB5.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB4
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB4 is the c7304-fpd-pkg.122-28.SB4.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB3
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB3 is the c7304-fpd-pkg.122-28.SB3.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB2
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB2 is the c7304-fpd-pkg.122-28.SB2.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB1
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB1 is the c7304-fpd-pkg.122-28.SB1.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com. The content of this SPA FPD image package is the same as the content of the SPA FPD image package for Release 12.2(28)SB.
Shared Port Adapter FPD Image Package for Cisco IOS Release 12.2(28)SB
The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.2(28)SB is the c7304-fpd-pkg.122-28.SB.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image from the Software Center on Cisco.com.
Feature Support
Cisco IOS software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS software images are included in a release. Each feature set contains specific Cisco IOS features.
Caution
Feature-to-image mapping is available through Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). You can compare Cisco IOS software releases side-by-side to display both the features unique to each software release and the features that the releases have in common.
Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:
For help with Cisco Feature Navigator, see the help information at the following URL:
http://www.cisco.com/web/applicat/CFNTOOLS/Help_Docs/help/cfn_support.html
Determining the Software Images (Feature Sets) That Support a Specific Feature
To determine which software images (feature sets) in a Cisco IOS release support a specific feature, go to the Cisco Feature Navigator home page and perform the following steps.
Step 1
Step 2
Step 3
Step 4
Note
Repeat this step to add features. A maximum of 20 features can be chosen for a single search.
Step 5
Step 6
Step 7
Note
Determining the Features Supported in a Specific Software Image (Feature Set)
To determine which features are supported in a specific software image (feature set), go to the Cisco Feature Navigator home page and perform the following steps.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Note
Memory Recommendations
To determine memory recommendations for software images (feature sets) in your Cisco IOS release, go to the Cisco Feature Navigator home page and perform the following steps.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
New and Changed Information
This section lists the new hardware and software features supported by Cisco IOS Release 12.2SB and contains the following subsections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Note
Note
New Hardware Features in Cisco IOS Release 12.2(33)SB8
There are no new hardware features in Cisco IOS Release 12.2(33)SB8.
New Software Features in Cisco IOS Release 12.2(33)SB8
This section describes new and changed features in Cisco IOS Release 12.2(33)SB8. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SB8. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
BGP VRF-Lite iBGP Peering
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The BGP VRF-Lite iBGP Peering feature provides the ability to have VRF-lite aware iBGP Peers.
MLPoE LAC Switching
Platform: Cisco 10000 series (PRE-3 and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/mlp.html#wp1639566
However, due to PXF resource limitations, the MLPoe LAC Switching feature is supported on the PRE3 and PRE4 platform only.
•
•
New Hardware Features in Cisco IOS Release 12.2(33)SB7
There are no new hardware features in Cisco IOS Release 12.2(33)SB7.
New Software Features in Cisco IOS Release 12.2(33)SB7
This section describes new and changed features in Cisco IOS Release 12.2(33)SB7. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SB7. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Lawful Intercept Enhancements
Platform: Cisco 10000 series (PRE-2 and PRE-3)
In Cisco IOS Release 12.2(33)SB7, LI support for L2TP LNS applications is introduced for the Lawful Intercept feature.
New Hardware Features in Cisco IOS Release 12.2(33)SB3
There are no new hardware features in Cisco IOS Release 12.2(33)SB3.
New Software Features in Cisco IOS Release 12.2(33)SB3
This section describes new and changed features in Cisco IOS Release 12.2(33)SB3. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SB3. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Convergence Acceleration
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The Convergence Acceleration feature allows faster failover of IGP routes in both equal and unequal cost paths
For detailed information about this feature, see the following Cisco document:
New Hardware Features in Cisco IOS Release 12.2(33)SB2
This section describes new and changed features in Cisco IOS Release 12.2(33)SB2. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SB2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
8-Port Gigabit Ethernet SPA V2
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The 8-port Gigabit Ethernet SPA, version 2, is a half-height SPA that has eight individual fiber optic receivers that support SFPs. Each port can send and receive traffic using the optical fiber connections. For more information, see the Cisco 10000 Series SIP and SPA Hardware Installation Guide at http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10kspahwg.html and the Cisco 10000 Series Router SIP and SPA Software Configuration Guide at http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/10000series/10kspaswg.html.
New Software Features in Cisco IOS Release 12.2(33)SB2
This section describes new and changed features in Cisco IOS Release 12.2(33)SB2. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SB2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
IPv6 VPN over MPLS (6VPE) Inter-AS Options on the Cisco 10000 Series Router
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The IPv6 VPN over MPLS (6VPE) functionality supports enabling of interautonomous-system access using the Inter-AS options on PRE 3 and PRE 4 cards.
L2TP Forwarding of PPPoE Tagging Information Scalability on the Cisco 10000 Series Router
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The L2TP Forwarding of PPPoe Tagging Information Scalability feature on the Cisco 10000 Series Router feature allows you to transfer DSL line information from the L2TP Access Concentrator (LAC) to the L2TP Network Server (LNS). Using this feature, you can also override the nas-port-id and/or calling-station-id VSAs on the LNS with the Circuit-ID and Remote-ID VSA respectively. This feature is supported on the Cisco 10000 series router.
For more information, refer to the L2TP Forwarding of PPPoe Tagging Information Scalability on the Cisco 1000 Series Router document at:
MLP at LNS with ATM Tunnel
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The MLP at LNS with ATM Tunnel feature allows service providers to support MLP and LFI on single-link MLP bundles as DSL aggregation networks migrate to Ethernet-based connectivity to BRAS usage, with the mix of Ethernet and ATM access networks. This feature supports MLP bundles on an L2TP LNS with ATM tunnel.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/mlp.html
MLP at LNS with HQoS and ATM Overhead Accounting
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The MLP at LNS with HQoS and ATM Overhead Accounting feature supports MLP bundles on L2TP LNS with H-QoS on a single-member bundle.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qacct.html
MLPoE LAC Switching
Platform: Cisco 10000 series (PRE-3)
The MLPoE LAC Switching feature supports MLPoE between CPE and LAC, and switching the MLPoE to the LNS. However, due to PXF resource limitations, this feature is supported on the PRE3 platform only.
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/mlp.html
New Hardware Features in Cisco IOS Release 12.2(33)SB
This section describes new and changed features in Cisco IOS Release 12.2(33)SB. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SB. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
1-Port 10 Gigabit Ethernet Shared Port Adapter, LANPHY XFP Optics
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The Cisco 1-Port 10-GE SPA is a single height SPA. The interface connector on this SPA is a fiber optic receiver that supports one XFP. The SPA provide standards-based 10-GE implementation for compatibility and interoperability. For more information, see the Cisco 10000 Series SIP and SPA Hardware Installation Guide and the Cisco 10000 Series SIP and SPA Software Configuration Guide:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10ovspa.html
2-Port Gigabit Ethernet Shared Port Adapter
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The Cisco 2-Port GE SPA is a single height SPA. The interface connector on this SPA is a fiber optic receiver that supports SFPs. The SPA provide standards-based GE implementation for compatibility and interoperability. For more information see, the Cisco 10000 Series SIP and SPA Hardware Installation Guide and the Cisco 10000 Series SIP and SPA Software Configuration Guide.
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10ovspa.html
5-Port Gigabit Ethernet Shared Port Adapter
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The Cisco 2-Port GE SPA is a single height SPA. The interface connector on this SPA is a fiber optic receiver that supports SFPs. The SPA provide standards-based GE implementation for compatibility and interoperability. For more information see, the Cisco 10000 Series SIP and SPA Hardware Installation Guide and the Cisco 10000 Series SIP and SPA Software Configuration Guide.
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10ovspa.html
Cisco 10000 Series Performance Routing Engine 4
Platform: Cisco 10000 series (PRE-3, PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/install_and_upgrade/pre_installation/pre4_guide/pre4ins.html
Cisco 10000 Series SPA Interface Processor-600
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The Cisco 10000 Series SPA Interface Processor-600 is designed to enable four half-height or two full-height SPAs using two adjacent line-card slots of the Cisco 10000 Series router. Using application specific integrated circuits (ASIC) with flexibility to bond together point-to-point links, the SIP provides up to 11.2 Gbps of bandwidth and support for 10GE interface at line-rate. For more information see, the Cisco 10000 Series SIP and SPA Hardware Installation Guide.
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10ovrsip.html
New Software Features in Cisco IOS Release 12.2(33)SB
This section describes new and changed features in Cisco IOS Release 12.2(33)SB. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SB. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
1-Port 10 Gigabit Ethernet Shared Port Adapter, LANPHY XFP Optics
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The Cisco 1-Port 10-GE SPA is a single height SPA. The interface connector on this SPA is a fiber optic receiver that supports one XFP. The SPA provide standards-based 10-GE implementation for compatibility and interoperability. For more information, see the Cisco 10000 Series SIP and SPA Hardware Installation Guide and the Cisco 10000 Series SIP and SPA Software Configuration Guide:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10ovspa.html
Alarm Filtering Support in the Cisco Entity Alarm MIB
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_alarm_mib.html
Any Transport over MPLS (AToM): Remote Ethernet Port Shutdown
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/atom.html
Any Transport over MPLS (AToM): Tunnel Selection
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Any Transport over MPLS (AToM): Tunnel Selection feature allows you to select core-facing paths and map these paths to groups of AToM VCs. You can configure a preferred path by specifying either an MPLS traffic engineering (TE) tunnel or destination IP address/DNS name.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/atom.html
AToM Class-Based Match Frame Relay DE
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The AToM Class-Based Match Frame Relay DE feature enables you to classify traffic based on the setting of the Frame Relay DE bit.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Classifying Traffic" chapter, "Defining Match Criteria Using the match Commands" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
AToM Set FR DE as Police Action
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The AToM Set Frame Relay DE as Police Action feature enables you to set the Frame Relay discard eligibility (DE) bit using the set-frde-transmit policing action.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Policing Traffic" chapter, "Policing Actions" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
ATM VP Average Traffic Rate
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The ATM VP Average Traffic Rate feature is a subscriber and virtual path (VP) traffic reporting feature that enables you to display the 5-minute traffic rates on VP counters.
This feature extends the show atm vp command to provide rate information. Minute counters on the ATM VPs support the show atm vp command.
For detailed information about this feature, see the ATM VP Average Traffic Rate, Release 12.2(33)SB feature guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/feature/guides/122_33SB/avgrate.html
BFD Echo Mode
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
BFD Version 1 Support
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
BFD—VRF Support
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
BFD—WAN Interface Support (ATM, FR, POS, and Serial)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
BGP Features
Cisco IOS Release 12.2(33)SB introduces support for the following BGP features.
BGP Neighbor Policy
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bgp_basic_net.html
BGP Per Neighbor SOO Configuration
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bgp_neighbor_soo.html
BGP Route-Map Continue Support for Outbound Policy
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bgp_external_sp.html
BGP Support for BFD
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bgp_adv_features.html
Bidirectional Forwarding Detection (BFD) Standard Implementation
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
Cisco Express Forwarding—SNMP CEF-MIB Support
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipswitch/configuration/guide/cef_snmp_mib.html
Cisco IOS Scripting with Tcl
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_script_tcl.html
CISCO-DATA-COLLECTION-MIB
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_mib_collect_trans.html
CNS
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
CNS—Configuration Agent
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
CNS—Event Agent
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
CNS—Image Agent
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
CNS Config Retrieve Enhancement with Retry and Interval
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
Command Scheduler (Kron)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
Command Scheduler (Kron) Policy for System Startup
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
Config Change Tracking Identifier
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Config Change Tracking Identifier feature assigns a version number to each saved version of the Cisco IOS running-config file, and displays output about the versions. When the version number is updated, a notification of the change in version number is generated. The Config Logger can also use this feature to determine if there have been any changes to the Cisco IOS running-config file. To enable the Config Change Tracking Identifier feature, enter the show config id command.
Config Logger Persistency
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/config-logger-6149.html
Configuration Change Notification and Logging
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/cf_config-logger.html
Configuration Generation Performance Enhancement
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/config_cache.html
Configuration Partitioning
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/cf_partition.html
Configuration Replace and Configuration Rollback
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/cf_config-rollback.html
Configuration Rollback Confirmed Change
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/cf_config-rollback.html
Contextual Configuration Diff Utility
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/cf_config-diff.html
Control Plane Policing—Platform Improvement
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Control Plane Policing—Platform Enhancement feature enhances CoPP by providing the following functionality:
•
Using this feature, you can monitor individual users and display statistical information about traffic that the parallel express forwarding (PXF) engine sends (punts) to the Route Processor (RP). This information allows you to see when a DoS attack occurs. You can then take action by dropping or rate-limiting the punted traffic.
•
•
For detailed information about this feature, see the Cisco 10000 Series Router Control Plane Policing—Platform Enhancement, Release 12.2(33)SB feature guide:
DHCPv6—Relay—Reload Persistent Interface ID Option
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
Embedded Event Manager (EEM) 2.3
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_eem_overview.html
Embedded Resource Manager (ERM)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_erm_resource.html
Embedded Resource Manager (ERM)—MIB
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_erm_mib.html
Embedded Syslog Manager (ESM)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_esm_syslog.html
EtherChannel Mini-Links
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lnkbndl.html
Ethernet Overhead Accounting
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Ethernet Overhead Accounting feature enables the router to account for downstream Ethernet frame headers when applying shaping to packets.
A user-defined offset specifies the number of overhead bytes the router is to use when calculating the overhead per packet. The router calculates the overhead before applying shaping.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Overhead Accounting" chapter, "Ethernet Overhead Accounting" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
Exclusive Configuration Change Access and Access Session Locking
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/cf_config-lock.html
GEC—8 Member Links
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbcelacp.html#wp1053782
HTTP TACAC+ Accounting Support
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_http_web.html
HTTPS—HTTP Server and Client with SSL 3.0
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_https_sc_ssl3.html
IEEE 802.1Q and QinQ Support on GEC
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
IEEE 802.1Q Tunneling (QinQ) for AToM
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/atom.html
Gigabit EtherChannel Features
Cisco IOS Release 12.2(33)SB introduces support for the following Gigabit EtherChannel (GEC) features.
IEEE 802.3ad—Faster Link Switchover Time
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lnkbndl.html
IEEE 802.3ad—Maximum Number of Links Increased
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lnkbndl.html
IEEE 802.3ad MIB
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lacpmib.html
ISSU—GEC
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
MVPN—Support on GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
NSF—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
NSR—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
PBR—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
PPPoEoE—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
PPPoEoQinQ—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
PPPoVLAN—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
QoS—Service Policies on Aggregate GEC
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
SSO—GEC
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
IGP Convergence Acceleration
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The IGP Convergence Acceleration feature allows faster failover of IGP routes in a load balanced situation.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/dffsrv.html
Interfaces MIB: SNMP Context Based Access
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The interface MIB (IF-MIB) has been modified to support context-aware packet information in virtual route forwarding (VRF) environments. VRF environments require that contexts apply to VPNs so that clients can be given selective access to the information stored in the IF-MIB. Clients that belong to a particular VRF can access information about the interface from the IF-MIB that belongs to that VRF only. When a client tries to get information from an interface that is associated with a particular context, the client can see only the information that belongs to that context and cannot see information to which it is not entitled. No commands have been modified or added to support this feature. This feature is automatically enabled when VRF is configured.
The IF-MIB supports all tables defined in RFC 2863 and the CISCO- IFEXTENSION-MIB.
IP SLAs—LSP Health Monitor
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html
IP SLAs—LSP Health Monitor with LSP Discovery
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html
IP SLAs for Metro-Ethernet
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html
IP SLAs for MPLS Pseudo Wire (PWE3) via VCCV
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html
IP SLAs Random Scheduler
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_multi_scheduler.html
IPv6—CNS Agents
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—Config Logger
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—HTTP(S)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—IP SLAs (UDP Jitter, UDP Echo, ICMP Echo, TCP Connect)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—Netconf
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—SOAP
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6 Default Router Preferences
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html
IPv6 VPN over MPLS (6VPE)
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The IPv6 VPN over MPLS (6VPE) feature enables IPv6 sites in a VPN that communicates with each other over an MPLS IPv4 core network using MPLS LSPs. This feature relies on multiprotocol BGP extensions in the IPv4 network configuration on the provider edge (PE) router to exchange IPv6 VPN reachability information in addition to an MPLS label for each IPv6 address prefix to be advertised. PE routers are configured to be dual stack to support both IPv4 and IPv6. In a dual stack configuration, IPv4 and IPv6 VPNs can coexist with similar coverage and policies. The implementation also provides IPv6 VRF-Lite support.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/dffsrv.html
Intelligent Service Gateway (ISG) Features
Cisco IOS Release 12.2(33)SB introduces support for the following Intelligent Service Gateway (ISG) features.
ISG: Flow Control: Flow Redirect (PXF scaling)
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/scaling.html
ISG: Flow Control: QoS Control: MQC Support for IP Sessions
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Modular QoS CLI (MQC) Support for IP Sessions feature extends the router's QoS functionality to support per-user QoS on IP sessions. Using this feature, you can configure queuing and non-queuing features on IP sessions, either locally on the router or remotely using an authentication, authorization, and accounting (AAA) server such as RADIUS. This feature also supports dynamic interface association (interface redundancy) for IP sessions, L2TP network server (LNS) sessions, and L2TP access concentrator (LAC) sessions.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Regulating and Shaping Subscriber Traffic" chapter, "MQC Support for IP Sessions" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
ISG: Policy Control: ISG-SCE Control Bus
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_sce_control_bus.html
ISG:Session:Protection and Resiliency:Keepalive—ARP, ICMP
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_pol_sessn_maint.html
IS-IS Support for BFD over IPv4
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
ISSU—GEC
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
ISSU—SNMP
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ha/configuration/guide/ha-inserv_updg.html
ISSU Support for 2 Port GE SPA V2 with 2 RJ45 Ports
Platform: Cisco 10000 series (PRE-3 and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10ovspa.html
ISSU Support for 5 Port GE SPA V2
Platform: Cisco 10000 series (PRE-3 and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/10000series/10ovspa.html
L2TP Forwarding of PPPoE Tag Information
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/vpdn/configuration/guide/config_aaa_for_vpdn.html
L2VPN Interworking: Ethernet VLAN to ATM AAL5
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/l2vpn.html
L2VPN Interworking: Ethernet/VLAN to Frame Relay
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/l2vpn.html
L2VPN Local Switching—HDLC/PPP
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The L2VPN Local Switching—HDLC/PPP feature enables local switching capability for HDLC and PPP AC in L2VPN.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_l2_lcl_swng.html
Logging to Local Nonvolatile Storage (ATA Disk)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_log_local_nonvol.html
MLP on LNS
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The MLP at LNS feature allows service providers to support MLP and LFI on single-link MLP bundles. This enables high-priority, low-latency packets to be interleaved between fragments of lower-priority higher-latency packets.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/mlp.html
MPLS Features
Cisco IOS Release 12.2(33)SB introduces support for the following MPLS features.
MPLS EM—MPLS LDP MIB (RFC3815)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_em_ldp_mib_3815.html
MPLS EM—MPLS LSR MIB (RFC3813)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_em_ldp_mib_3813.html
MPLS EM—MPLS VPN MIB RFC4382 Upgrade
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_em_vpn_mib_4382.html
MPLS Enhancements to Interfaces MIB
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_enchance_mib.html
MPLS LDP—IGP Synchronization
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_igp_synch.html
Note
MPLS LDP—Local Label Allocation Filtering
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_alloc_filter.html
MPLS LDP—Lossless MD5 Session Authentication
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_lossless_md5.html
MPLS LDP—VRF Aware Static Labels
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vrf_aware_static.html
MPLS Static Labels
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vrf_aware_static.html
MPLS VPN Features
Cisco IOS Release 12.2(33)SB introduces support for the following MPLS VPN features.
MPLS VPN—BGP Local Convergence
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_pece_lnk_prot.html
MPLS VPN—VRF CLI for IPv4 and IPv6 VPNs
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_ipv4_ipv6.html
MQC—Traffic Shaping Overhead Accounting for ATM
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/overhead_acctng.html
MVPN—Support on GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
NAT—Route Maps in PXF
The NAT—Route Maps in PXF feature introduces the ability for NAT to use route maps for translation purposes in the PXF processing path on Cisco 7304 routers using an NSE-100 or an NSE-150.
For additional information on this feature, see the PXF Information for Cisco 7304 Routers document.
Netconf Access for Configuration over BEEP
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_netconf.html
NETCONF over SSHv2
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_netconf.html
Netflow Multicast Support
Platform: Cisco 10000 series (PRE-3 and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netflow/configuration/guide/cfg_nf_multi_acctg.html
NSF—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
NSF/SSO—Any Transport over MPLS (AToM)
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The NSF/SSO—Any Transport over MPLS (AToM) feature improves the availability of a network that uses AToM to provide Layer 2 VPN services. AToM NSF/SSO provides the ability to detect failures and handle them with minimal disruption to the service being provided. AToM NSF is achieved by SSO and NSF mechanisms. A standby Route Processor (RP) provides control-plane redundancy. The control plane state and data plane provisioning information for the attachment circuits (ACs) and AToM pseudowires (PWs) are checkpointed to the standby RP to provide NSF for AToM L2VPNs upon switchover from the primary RP.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/atom.html
NSR—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
OSPF Graceful Shutdown
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_ospf_ttl.html
OSPF Support for BFD over IPv4
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
OSPFv2 Local RIB
Platform: Cisco 10000 series (PRE-1, PRE-2, and PRE3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_ospf_local_rib.html
OSPFv3 Fast Convergence—LSA and SPF Throttling
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ospf.html
PBR—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
Periodic MIB Data Collection and Transfer Mechanism
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_mib_collect_trans.html
Policy Map Scaling Phase 2
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Policy Map Scaling Phase 2 feature enables the router to support a maximum of 8192 unique policy maps for the PRE3 and PRE4, doubling the number supported in previous releases. The router continues to support up to 4096 policy maps for the PRE2.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Configuring QoS Policy Actions and Rules" chapter, "8K Policy Maps" section:
PPPoE—QinQ Support
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_pppoe_qinq.html
PPPoE over VLANs Scaling and PPPoE over VLANs Forwarding over PVC
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_vlan_enh.html
PPPoE—Session Limit Local Override
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_sllov.html
PPPoE—Smart Server Selection
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_pppoe_sss.html
PPPoEoE—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
PPPoEoQinQ—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
PPPoVLAN—Support for GEC Bundle
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
PPPoX Hitless Failover
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lnkbndl.html
QoS: ATM-CLP-Based WRED
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The QoS: ATM-CLP-Based WRED feature configures a drop policy for WRED based on a cell loss priority (CLP) value. Valid values are 0 or 1. When this feature is configured, the router uses the value of the CLP bit to randomly drop packets leaving the pseudowire and going out an ATM interface. The router also supports ATM CLP-based WRED on non-Layer2 VPN outbound ATM interfaces.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Managing Packet Queue Congestion" chapter, "Controlling Congestion Using Weighted Random Early Detection" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
QoS: Per-Session Shaping for ATM Interfaces
Platform: Cisco 10000 series (PRE-3 and PRE-4)
The QoS: Per-Session Shaping for ATM Interfaces feature enables the router to shape session traffic on L2TP network server (LNS) outbound ATM interfaces.
Using this feature, you can apply a hierarchical QoS policy to an ATM interface and manage the traffic belonging to a session. The shaping feature configured in the parent policy map shapes the classes of traffic that comprise the session traffic and the queuing features configured in the child policies enables the router to queue the session packets, rather than drop them.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Regulating and Shaping Subscriber Traffic" chapter, "Per Session Shaping for ATM Interfaces" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
QoS—Service Policies on Aggregate GEC
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
QoS—Set ATM CLP Bit Using Policer
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Set ATM CLP bit using a policer feature enables you to set the ATM cell loss priority (CLP) bit using the set-clp-transmit policing action.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Policing Traffic" chapter, "Policing Actions" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
QoS: Set L2 CoS as a Policer Action
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The QoS: Set L2 CoS as a Policer Action feature enables you to set the Layer 2 class of service (CoS) bits using the set-cos-transmit policing action.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Policing Traffic" chapter, "Policing Actions" section:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
QoS: Simultaneous Policy Map on Interface and PPP Session
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The QoS: Simultaneous Policy Map on Interface and PPP Session feature allows the broadband aggregation system (BRAS) to provide multiple levels of QoS hierarchy that shape traffic at different points of congestion in the Layer 2 network. This enables the BRAS to avoid congestion in downstream links within the network.The BRAS prioritizes the traffic based on the subscriber's contracted bandwidth and subscribed services.
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide "Simultaneous Policy Maps" chapter:
http://cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
QoS: Tunnel Marking for GRE Tunnels
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/tnl_mrkg_gre_tnls.html
Reliable Delivery and Filtering for Syslog
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_reliable_del_filter.html
RFC 3020 Multilink Frame Relay MIB Support
Platform: Cisco 10000 series (PRE-3 and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_ml_fr_mib_3020.html
RFC 4293 IP-MIB (IPv6 Only)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
Role-Based Access Control CLI Commands
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_role_base_cli.html
Secure SNMP Views
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The USM, VACM and Community MIBs have information that can potentially be used to gain access to the router using SNMP. Therefore, the USM, VACM, and Community MIBs are excluded from the default SNMP access view so as not to allow remote access unless specifically configured. However, when an SNMP view is created with any parent object identifier (OID) of these MIBs included (for example "internet included"), these MIBs also get included in the view. To increase security, the Secure SNMP Views enhancement excludes these MIBs from SNMP access views even when parent OIDs are included in the view. Prior to this release, when configuring SNMP views with parent OIDs that include the USM, VACM, or Community OIDs, the user was required to explicitly exclude them. For example, the following configuration can be used for excluding security-sensitive MIBs from the SNMP view named "test":
! - include all MIBs under the parent tree "internet" snmp-server view test internet included
! -- exclude snmpUsmMIB snmp-server view test 1.3.6.1.6.3.15 excluded
! -- exclude snmpVacmMIB snmp-server view test 1.3.6.1.6.3.16 excluded
! -- exclude snmpCommunityMIB snmp-server view test 1.3.6.1.6.3.18 excluded
Beginning in Cisco IOS Releases 12.0(26)S and 12.2(2)T, the USM, VACM, and Community MIBs are excluded from any parent OIDs in a configured view by default. If you wish to include these MIBs in a view, you must now explicitly include them.
SNMP Support for MTR
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/mtr/configuration/guide/multi-top_rtng.html
SNMP Support for VPNs
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_snmp_sup.html
SNMPv3—3DES and AES Encryption Support
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_encrypt_snmp_sup.html
SSO—BFD (Admin Down)
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
SSO—GEC
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/gec.html
SSO—LACP
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lnkbndl.html
Static Routes for BFD
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
Syslog over IPV6
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
System Logging—EAL4 Certification Enhancements
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
Note
This feature includes the following enhancements:
•
•
•
•
Throttling of AAA (RADIUS) Records
Platforms: Cisco 7304-NPE-G100, Cisco 7304-NSE-100, Cisco 7304-NSE-150, Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_throtl_aaa.html
Unicast Reverse Path Forwarding (uRPF)
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
The Unicast Reverse Path Forwarding (uRPF) feature is used to verify that the path of an incoming packet is consistent with the local packet forwarding information. This is achieved by performing a reverse path lookup using the source IP address of an incoming packet to determine the current path to that IP address. The validity of this path determines whether uRPF passes or drops the packet.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/urpf.html
VRF-Aware VPDN Tunnels
Platform: Cisco 10000 series (PRE-2, PRE-3, and PRE-4)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/tunnlng.html
New Hardware Features in Cisco IOS Release 12.2(31)SB12
There are no new hardware features in Cisco IOS Release 12.2(31)SB12.
New Software Features in Cisco IOS Release 12.2(31)SB12
This section describes new and changed features in Cisco IOS Release 12.2(31)SB12. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB12. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Lawful Intercept for MLP
Platform: Cisco 10000 series routers
This feature supports SNMP-based Layer 3 lawful intercept on MLP bundles. For more information, see the "Lawful Intercept Overview" chapter in the Cisco 10000 Series Router Lawful Intercept Configuration Guide.
http://cisco.com/en/US/docs/routers/10000/10008/feature/guides/lawful_intercept/10LIovr.html
New Hardware Features in Cisco IOS Release 12.2(31)SB10
There are no new hardware features in Cisco IOS Release 12.2(31)SB10.
New Software Features in Cisco IOS Release 12.2(31)SB10
This section describes new and changed features in Cisco IOS Release 12.2(31)SB10. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB10. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
ATM OAM Loopback Mode Detection
The ATM OAM Loopback Mode Detection feature lets the router automatically detect when a peer ATM interface is in loopback mode. When loopback is detected on an interface where end-to-end F5 Operation, Administration, and Maintenance (OAM) is enabled, the impacted permanent virtual circuit (PVC) is moved to a DOWN state, and traffic is suspended. When the loopback condition in the peer ATM interface is removed, the PVC is moved back to an UP state.
For detailed information about this feature, see the following:
http://www.cisco.com/en/US/docs/ios/atm/configuration/guide/atm_lmd_oam.html
New Hardware Features in Cisco IOS Release 12.2(31)SB6
This section describes new and changed features in Cisco IOS Release 12.2(31)SB6. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB6. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
1000BASE-T SFP Pluggable Transceiver
The 1-port Gigabit Ethernet half-height line card supports the 1000BASE-T SFP pluggable transceiver for Category 5 copper wire. The SFP-GE-T provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over an existing copper network infrastructure. The SFP-GE-T maximum cabling distance is 328 feet (100 m). For more information, see to the Cisco 10000 Series Router Line Card Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/line_card__software/lncd-sw.html
New Software Features in Cisco IOS Release 12.2(31)SB6
This section describes new and changed features in Cisco IOS Release 12.2(31)SB6. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB6. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
PPP Session Queuing on ATM Virtual Circuits
PPP Session Queuing on ATM Virtual Circuits (VCs) enables you to shape and queue PPP over ATM (PPPoA) and PPP over Ethernet over ATM (PPPoEoA) sessions to a user specified rate. Multiple sessions can exist on any ATM VC and have QoS policies applied, or some of the sessions might have QoS policies while others do not. The router shapes the sum of all PPPoA or PPPoEoA traffic on a VC so that the subscriber's connection to the DSLAM does not become congested. Queuing-related functionality provides different levels of service to the various applications that execute over the PPPoA or PPPoEoA session.
For more information, see the "Configuring Dynamic Subscriber Services" chapter in the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
QoS: Per-Session Shaping and Queuing on LNS
Platform: Cisco 10000 series (PRE-3)
Note
The QoS: Per-Session Shaping and Queuing on LNS feature provides the ability to shape (for example, transmit or drop) or queue (for transmission later) the traffic going from an Internet service provider (ISP) to an ISP subscriber over a Layer 2 Tunneling Protocol (L2TP) Network Server (LNS). With this feature, the outgoing traffic is shaped or queued on a per-session basis.
For detailed information about this feature for the Cisco 10000 series, see the "Configuring Dynamic Subscriber Services" chapter in the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
New Hardware Features in Cisco IOS Release 12.2(31)SB5
This section describes new and changed features in Cisco IOS Release 12.2(31)SB5. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB5. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Cisco 7201 Router
The Cisco 7201 router provides application-specific features for broadband subscriber aggregation and network application services with high processing performance. The Cisco 7201 is a compact 1-rack-unit router that integrates the following components:
•
•
•
•
•
•
•
For detailed information about this product, see the Cisco 7201 Installation and Configuration Guide:
http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/7201_install_config/7201_icg.html
New Software Features in Cisco IOS Release 12.2(31)SB5
This section describes new and changed features in Cisco IOS Release 12.2(31)SB5. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB5. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Generic Routing Encapsulation Tunnel IP Source and Destination VRF Membership
Platform: Cisco 1000 series (PRE-2 and PRE-3)
The Generic Routing Encapsulation (GRE) Tunnel IP Source and Destination VRF Membership feature enables multicast traffic from subscribers to traverse a tunnel interface on the router and terminate in a VRF. Instead of the termination point being in the global routing table, the tunnel's source and destination endpoints terminate within a non-global VRF.
For detailed information about this feature, see the following document:
For additional information, see the "IP Tunneling" chapter in the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/feature/guides/122_31sb5/fs_gripvrf.html
New Hardware Features in Cisco IOS Release 12.2(31)SB3
There are no new hardware features in Cisco IOS Release 12.2(31)SB3.
New Software Features in Cisco IOS Release 12.2(31)SB3
This section describes new and changed features in Cisco IOS Release 12.2(31)SB3. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB3. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Embedded Event Manager (EEM) 2.2
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_eem22.html
IS-IS-MIB
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2/12_2sg/feature/guide/ismibspt.html
QoS: MQC Classification, Policing, and Marking on LAC
Platform: Cisco 10000 series (PRE-2)
Note
For detailed information about this feature, see the "Shaping Traffic" chapter in the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qshape.html
TCP MSS Adjustment
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the "Configuring PPPoE over Ethernet and IEEE 802.1Q VLAN" chapter in the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t4/feature/guide/ft_admss.html
New Hardware Features in Cisco IOS Release 12.2(31)SB2
This section describes new and changed features in Cisco IOS Release 12.2(31)SB2. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
1-Port Enhanced ATM Port Adapter with Support for 8000 VCs
Platform: Cisco 7304 (NSE-100, NSE-150, NPE-G100)
Note
Cisco IOS Release 12.2(31)SB2 adds support for the PA-A6 port adapters and support for 8000 virtual circuits (VCs) on PA-A6 port adapters that are installed in the Cisco 7304 router. The PA-A6 is a series of single-width, single-port, ATM port adapters. With advanced ATM features, the PA-A6 port adapters support broadband aggregation, WAN aggregation, and campus/MAN aggregation.
The following PA-A6 port adapters are supported:
•
•
•
•
•
For detailed information about these products, see the PA-A6 Port Adapter Installation and Configuration document:
http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/atm/pa-a6_ATM_install_config/pa-a6.html
1-Port Packet over SONET OC3c/STM1 Port Adapter
Platform: Cisco 7304 (NSE-100, NSE-150, NPE-G100)
For detailed information about the 1-port Packet over SONET OC3c/STM1 port adapter (PA-POS-1OC3), see the following documents:
•
http://www.cisco.com/en/US/prod/collateral/routers/ps341/product_data_sheet0900aecd80221d3d.html
•
•
Network Services Engine 150 (NSE-150)
Platform: Cisco 7304
The NSE-150 is a processor for the Cisco 7304 router. It contains two internal processors for forwarding network traffic: a Parallel eXpress Forwarding (PXF) processor, which accelerates the processing of IP packets for features supported in the PXF processing path; and a Route Processor (RP), which handles all non-IP packets and all packets that are not forwarded using the PXF processing path.
The NSE-150 introduces the following enhancements to the Cisco 7304 router:
•
•
•
•
•
For additional information on the NSE-150, see the Cisco 7304 Network Services Engine Installation and Configuration Guide:
http://www.cisco.com/en/US/docs/routers/7300/install_and_upgrade/7304/7304_fru/7304_nse_icg/nse.html
NPE-G2 Network Processing Engine
Platform: Cisco 7200VXR series
The Network Processing Engine NPE-G2 is the latest and highest-performing routing engine with the largest scalability within the family of network processing engines for the Cisco 7200VXR series. A new chip design on the NPE-G2 provides up to double the performance of the NPE-G1. This great performance improvement makes the NPE-G2 an ideal solution for the new aggregation services for enterprises and service providers.
The NPE-G2 offers following benefits:
•
•
•
•
•
•
•
•
Note
For detailed information about this product, see the following documents:
•
http://www.cisco.com/en/US/products/hw/routers/ps341/
products_data_sheet0900aecd8047177b.html•
http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/network_process_engine_install_config/4448o6.html
•
http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/network_process_engine_install_config/npense.html
Performance Routing Engine 3 (PRE-3)
Platform: Cisco 10000 series
For detailed information about this product, see the following documents:
•
http://www.cisco.com/en/US/products/hw/routers/ps133/
products_data_sheet0900aecd8049f279.html•
http://www.cisco.com/en/US/docs/routers/10000/10008/install_and_upgrade/pre_installation/pre3_guide/tcamcmds.html
Note
For information about these features, see the "New Software Features in Cisco IOS Release 12.2(28)SB" and "New Software Features in Cisco IOS Release 12.2(28)SB2" sections.
Port Adapter Jacket Card for Cisco 7200VXR Series (C7200-JC-PA)
Platform: Cisco 7200 series
The port adapter jacket card for the Cisco 7200VXR series addresses the demand for additional slot density and flexibility by enabling the I/O slot to hold a single port adapter for additional capacity on routers with the Cisco 7200VXR series NPE-G1 or NPE-G2. Benefits of the jacket card include the following:
•
•
•
•
For detailed information about this product, see the following documents:
•
http://www.cisco.com/en/US/products/hw/routers/ps341/
products_data_sheet0900aecd804419c6.html•
http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/port_adapter_jacket_card_install/8427J.html
New Software Features in Cisco IOS Release 12.2(31)SB2
This section describes new and changed features in Cisco IOS Release 12.2(31)SB2. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(31)SB2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Note
For information about these features, see the "New Software Features in Cisco IOS Release 12.2(28)SB" and "New Software Features in Cisco IOS Release 12.2(28)SB2" sections.
Table 11 lists the features that are supported for the Cisco 10000 series in Cisco IOS Release 12.2(31)SB2 and uses the following conventions:
•
•
•
Table 12 shows how select features for the Cisco 7304 are supported and uses the following conventions:
•
•
Table 12 Features Supported on the Cisco 7304 Engines and in the PXF Path
the PFX Path•
Yes
Yes
Yes
No
•
Yes
Yes
Yes
No
•
Yes
Yes
Yes
No
•
DeactivationYes
Yes
Yes
No
•
Yes
Yes
Yes
No
•
SessionYes
Yes
Yes
No
Cisco Express Forwarding - SNMP CEF-MIB Support
Yes
Yes
Yes
No
CISCO-IP-URPF-MIB Support
Yes
Yes
Yes
No
CISCO-NETFLOW-MIB
No
No
Yes
No
Clear IP Traffic CLI
Yes
Yes
Yes
No
CNS-Image Agent
Yes
Yes
Yes
No
Configuration Replace and Configuration Rollback
Yes
Yes
Yes
No
DHCP Relay Option 82 - Per Interface Support
Yes
Yes
Yes
No
Fast EtherChannel
Yes
Yes
Yes
Yes
FHRP - Object Tracking List
Yes
Yes
Yes
No
Gigabit EtherChannel
Yes
Yes
Yes
Yes
ICMP Unreachable Rate Limiting User Feedback
Yes
Yes
Yes
No
IEEE 802.1p Support
Yes
Yes
No
Yes
IP SLAs Features
Yes
Yes
Yes
No
IPv6 MIBs
Yes
Yes
Yes
No
Modular QoS CLI-Based Classification for Layer 2 Frames in PXF
Yes
Yes
No
Yes
•
LSP Ping/Traceroute for LDPYes
Yes
Yes
No
•
MPLS Multipath LSP TracerouteYes
Yes
Yes
No
•
Yes
Yes
Yes
No
•
Yes
Yes
Yes
No
Multicast VPN Extranet Support
No
No
Yes
No
Multicast VPN Inter-AS Support
Yes
Yes
Yes
No
NAT - Integration with MPLS VPNs
Yes
Yes
Yes
Yes
•
No
No
Yes
No
•
Yes
Yes
No
No
•
Yes
Yes
Yes
No
•
Yes
Yes
Yes
No
•
and OSPFv3Yes
Yes
Yes
No
•
ExtensionsYes
Yes
Yes
No
•
Yes
Yes
Yes
No
•
OSPFv2 and OSPFv3 Data FieldsYes
Yes
Yes
No
Per-VRF Assignment of BGP Router ID
Yes
Yes
Yes
No
QoS: CBQoS Management - Policy-to-Interface Mapping Support
Yes
Yes
Yes
No
QoS: CBQoS MIB Index Enhancements
Yes
Yes
Yes
No
Rate-Based Satellite Control Protocol (RBSCP)
Yes
Yes
Yes
No
SFP Security Verification
Yes
Yes
Yes
No
SNMP - Session to Interface Mapping Improvements
Yes
Yes
Yes
No
SSO-GLBP
No
No
Yes
No
Transmission Control Protocol Features
Yes
Yes
Yes
No
Turbo ACL Scalability Enhancements (Phase II)
Yes
Yes
No
Not applicable1
VRF-Aware System Message Logging (Syslog)
Yes
Yes
Yes
No
1 The Turbo ACL Scalability Enhancements (Phase II) feature consists of an internal enhancement that accelerates the removal of memory within the PXF path and a functionality that sets memory limits on the Route Processor (RP) path.
802.1p COS Bit Set for PPP and PPPoE Control Frames
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb8021p2.html
AAA High Availability Support for Local PPPoX Sessions
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_aaaha.html
BGP Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Border Gateway Protocol (BGP) features.
BGP MIB Support Enhancements
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fs_bmibe.html
BGP Multicast Inter-AS (IAS) VPN
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/cs_bmiav.html
BGP Selective Address Tracking
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbgpsn.html
BGP Support for Fast Peering Session Deactivation
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbsfda.html
BGP Support for Next-Hop Address Tracking
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbnhop.html
BGP Support for TCP Path MTU Discovery per Session
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbgpmtu.html
Calling Station ID Attribute 31
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
The radius-server attribute 31 command is a new command in Cisco IOS Release 12.2(31)SB2. This new command replaces the radius-server attribute 31 remote-id command, which was first introduced in Release 12.2(28)SB. The new command adds two new keywords, mac and send, and includes the remote-id keyword from the original radius-server attribute 31 remote-id command.
Cisco Express Forwarding - SNMP CEF-MIB Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbcefmib.html
Cisco MIBs
Cisco IOS Release 12.2(31)SB2 and later releases support the following Cisco MIBs.
CISCO-IP-URPF-MIB Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sburpmib.html
CISCO-NETFLOW-MIB
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco documents:
•
http://www.cisco.com/en/US/docs/routers/7200/technical_references/7200_mib_guides/7200_mib_specs_guide_v3/7200mib3.html
•
http://www.cisco.com/en/US/docs/routers/7300/technical_references/7301_mib_guides/7301_mib_specs_guide_v3/7301mib1.html
•
http://www.cisco.com/en/US/docs/routers/7300/technical_references/7304_mib_guides/7304_mib_specs_guide_v2/7304mib.html
•
http://www.cisco.com/en/US/docs/routers/10000/10008/technical_references/mibs/guides/broadband/mib_guide_ver4a/bbgv4a.html
CISCO-QINQ-VLAN-MIB
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco 10000 Series Router Broadband MIB Specifications Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/technical_references/mibs/guides/broadband/mib_guide_ver4a/bbgv4a.html
Class Based Ethernet CoS Matching & Marking (802.1p & ISL CoS)
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following chapters in the Cisco 10000 Series Router Quality of Service Configuration Guide:
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qclass.html
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qmark.html
Clear IP Traffic CLI
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbipclip.html
CNS Image Agent
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_cnsia.html
Configuration Replace and Configuration Rollback
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/gtrollbk.htm
Control Plane Policing (CPP)
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/copp.htm
Control Plane Policing—Time Based
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/copp.htm
DHCP Relay Option 82 per Interface Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the DHCP Option 82 per Interface Support document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t6/htdhopt8.htm
Dynamic Bandwidth Selection—ATM VC Weights Attribute Specification
Platform: Cisco 10000 series (PRE-2 and PRE-3)
The Dynamic Bandwidth Selection—ATM VC Weights Attribute Specification feature enables broadband customers to configure session bandwidth dynamically. The Cisco 10000 series router offers a dynamic quality of service (QoS) model that enables you to download QoS parameters from a RADIUS server to an ATM virtual circuit (VC).
This feature enables wholesale service providers to sell different levels of service to retail service providers, based on the bandwidth of the ATM VC connection. The retail service provider can then offer subscribers the ability to choose services with varying levels of bandwidth allocation. If a subscriber changes services, the service provider can dynamically change the ATM shaping on the VC based on the RADIUS profile of the subscriber. RADIUS accounting mechanisms control billing for the different services. An extension to Dynamic Bandwidth Selection (DBS) provides the ability to modify an existing VC weight and watermark values using a RADIUS pull model in which the subscriber triggers the parameter changes. The DBS Extensions—VC Weight and Watermark feature enables the modification of existing VC weight and watermark values without tearing down and recreating the VC.
On a RADIUS server, this feature allows VC weight and watermark parameters to be applied (through RADIUS pull) and installed or modified by specific events (through RADIUS push) while the session remains active. Any changes to these VC parameters configured using the Modular QoS CLI (MQC) affect only the NVGEN values and not the RADIUS-pulled values.
For detailed information about this feature, see the following chapters in the Cisco 10000 Series Router Quality of Service Configuration Guide:
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qrad.html
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qbwdth.html
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qshape.html
Fast EtherChannel and Gigabit EtherChannel Features
The following Fast EtherChannel (FEC) and Gigabit EtherChannel (GEC) features are supported in Cisco IOS Release 12.2(31)SB2.
Fast EtherChannel
Platform: Cisco 7304
This Fast EtherChannel (FEC) feature introduces Fast EtherChannel support for the Cisco 7304 router. This support is introduced for a Cisco 7304 router that uses an NSE-100, NSE-150, or NPE-G100. Fast EtherChannel bundles are PXF-accelerated for the NSE-100 and the NSE-150.
Additionally, PXF-acceleration for QoS rate limiting of Fast EtherChannel bundles is also introduced as part of this feature. Because this portion of the feature is PXF-related, it applies only to the NSE-100 and the NSE-150.
For additional information about Fast EtherChannels on the Cisco 7304 router, see Cisco 7304 Router Fast EtherChannel and Gigabit EtherChannel Notes:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/7304swf/7304eth.htm
For additional information about PXF, see the PXF Information for the Cisco 7304 Router document:
http://www.cisco.com/en/US/docs/routers/7300/maintain_and_operate_guides/7304_maintain_and_operate_guides/7304pxf.html
Gigabit EtherChannel
Platform: Cisco 7304
This Gigabit EtherChannel (GEC) feature introduces Gigabit EtherChannel support for the Cisco 7304 router. This support is introduced for a Cisco 7304 router that uses an NSE-100, NSE-150, or NPE-G100. Gigabit EtherChannel bundles are PXF-accelerated for the NSE-100 and the NSE-150.
Additionally, PXF-acceleration for QoS rate limiting of Gigabit EtherChannel bundles is also introduced as part of this feature. Because this portion of the feature is PXF-related, it applies only to the NSE-100 and the NSE-150.
For additional information about Gigabit EtherChannels on the Cisco 7304 router, see Cisco 7304 Router Fast EtherChannel and Gigabit EtherChannel Notes:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/7304swf/7304eth.htm
For additional information about PXF, see the PXF Information for the Cisco 7304 Router document:
http://www.cisco.com/en/US/docs/routers/7300/maintain_and_operate_guides/7304_maintain_and_operate_guides/7304pxf.html
Link Aggregation Control Protocol (LACP) (802.3ad) for Gigabit Interfaces
Platform: Cisco 10000 series (PRE-2 and PRE3)
For detailed information about this feature, which for the Cisco 10000 series is also known as the Fast EtherChannel (FEC) feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/10gigeth.htm
FHRP—Object Tracking List
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_otl.html
Field-Programmable Device Upgrades
Platform: Cisco 7200 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124limit/124x/124xd4/
fpd.htmFrame Relay - Multilink (MLFR-FRF.16)
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the Multilink Frame Relay (FRF.16) document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
fs_mfr.htmHTTP 1.1 Web Server and Client
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sb_http1.htm
ICMP Unreachable Rate Limiting User Feedback
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the Configuring IP Services document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbipicmp.html
IEEE 802.1p Support
Platform: Cisco 7304
The IEEE 802.1p Support feature introduces IEEE 801.p support, which is also referred to as Class of Service (CoS) Value Marking in some Cisco documentation, in the PXF processing path for a Cisco 7304 router that uses an NSE-100 or an NSE-150.
Marking a packet with a local CoS value enables users to associate a Layer 2 CoS value with a packet. The value can then be used to classify packets based on user-defined requirements. Layer 2 to Layer 3 mapping can also be configured by matching on the CoS value, because switches already have the capability to match and set CoS values. If a packet that needs to be marked to differentiate user-defined quality of service (QoS) services is leaving a router and entering a switch, the router should set the CoS value of the packet, because the switch can process the Layer 2 CoS header marking.
There are two ways to configure marking of packets using the CoS value. The first method is configuring the set cos command in the Modular QoS CLI and marking CoS values based on user-defined criteria. The second method is using the set-cos-transmit option in the police command.
For additional information about IEEE 802.1p, see the Class-Based Marking document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/cbpmark2.htm
For additional information about PXF, see the PXF Information for the Cisco 7304 Router document:
http://www.cisco.com/en/US/docs/routers/7300/maintain_and_operate_guides/7304_maintain_and_operate_guides/7304pxf.html
IEEE 802.3ad, Link Aggregation Control Protocol
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the IEEE 802.3ad Link Bundling document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbcelacp.htm
In-Service Software Upgrade Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following In-Service Software Upgrade (ISSU) features.
ISSU - DHCP Features
Platform: Cisco 10000 series (PRE-2 and PRE-3)
Cisco IOS Release 12.2(31)SB2 and later releases support the following ISSU - Dynamic Host Configuration Protocol (DHCP) features.
•
•
•
•
For detailed information about this feature, see the ISSU and SSO—DHCP High Availability Features document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbdhcpha.htm
ISSU - GLBP
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/glbpissu.html
ISSU - IS-IS
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbisissu.htm
ISSU - PPPoA
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco IOS Broadband High Availability In-Service Software Upgrade document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbissubb.htm
ISSU - PPPoE
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco IOS Broadband High Availability In-Service Software Upgrade document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbissubb.htm
ISSU - Remote Access to MPLS VPN
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco IOS Broadband High Availability In-Service Software Upgrade document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbissubb.htm
Intelligent Service Gateway Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Intelligent Service Gateway (ISG) features:
•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)
Note
•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platforms: Cisco 7200 series, Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platforms: Cisco 7200 series, Cisco 7301•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)•
Platform: Cisco 10000 series (PRE-2 and PRE-3)For detailed information about these features, see the following Cisco documents:
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cg/isg_lib/isg_c/index.htm
•
http://www.cisco.com/en/US/products/ps6566/prod_command_reference_list.html
IP Options Selective Drop
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the "Protecting the Router from DoS Attacks" chapter in the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/overview.html
IP SLAs Features
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
Cisco IOS IP SLAs features provide the capability to verify service guarantees, increase network reliability by validating network performance, proactively identify and alert users about network issues or deviations, and increase Return on Investment (ROI) by easing the deployment of new IP services. Cisco IOS IP SLAs use active probing techniques for end-to-end quantitative measurement of network performance, health, and connectivity for Voice over IP (VoIP), Multiprotocol Label Switching (MPLS), and TCP/IP networks. The IP SLAs features are also directly integrated with other Cisco IOS products such as Optimized Edge Routing (OER), Enhanced Object Tracker (EoT), and Embedded Event Manager (EEM).
Cisco IOS Release 12.2(31)SB2 and later releases support the following IP SLAs features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For detailed information about the IP SLAs - LSP Health Monitor with LSP Discovery feature, see the following document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sb2pdisc.htm
All other Cisco IOS IP SLAs configuration information is included in the Cisco IOS IP SLAs Configuration Guide, Release 12.4:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsla_c/index.htm
Cisco IOS IP SLAs command reference information is included in the Cisco IOS IP SLAs Command Reference, Release 12.2SB:
http://www.cisco.com/en/US/products/ps6566/prod_command_reference_list.html
IPv6 Hardware: PxF Accelerated for IPv6 over MPLS (6PE)
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco 10008 Router Performance Routing Engine 3 Installation document:
http://www.cisco.com/en/US/docs/routers/10000/10008/install_and_upgrade/pre_installation/pre3_guide/pre3ins.html
IPv6 MIBs
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the "MIBs" section in the "Implementing IPv6 Addressing and Basic Connectivity" chapter of the Cisco IOS IPv6 Configuration Library:
http://www.cisco.com/en/US/docs/ios/12_2t/ipv6/ipv6_vgf.html
IS-IS MIB
Platform: Cisco 7200 series
For detailed information about this feature, see the IS-IS MIB Support document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122sg25/
ismibspt.htmL2VPN Interworking: Ethernet to VLAN Interworking
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the "Configuring Any Transport over MPLS" chapter of the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/overview.html
Lawful Intercept Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Lawful Intercept features.
Lawful Intercept Enhancements
Platform: Cisco 10000 series (PRE-2 and PRE-3)
In addition to support for the Lawful Intercept feature on the PRE-3, the following enhancements are introduced for the Lawful Intercept feature in Cisco IOS Release 12.2(31)SB2:
•
•
•
•
For detailed information about the Lawful Intercept feature, see the Cisco 10000 Series Router Lawful Intercept Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/feature/guides/lawful_intercept/10LIprf.html
Service Independent Intercept Architecture: SNMP-Based Lawful Intercept
Platforms: Cisco 7200 series, Cisco 7301
Note
Note
SNMP-Based Lawful Intercept, which is a Layer 3 feature (that is, a feature at the IP level), is based on SNMPv3. The following MIBs are supported for SNMP-Based Lawful Intercept:
•
•
•
For detailed information about the Service Independent Intercept (SII) architecture, see the Service Independent Intercept document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/ht_ssi.htm
Layer 2 Tunnel Protocol Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Layer 2 Tunnel Protocol (L2TP) features.
L2TP Calling Station ID Suppression
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/callstub.htm
L2TP Domain Screening
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/domstub.htm
L2TP Tunnel Selection Load Balancing with Random Algorithm
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/selstub.htm
MPLS Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Multiprotocol Label Switching (MPLS) features.
MPLS Embedded Management - LSP Ping/Traceroute for LDP
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t6/ht_lspng.htm
MPLS Embedded Management - MPLS Multipath LSP Traceroute
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sb_mmtr.htm
MPLS Traffic Engineering (TE) MIB
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
Note
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
temib2.htmMPLS VPN MIB v05 - Trap Enhancements
Platforms: Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
Note
For detailed information about this feature, see the MPLS VPN—MIB Support document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s25/
fsvnmb25.htmMPLS VPN - VRF Selection Based on Source IP Address
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122sz/12214sz/
122szvrf.htmMQC Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Modular QoS CLI (MQC) features.
Modular QoS CLI-Based Classification for Layer 2 Frames in PXF
Platform: Cisco 7304
The Modular QoS CLI-Based Classification for Layer 2 Frames in PXF feature enables Parallel eXpress Forwarding (PXF) acceleration of various match commands in the Modular QoS CLI (MQC) to classify Layer 2 packets for Cisco 7304 routers that use an NSE-100 or an NSE-150.
Specifically, classification of the matching of the following packets is PXF-accelerated as a result of this feature:
•
•
•
•
•
For more information, see the following documents:
•
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfmcli2.html
•
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_book.html
•
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/aggvlan.html
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/12stnlmk.htm#wp1100535•
http://www.cisco.com/en/US/docs/routers/7300/maintain_and_operate_guides/7304_maintain_and_operate_guides/7304pxf.html
MQC - Distribution of Remaining Bandwidth via Ratio
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the Distribution of Remaining Bandwidth Using Ratio document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/bwratio.htm
MQC - Hierarchical Queuing with 3 Level Scheduler
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/3lvlschd.htm
MQC - Multi-Level Priority Queues
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/mpq.htm
MQC - Traffic Shaping Overhead Accounting for ATM
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/ovrhactg.htm
Multicast VPN
Cisco IOS Release 12.2(31)SB2 and later releases support the following multicast Virtual Private Network (VPN) features.
Multicast VPN Extranet Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Configuring Multicast VPN Extranet Support document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/extvpnsb.htm
Multicast VPN Extranet VRF Select
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbmexsel.htm
Multicast VPN Inter-AS Support
Platforms: Cisco 7200 series, Cisco 7304
For detailed information about this feature, see the Configuring Multicast VPN Inter-AS Support document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s30/
iasmcvpn.htmMulticlass Multilink PPP Enhancement
Platform: Cisco 10000 series (PRE-2)
Prior to Cisco IOS Release 12.2(31)SB2, the Multiclass Multilink PPP (MC-MLP) feature provided support for 16 reassembly classes by the receive logic, but only 2 classes were supported for transmit logic. Beginning with Cisco IOS Release 12.2(31)SB2, MC-MLP provides expanded support to include 4 classes for transmit logic on the Cisco 10000 series.
For detailed information about Multiclass Multilink PPP feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/mcmlp.htm
NAS-Port ID Format C Enhancement
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/nas_id_c.htm
NAT - Integration with MPLS VPNs
Platform: Cisco 7304
The NAT - Integration with MPLS VPNs feature functions for a Cisco 7304 router that uses an NSE-100, NSE-150, or NPE-G100. The NAT - Integration with MPLS VPNs feature is PXF-accelerated on a Cisco 7304 router that uses an NSE-100 or NSE-150.
Network Address Translation (NAT) allows a single device, such as a router, to act as an agent between the Internet (or public network) and a local (or private) network. Although NAT systems can provide broad levels of security advantages, their main objective is to economize on address space.
NAT allows organizations to resolve the problem of IP address depletion when they have existing networks and need to access the Internet. Sites that do not yet possess network interface card (NIC)-registered IP addresses must acquire them. Cisco IOS NAT eliminates concern and bureaucratic delay by dynamically mapping thousands of hidden internal addresses to a range of easy-to-get addresses.
In general, a NAT system makes it more difficult for an attacker to determine the following:
•
•
•
NAT integration with Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs) allows multiple MPLS VPNs to be configured on a single device to work together. NAT can differentiate which MPLS VPN it receives IP traffic from even if the MPLS VPNs are all using the same IP addressing scheme. This enables multiple MPLS VPN customers to share services while ensuring that each MPLS VPN is completely separate from the other.
For additional information on this feature, see the NAT Integration with MPLS VPNs document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftnatvpn.htm
For additional information about PXF, see the PXF Information for the Cisco 7304 Router document:
http://www.cisco.com/en/US/docs/routers/7300/maintain_and_operate_guides/7304_maintain_and_operate_guides/7304pxf.html
NetFlow Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following NetFlow features.
Flexible NetFlow
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbfnf.htm
NetFlow Egress Accounting
Platform: Cisco 7304
The NetFlow Egress Accounting feature introduces egress NetFlow accounting in the Parallel eXpress Forwarding (PXF) processing path for a Cisco 7304 router that uses an NSE-100 or NSE-150.
The NetFlow Egress Accounting feature enables you to capture IP flow information for packets that undergo Multiprotocol Label Switching (MPLS) label disposition; that is, packets that arrive on a router as MPLS packets and are transmitted as IP packets. It also allows the router to capture IP information for packets that arrive on a router as IP packets and leave that router as an IP packet.
This feature enables service providers to compute MPLS core traffic matrices and better manage network traffic patterns.
For more information, see the following documents:
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/
egress.htm•
http://www.cisco.com/en/US/docs/routers/7300/maintain_and_operate_guides/7304_maintain_and_operate_guides/7304pxf.html
NetFlow Export of BGP Nexthop Information
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbnfbgpp.htm
NetFlow MPLS Aggregation
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, which is also known for the Cisco 10000 series as the MPLS PE-to-PE Traffic Statistics for NetFlow feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbmplspp.htm
Random Sampled NetFlow
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbrsnf.htm
OSPF Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Open Shortest Path First (OSPF) features.
NSF-OSPF RFC 3623 Graceful Restart
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s32/
gr_ospf.htmOSPF Enhanced Traffic Statistics for OSPFv2 and OSPFv3
Platforms: Cisco 7200 series, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t6/htostats.htm
OSPF MIB Support of RFC 1850 and Latest Extensions
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a00804eb09a.html
OSPF Sham-Link MIB Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s30/
ospfslms.htmOSPF SNMP ifIndex Value for Interface ID in OSPFv2 and OSPFv3 Data Fields
Platforms: Cisco 7200 series, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t6/ht_ifndx.htm
Persistent Storage
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the Stateful Switchover document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s20/
fssso20s.htmPer-VRF Assignment of BGP Router ID
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/newft/122sra33/srbgprid.htm
PPP-Max-Payload and IWF PPPoE Tag Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/pppmpiwf.htm
PPPoE Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following PPP over Ethernet (PPPoE) features.
PPPoE Agent Remote ID & DSL Line Characteristics Enhancement
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/rmt_dsl.htm
PPPoE QinQ Support
Platforms: Cisco 7200 series, Cisco 10000 series (PRE-2 and PRE-3)
Note
For detailed information about this feature, which is also known as the IEEE 802.1Q-in-Q VLAN Tag Termination feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/gt_qinq.htm
PPPoE Session Limiting on Inner QinQ VLAN
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbseslt2.htm
PXF-Based Frame Relay DE Bit Marking
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/ios_xe/qos/configuration/guide/mrkg_netwk_traffic_xe.html
QoS Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following quality of service (QoS) features.
QoS: CBQoS Management - Policy-to-Interface Mapping Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/cbqosmap.htm
QoS: CBQoS MIB Index Enhancements
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, which may be known also as the CBQOSMIB Index Persistency feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t4/ht_cbqos.htm
QoS Child Service Policy for Priority Class
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/chldprio.htm
QoS: Classification, Policing, and Marking on LAC
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the following chapters in the Cisco 10000 Series Router Quality of Service Configuration Guide:
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qclass.html
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qpolce.html
•
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qmark.html
QoS - Hierarchical Queuing for Ethernet DSLAMs
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/10edslam.htm
QoS: Match VLAN
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/ht_mvlan.htm
QoS - Percentage-Based Shaping
Platform: Cisco 10000 series (PRE-2 and PRE-3)
Note
For detailed information about this feature, see the "Shaping Traffic" chapter of the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qshape.html
QoS - Policing Support for GRE Tunnels
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/grepol.htm
QoS Priority Propagation in Multi-level Scheduler
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the MQC Hierarchical Queuing with 3 Level Scheduler document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/3lvlschd.htm
QoS - VLAN Tag Based
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/vlntgqos.htm
RADIUS Logical Line ID
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, which is also known as the LLID Blocking feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftlineid.htm
Rate-Based Satellite Control Protocol (RBSCP)
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the RBSCP (Rate Based Satellite Control Protocol) document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbrbscp.htm
Routed Bridge Encapsulation with ATM Virtual Circuit Bundles
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t4/htrbeatm.htm
SFP Security Verification
Platforms: Cisco 7200 series, Cisco 7304
Cisco IOS Release 12.2(31)SB2 supports the SFP Security Verification feature in Cisco transceivers (Gigabit Interface Converters [GBICs] or small form-factor pluggable [SFP]) converters). (This feature is also known as the Cisco Quality ID feature.)
The SFP Security Verification feature primarily consists of the following components:
•
•
SNMP - Session to Interface Mapping Improvements
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the "CISCO-AAA-SESSION-MIB" section in the following Cisco documents:
•
http://www.cisco.com/en/US/docs/routers/7200/technical_references/7200_mib_guides/7200_mib_specs_guide_v3/7200mib3_1.html
•
http://www.cisco.com/en/US/docs/routers/7300/technical_references/7301_mib_guides/7301_mib_specs_guide_v3/7301mib3_1.html
•
http://www.cisco.com/en/US/docs/routers/7300/technical_references/7304_mib_guides/7304_mib_specs_guide_v2/7304mib.html
•
http://www.cisco.com/en/US/docs/routers/10000/10008/technical_references/mibs/guides/broadband/mib_guide_ver4a/bbgv4a.html
SNMP Support for VPNs
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the SNMP Support over VPNs—Context-Based Access Control document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_2/
gtsnmpvp.htmStateful Switchover Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Stateful Switchover (SSO) features.
SSO - DHCP ODAP Client/Server
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the ISSU and SSO—DHCP High Availability Features document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbdhcpha.htm
SSO - DHCP Proxy Client
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the ISSU and SSO—DHCP High Availability Features document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbdhcpha.htm
SSO - DHCP Relay on Unnumbered Interface
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the ISSU and SSO—DHCP High Availability Features document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbdhcpha.htm
SSO - DHCP Server
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the ISSU and SSO—DHCP High Availability Features document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbdhcpha.htm
SSO - GLBP
Platforms: Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sglbpsso.html
SSO - Multilink Frame Relay
Platform: Cisco 10000 series (PRE-3)
For detailed information about this feature, see the Stateful Switchover document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s20/
fssso20s.htmSSO - PPPoA
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco IOS Broadband High Availability Stateful Switchover document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbssobb.htm
SSO - PPPoE
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco IOS Broadband High Availability Stateful Switchover document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbssobb.htm
SSO - Remote Access to MPLS VPN
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the Cisco IOS Broadband High Availability Stateful Switchover document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbssobb.htm
Static MAC Address for PPPoE
Platform: Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the "Static MAC Address for PPPoE" section in the "Configuring PPPoE over Ethernet and IEEE 802.1Q VLAN" chapter of the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/vlan.html
Transmission Control Protocol Features
Cisco IOS Release 12.2(31)SB2 and later releases support the following Transmission Control Protocol (TCP) features.
TCP Application Flags Enhancement
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbtcpafl.htm
TCP - Explicit Congestion Notification
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbtcpecn.htm
TCP Show Extension
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbtcpse.htm
TCP Window Scaling
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbtcpwin.htm
Turbo ACL Scalability Enhancements (Phase II)
Platform: Cisco 7304
The Turbo ACL Scalability Enhancements (Phase II) feature improves processing of access control lists (ACLs) for a Cisco 7304 router that uses an NSE-100 or NSE-150.
These enhancements improve processing of all Parallel eXpress Forwarding (PXF) traffic on a Cisco 7304 router that uses a network services engine (NSE) by more efficiently processing traffic that requires Turbo ACL classification in the PXF processing path. This feature also introduces user-configuration options that allow users to define the amount of memory used for Turbo ACL purposes in the Route Processor (RP) processing path.
For additional information on this feature, see Turbo Access Control List Scalability Enhancements document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbtaclse.htm
VPDN Debug Output
Platforms: Cisco 7200 series, Cisco 7301
The VPDN Debug Outputs feature enhances the debug vpdn 12x-packets command to decode both inbound and outbound Layer 2 Tunneling Protocol (L2TP) hexadecimal control packets for each L2TP Access Controller (LAC) or L2TP Network Server (LNS). In releases earlier than Cisco IOS Release 12.2(31)SB2, the debug vpdn 12x-packets command decoded only incoming L2TP hexadecimal control packets. With Cisco IOS Release 12.2(31)SB2 or later releases, in addition to decoding outbound control packets, the debug vpdn 12x-packets command decodes information regarding tunnel and session setup and teardown, Zero-Length Body (ZLB) packets, and attribute-value (AV) pairs. This feature also improves the readability of debug output.
You can debug outbound L2TP hexadecimal control packets by using the debug vpdn 12x-packets command in privileged EXEC mode.
The following example shows the debug vpdn 12x-packets command output with outbound debug output highlighted in bold:
3d22h: %LINK-3-UPDOWN: Interface Serial3/0, changed state to up3d22h: Tnl 29029 L2TP: O SCCRQ3d22h: Tnl 29029 L2TP: Parse AVP 0, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Parse SCCRQ3d22h: Tnl 29029 L2TP: Parse AVP 2, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Protocol Ver 2563d22h: Tnl 29029 L2TP: Parse AVP 6, len 8, flag 0x03d22h: Tnl 29029 L2TP: Firmware Ver 0x11303d22h: Tnl 29029 L2TP: Parse AVP 7, len 16, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Hostname LAC-tunnel3d22h: Tnl 29029 L2TP: Parse AVP 8, len 25, flag 0x03d22h: Tnl 29029 L2TP: Vendor Name Cisco Systems, Inc.3d22h: Tnl 29029 L2TP: Parse AVP 10, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Rx Window Size 200503d22h: Tnl 29029 L2TP: Parse AVP 11, len 22, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: ChlngB1 E9 3B 84 72 66 19 B1 C5 46 8F E7 31 A8 3B BC3d22h: Tnl 29029 L2TP: Parse AVP 9, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Assigned Tunnel ID 290293d22h: Tnl 29029 L2TP: Parse AVP 3, len 10, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Framing Cap 0x03d22h: Tnl 29029 L2TP: Parse AVP 4, len 10, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Bearer Cap 0x03d22h: Tnl 29029 L2TP: Parse Cisco AVP 110, len 6, flag 0x03d22h: Tnl 29029 L2TP: PPPoE Relay Forward Capable3d22h: Tnl 29029 L2TP: O SCCRQ, flg TLS, ver 2, len 141, tnl 0, ns 0, nr 0C8 02 00 8D 00 00 00 00 00 00 00 00 80 08 00 00C8 02 00 8D 00 00 00 00 00 00 00 00 80 08 00 0000 00 00 01 80 08 00 00 00 02 01 00 00 08 00 0000 06 11 30 80 10 00 00 00 07 4C 41 43 2D 74 756E 6E 65 6C 00 19 00 00 00 08 43 69 73 63 6F 2053 79 73 74 65 6D 73 ...3d22h: Tnl 29029 L2TP: Parse AVP 0, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Parse SCCRP3d22h: Tnl 29029 L2TP: Parse AVP 2, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Protocol Ver 2563d22h: Tnl 29029 L2TP: Parse AVP 6, len 8, flag 0x03d22h: Tnl 29029 L2TP: Firmware Ver 0x11203d22h: Tnl 29029 L2TP: Parse AVP 7, len 16, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Hostname LNS-tunnel3d22h: Tnl 29029 L2TP: Parse AVP 8, len 25, flag 0x03d22h: Tnl 29029 L2TP: Vendor Name Cisco Systems, Inc.3d22h: Tnl 29029 L2TP: Parse AVP 10, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Rx Window Size 200503d22h: Tnl 29029 L2TP: Parse AVP 11, len 22, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Chlng7F 8B 30 8C 1D CD 44 49 CA 71 C3 6F 45 C2 89 B13d22h: Tnl 29029 L2TP: Parse AVP 13, len 22, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Chlng RespC3 A8 1B 39 6B 42 82 A5 AC A1 11 36 94 97 A2 1D3d22h: Tnl 29029 L2TP: Parse AVP 9, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Assigned Tunnel ID 185663d22h: Tnl 29029 L2TP: Parse AVP 3, len 10, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Framing Cap 0x03d22h: Tnl 29029 L2TP: Parse AVP 4, len 10, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Bearer Cap 0x03d22h: Tnl 29029 L2TP: Parse Cisco AVP 110, len 6, flag 0x03d22h: Tnl 29029 L2TP: PPPoE Relay Forward Capable3d22h: Tnl 29029 L2TP: No missing AVPs in SCCRP3d22h: Tnl 29029 L2TP: I SCCRP, flg TLS, ver 2, len 163, tnl 29029, ns 0, nr 1contiguous pak, size 163C8 02 00 A3 71 65 00 00 00 00 00 01 80 08 00 0000 00 00 02 80 08 00 00 00 02 01 00 00 08 00 0000 06 11 20 80 10 00 00 00 07 4C 4E 53 2D 74 756E 6E 65 6C 00 19 00 00 00 08 43 69 73 63 6F 2053 79 73 74 65 6D 73 2C ...3d22h: Tnl 29029 L2TP: I SCCRP from LNS-tunnel3d22h: Tnl 29029 L2TP: O SCCCN to LNS-tunnel tnlid 185663d22h: Tnl 29029 L2TP: Parse AVP 0, len 8, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Parse SCCCN3d22h: Tnl 29029 L2TP: Parse AVP 13, len 22, flag 0x8000 (M)3d22h: Tnl 29029 L2TP: Chlng Resp3B 74 77 E8 DD 30 64 48 C2 63 42 D5 37 C3 B9 F23d22h: Tnl 29029 L2TP: O SCCCN, flg TLS, ver 2, len 42, tnl 18566, ns 1, nr 1C8 02 00 2A 48 86 00 00 00 01 00 01 80 08 00 0000 00 00 03 80 16 00 00 00 0D 3B 74 77 E8 DD 3064 48 C2 63 42 D5 37 C3 B9 F23d22h: Se3/0 Tnl/Sn 29029/61 L2TP: O ICRQ to LNS-tunnel 18566/03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 0, len 8, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse ICRQ3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 15, len 10, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Serial Number 15632000073d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 14, len 8, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Assigned Call ID 613d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 18, len 10, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Bearer Type 23d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse Cisco AVP 100, len 15, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Client NAS Port53 65 72 69 61 6C 33 2F 303d22h: Se3/0 Tnl/Sn 29029/61 L2TP: O ICRQ, flg TLS, ver 2, len 63, tnl 18566,lsid 61, rsid 0, ns 2, nr 1C8 02 00 3F 48 86 00 00 00 02 00 01 80 08 00 0000 00 00 0A 80 0A 00 00 00 0F 5D 2C 8A 07 80 0800 00 00 0E 00 3D 80 0A 00 00 00 12 00 00 00 0200 0F 00 09 00 64 53 65 72 69 61 6C 33 2F 303d22h: Tnl 29029 L2TP: I ZLB ctrl ack, flg TLS, ver 2, len 12, tnl 29029, ns1, nr 23d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 0, len 8, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse ICRP3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 14, len 8, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Assigned Call ID 93d22h: Se3/0 Tnl/Sn 29029/61 L2TP: No missing AVPs in ICRP3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: I ICRP, flg TLS, ver 2, len 28, tnl 29029,lsid 61, rsid 0, ns 1, nr 3contiguous pak, size 28C8 02 00 1C 71 65 00 3D 00 01 00 03 80 08 00 0000 00 00 0B 80 08 00 00 00 0E 00 093d22h: Se3/0 Tnl/Sn 29029/61 L2TP: O ICCN to LNS-tunnel 18566/93d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 0, len 8, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse ICCN3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 24, len 10, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Connect Speed 15440003d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 19, len 10, flag 0x8000 (M)3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Framing Type 13d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 27, len 17, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Last Sent LCPREQ03 05 C2 23 05 05 06 1D 9C 69 093d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 28, len 12, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Last Rx LCPREQ05 06 1F 19 E3 073d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 31, len 22, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Proxy Auth ChalFF 0D CB C7 E4 07 74 9F 43 0C 82 B5 17 69 4D 9E3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 32, len 8, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Proxy Auth ID 603d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 30, len 22, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Proxy Auth Name client@cisco.com3d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 33, len 22, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Proxy Auth Resp80 45 E2 C5 A7 D0 8C C1 0F 0A 14 F8 9E F7 21 F33d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Parse AVP 29, len 8, flag 0x03d22h: Se3/0 Tnl/Sn 29029/61 L2TP: Proxy Auth Type 23d22h: Se3/0 Tnl/Sn 29029/61 L2TP: O ICCN, flg TLS, ver 2, len 151, tnl 18566,lsid 61, rsid 9, ns 3, nr 2C8 02 00 97 48 86 00 09 00 03 00 02 80 08 00 0000 00 00 0C 80 0A 00 00 00 18 00 17 8F 40 80 0A00 00 00 13 00 00 00 01 00 11 00 00 00 1B 03 05C2 23 05 05 06 1D 9C 69 09 00 0C 00 00 00 1C 0506 1F 19 E3 07 00 16 ...3d22h: Tnl 29029 L2TP: I ZLB ctrl ack, flg TLS, ver 2, len 12, tnl 29029, ns 2, nr 43d22h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to upFor more information about the debug vpdn 12x-packets command, see the Cisco IOS Debug Command Reference:
http://www.cisco.com/en/US/docs/ios/debug/command/reference/db_book.html
VRF-Aware System Message Logging (Syslog)
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series (PRE-2 and PRE-3)
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/newft/122sra33/srvrfslg.htm
VRF-Aware VPDN Tunnels
Platform: Cisco 10000 series (PRE-2 and PRE-3)
Note
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbvpdnmh.htm
Weighted Random Early Detection Improvements
Platform: Cisco 10000 series (PRE-2 and PRE-3)
Cisco IOS Release 12.2(31)SB2 contains the following Weighted Random Early Detection (WRED) improvements for the Performance Routing Engine 3 (PRE-3):
•
•
•
Improvements have also been made in the collection of statistical information for WRED and other quality of service (QoS) features. Instead of polling for statistics, the PRE-3 transfers statistical data to the Route Processor (RP) on-demand every 10 seconds. As a result, statistics can be collected more quickly and with a significant improvement in memory requirements.
For more information about WRED improvements, see the "Managing Packet Queue Congestion" chapter in the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qqueue.html
New Hardware Features in Cisco IOS Release 12.2(28)SB6
This section describes new and changed features in Cisco IOS Release 12.2(28)SB6. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(28)SB6. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
1-Port Packet over SONET OC3c/STM1 Port Adapter
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about the 1-port Packet over SONET OC3c/STM1 port adapter (PA-POS-1OC3), see the following documents:
•
http://www.cisco.com/en/US/prod/collateral/routers/ps341/product_data_sheet0900aecd80221d3d.html
•
http://www.cisco.com/univercd/cc/td/doc/product/core/7301/73pa/73-son/6514_1oc/index.htm
New Software Features in Cisco IOS Release 12.2(28)SB6
This section describes new and changed features in Cisco IOS Release 12.2(28)SB6. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(28)SB6. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Service Independent Intercept Architecture: SNMP-Based Lawful Intercept
Platforms: Cisco 7200 series, Cisco 7301
Note
Note
SNMP-Based Lawful Intercept, which is a Layer 3 feature (that is, a feature at the IP level), is based on SNMPv3. The following MIBs are supported for SNMP-Based Lawful Intercept:
•
•
For detailed information about the Service Independent Intercept (SII) architecture, see the Service Independent Intercept document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/ht_ssi.htm
Static MAC Address for PPPoE
Platform: Cisco 10000 series
For detailed information about this feature, see the "Static MAC Address for PPPoE" section in the "Configuring PPPoE over Ethernet and IEEE 802.1Q VLAN" chapter of the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/vlan.html
New Hardware Features in Cisco IOS Release 12.2(28)SB2
This section describes new and changed features in Cisco IOS Release 12.2(28)SB2. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(28)SB2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
CWDM SFP for the 1-Port Gigabit Ethernet Half-Height Line Card
The 1-port Gigabit Ethernet half-height line card includes support for Coarse Wave Division Multiplexer (CWDM) Small Form-Factor Pluggable (SFP) laser optical transceiver modules. For more information, see the following Cisco CWDM GBIC and CWDM SFP Installation Note:
http://www.cisco.com/univercd/cc/td/doc/product/gbic_sfp/gbic_doc/78_15222.htm
New Software Features in Cisco IOS Release 12.2(28)SB2
This section describes new and changed features in Cisco IOS Release 12.2(28)SB2. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(28)SB2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Table 13 shows features that have never before been released in any public Cisco IOS software image for the Cisco 10000 series and that released for the first time for the Cisco 10000 series in Cisco IOS Release 12.2(28)SB2. Other features may be new for the Cisco 10000 series in Cisco IOS Release 12.2(28)SB2, but have been released before in other public Cisco IOS software images for the Cisco 10000 series, and are therefore not included in Table 13.
Table 13 New Features for the Cisco 10000 Series in Cisco IOS Release 12.2(28)SB2
MPLS VPN Half-Duplex VRF with Dynamic and Static PE-CE Routing
BGP Support for NonStop Routing (NSR) with Stateful Switchover (SSO)
Platform: Cisco 10000 series
For detailed information about this feature, see the following document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbb_bnsr.htm
Lawful Intercept
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/10LawInt.pdf
MPLS Traffic Engineering Features
Cisco IOS Release 12.2(28)SB2 introduces support for the following Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) features on the Cisco 10000 series.
Note
MPLS Diff-Serv-Aware Traffic Engineering (DS-TE)
Platform: Cisco 10000 series
For detailed information about this feature, see the MPLS Traffic Engineering—DiffServ Aware document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s22/
12s_dste.htmMPLS Traffic Engineering (TE)
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s23/
fs23te.htmMPLS Traffic Engineering (TE)—Automatic Bandwidth Adjustment for TE Tunnels
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
fsbandaj.htmMPLS Traffic Engineering (TE)—Configurable Path Calculation Metric for Tunnels
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
fsmetric.htmMPLS Traffic Engineering (TE)—Forwarding Adjacency
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s18/
fstefa_3.htmMPLS Traffic Engineering (TE)—Interarea Tunnels
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s18/
fsiarea3.htmMPLS Traffic Engineering (TE)—IP Explicit Address Exclusion
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftaddexc.htm
MPLS Traffic Engineering (TE) MIB
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
temib2.htmMPLS Traffic Engineering—Overload Avoidance Support for IS-IS
Platform: Cisco 10000 series
For detailed information about this feature, see the following document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s22/
fsscen.htmMPLS Traffic Engineering (TE)—Scalability Enhancements
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s22/
fsscen.htmMPLS Traffic Engineering (TE)—SNMP Notification Support
Platform: Cisco 10000 series
For detailed information about this feature, see the MPLS Traffic Engineering MIB document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
temib2.htmMPLS VPN Half-Duplex VRF with Dynamic and Static PE-CE Routing
Platform: Cisco 10000 series
For detailed information about this feature, see the MPLS VPN Half-Duplex VRF document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/hdvrfdyn.htm
NetFlow PXF Timers
Platform: Cisco 10000 series
For detailed information about this feature, see the Configuring NetFlow PXF Timers document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_npxft.htm
PPPoE QinQ Support
Platform: Cisco 10000 series
For detailed information about this feature, which is also known as the IEEE 802.1Q-in-Q VLAN Tag Termination feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/gt_qinq.htm
RSVP Refresh Reduction and Reliable Messaging
Platform: Cisco 10000 series
Note
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s29/
fsrelmsg.htmNew Hardware Features in Cisco IOS Release 12.2(28)SB
This section describes new and changed features in Cisco IOS Release 12.2(28)SB. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(28)SB. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
1-Port Enhanced ATM Port Adapter with Support for 8000 VCs
Platforms: Cisco 7200 series, Cisco 7301
Cisco IOS Release 12.2(28)SB adds support for the PA-A6 port adapters and support for 8000 virtual circuits (VCs) on the PA-A6 port adapters. The PA-A6 is a series of single-width, single-port, ATM port adapters. With advanced ATM features, the PA-A6 port adapters support broadband aggregation, WAN aggregation, and campus/MAN aggregation.
The following PA-A6 port adapters are supported:
•
•
•
•
•
For detailed information about these products, see the PA-A6 Port Adapter Installation and Configuration document:
http://www.cisco.com/univercd/cc/td/doc/product/core/7206/port_adp/atm_-pas/pa-a6/
index.htm4-Port Half-Height Channelized T3 Line Card
Platform: Cisco 10000 series
For detailed information about this product, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/line_card__software/10slct3h.html
4-Port OC-3/ATM Long-Reach Line Card
Platform: Cisco 10000 series
For detailed information about this product, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/line_card__software/lncd-sw.html
1000BASE-T GBIC Support for the Network Services Engine 100
Platform: Cisco 7304
The 1000BASE-T GBIC (WS-G5483=) is supported on Gigabit Ethernet interfaces of the Network Services Engine 100 (NSE-100).
For detailed information about this product, see the following Cisco document:
http://www.cisco.com/en/US/products/hw/modules/ps872/
products_data_sheet09186a008014cb5e.htmlCWDM GBIC Support for the Network Services Engine 100
Platform: Cisco 7304
Support for the following Coarse Wave Division Multiplexer (CWDM) Gigabit Interface Converters (GBICs) is introduced on Gigabit Ethernet ports of the Network Service Engine 100 (NSE-100):
•
•
•
•
•
•
•
•
For detailed information about these products, see the following Cisco document:
http://www.cisco.com/en/US/products/hw/modules/ps4999/
products_data_sheet09186a00801a557c.htmlCWDM SFP Support for the Network Processing Engine 100
Platform: Cisco 7304
The following Coarse Wave Division Multiplexer (CWDM) Small Form-Factor Pluggable (SFP) laser optical transceiver modules are supported on Gigabit Ethernet ports of the Network Processing Engine 100 (NPE-G100):
•
•
•
•
•
•
•
•
For detailed information about these products, see the following Cisco document:
http://www.cisco.com/en/US/products/hw/modules/ps4999/
products_data_sheet09186a00801a557c.htmlCWDM SFP Support for the 2-Port Gigabit Ethernet SPA on the Cisco 7304 Router
Platform: Cisco 7304
The following Coarse Wave Division Multiplexer (CWDM) Small Form-Factor Pluggable (SFP) laser optical transceiver modules are supported on Gigabit Ethernet ports of the 2-port Gigabit Ethernet SPA (SPA-2GE-7304):
•
•
•
•
•
•
•
•
For detailed information about these products, see the following Cisco document:
http://www.cisco.com/en/US/products/hw/modules/ps4999/
products_data_sheet09186a00801a557c.htmlNew Software Features in Cisco IOS Release 12.2(28)SB
This section describes new and changed features in Cisco IOS Release 12.2(28)SB. Some features may be new to Cisco IOS Release 12.2SB but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(28)SB. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.
Table 14 shows features that have never before been released in any public Cisco IOS software image for the Cisco 10000 series and that released for the first time for the Cisco 10000 series in Cisco IOS Release 12.2(28)SB. Other features may be new for the Cisco 10000 series in Cisco IOS Release 12.2(28)SB, but have been released before in other public Cisco IOS software images for the Cisco 10000 series, and are therefore not included in Table 14.
Table 15 shows how select features for the Cisco 7304 are supported and uses the following conventions:
•
•
Table 15 Features Supported on the Cisco 7304 Engines and in the PXF Path
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Not applicable1
Yes
Yes
Not applicable1
Yes
Yes
Not applicable1
Yes
Turbo Access Control List Scalability Enhancements [Phase 1]
Yes
Not applicable1
No2
Yes
Yes
Not applicable3
1 This feature is supported on the NPE-G100 but not in the PXF path of the NPE-G100. Therefore, the PXF enhancement is not applicable to the NPE-G100.
2 Although this feature is not supported in the PXF path, this enhancement improve system memory utilization in the PXF path.
3 This feature does not apply to the PXF path.
AAA Features
Cisco IOS Release 12.2(28)SB introduces support for the following AAA features.
AAA CLI Stop Record Enhancement
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the Per VRF AAA document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftvrfaaa.htm
AAA Double Authentication Secured by Absolute Timeout
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/gt_dasat.htm
AAA Per-User Scalability
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Per VRF AAA document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftvrfaaa.htm
AAA-PPP-VPDN Non-Blocking
Platforms: Cisco 7200 series, Cisco 7301
Previously, Cisco IOS software created a statically configurable number of processes to authenticate calls. Each process would handle a single call, but in some situations the limited number of processes could not keep up with the incoming call rate. This resulted in some calls timing out. The AAA-PPP-VPDN Non-Blocking feature changes the software architecture such that the number of processes do not limit the rate of call handling.
ACL Default Direction
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftacldir.htm
Any Transport over MPLS (AToM): Frame Relay over MPLS (FRoMPLS)
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature for the Cisco 10000 series, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/overview.html
ATM Features
Cisco IOS Release 12.2(28)SB introduces support for the following ATM features.
ATM Bulk VC Configuration
Platform: Cisco 10000 series
For detailed information about this feature, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/overview.html
ATM Conditional Debug Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature (which is also known as the ATM Conditional debug/show Commands feature), see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sbc27/12satmdb.htm
ATM Multilink PPP Support on Multiple VCs
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 7500 series, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftatmmlt.htm
ATM OAM Ping
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s21/
12atmpng.htmATM OAM Traffic Reduction
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s23/
atmoam.htmATM PVCs
Platform: Cisco 10000 series
The ATM line cards support the full range of virtual path identifier (VPI)/virtual channel identifier (VCI) pairs (unidirection only)—8-bit VPI range and 16 bit VCI range. Table 16 lists the maximum number of active virtual channels (VCs) supported on ATM line cards for Cisco IOS Release 12.2(28)SB.
Table 16 Active VCs on ATM Line Cards
per Port
per ModuleE3/DS3
4,096
32,7681
28,6722
OC-3
8,191
32,7643
28,6724
OC-12
16,384
16,384
16,384
1 For 32,768 VCs per module, 4096 VCs must be unshaped UBR VCs.
2 For 28,672 VBR, CBR, and shaped UBR VCs, no VCs can be in shaped VP tunnels. If VCs are in shaped VPs, the number of VBR, CBR, and shaped UBR VCs is 22,204.
3 For 32,764 VCs per module, 4096 VCs must be unshaped UBR VCs.
4 For 28,672 VBR, CBR, and shaped UBR VCs, no VCs can be in shaped VP tunnels. If VCs are in shaped VPs, the number of VBR, CBR, and shaped UBR VCs is 22,204.
You can configure the maximum number of VCs across the ports in any fashion, provided that you do not exceed the per-port maximum.
Although the maximum number of VBR, CBR, and shaped UBR VCs per E3/DS3 and OC-3 ATM line card is 28,672, the router supports a maximum of 22,204 VBR, CBR, and shaped UBR VCs per line card that you can place within virtual path (VP) tunnels. If you attempt to bring up more than 22,204 VCs in a configuration that includes VP tunnels and VCs (hierarchical traffic shaping configuration), the VCs might not assign traffic correctly or the VCs might not come up at all. Be sure to limit the number of configured VBR, CBR, and shaped UBR VCs on an ATM card to less than 22,204 VCs if you place the VCs in VP tunnels.
ATM PVC Range and Routed Bridge Encapsulation Subinterface Grouping
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtatmpvr.htm
ATM VC into VP Shaping
Platform: Cisco 10000 series
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/10qtitle.html
Attribute Screening for Access Requests
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123limit/123b/123b3/
gt_asfar.htmAutosense of MUX/SNAP Encapsulation and PPPoA/PPPoE on ATM PVCs
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122b/122b_15/
ftpauto2.htmBGP Features
Cisco IOS Release 12.2(28)SB introduces support for the following Border Gateway Protocol (BGP) features.
BGP 4 MIB Support for per-Peer Received Routes
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, which is also known as the BGP Received Routes MIB feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s21/
sbgprmib.htmBGP Convergence Optimization
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
BGP Convergence Optimization introduces a new algorithm for update generation that reduces the time that is required for Border Gateway Protocol (BGP) convergence. Neighbor update messages are optimized before they are forwarded to neighbors. Updates are optimized and forwarded based on peer groups and per-individual neighbors. This enhancement improves BGP convergence, router boot time, and transient memory usage. This enhancement is not user configurable.
Note
BGP Cost Community Support for EIGRP MPLS VPN PE-CE with Backdoor Links
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s25/
fsbgpcce.htm#wp1027129BGP Increased Support of Numbered AS-Path Access Lists to 500
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sbc27/ftiaaspa.htm
BGP Support for IP Prefix Import from a Global Table into a VRF Table
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fs_bgivt.html
Bit Error Rate Testing (BERT)
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s21/
bert.htmBridged 1483 Encapsulated Traffic over ATM SVCs
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftbridge.htm
Byte-Based Weighted Random Early Detection
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s26/
fsbyte.htmCEF/dCEF - Cisco Express Forwarding
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature for the Cisco 10000 series, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/overview.html
Clear IPC Statistics
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ft_ipc.htm
Configurable MAC Address for PPPoE
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_11/
gt_cmppp.htmCrashinfo Support
Platform: Cisco 10000 series
The Crashinfo Support feature for the Cisco 10000 series is a mechanism to reliably and quickly store useful information related to unexpected system shutdowns directly to a local flash card. This information can be retrieved after a system reload to aid in the analysis and resolution of a system error.
To enable the Crashinfo Support feature, enter the exception crashinfo file device:filename global configuration command. Use the device and filename arguments to specify the flashcard and file to be used for storing the diagnostic information. To change the size of the crashinfo buffer, enter the exception crashinfo buffersize command. The default buffer size is 32 Kilobytes.
Define Interface Policy-Map AV Pairs AAA
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123limit/123x/123xi7/
123xiqos.htmDHCP Features
Cisco IOS Release 12.2(28)SB introduces support for the following DHCP features.
DHCP Accounting
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Address Allocation Using Option 82
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftrbeo82.htm
DHCP Client Dynamic Subnet Allocation API
Platform: Cisco 7200 series
The DHCP Client Dynamic Subnet Allocation API feature is an application programming interface (API) that is called by the DHCP Server—On-Demand Address Pool Manager feature for obtaining a subnet or releasing a subnet to the source server via DHCP. This feature allows automated configuration of Layer 3 devices for simplified deployment.
DHCP—Configurable DHCP Client
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Lease Limit per ATM RBE Unnumbered Interface
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP ODAP Server Support
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP On-Demand Address Pool Manager for Non-MPLS VPN Pools
Platform: Cisco 10000 series
For detailed information about this feature, see the following DHCP Server—On-Demand Address Pool Manager document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Option 82 Support for Routed Bridge Encapsulation
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Relay MPLS VPN Support
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Relay Subscriber Identifier Suboption
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Release and Renew CLI in EXEC Mode
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Server—On-Demand Address Pool Manager
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP Server—Option to Ignore All BOOTP Requests
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP—Static Mapping
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCP—Statically Configured Routes Using a DHCP Gateway
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdhcpsb.htm
DHCPv6 Prefix Delegation via AAA
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the "Prefix Delegation" section in the "Implementing ADSL and Deploying Dial Access for IPv6" chapter that is part of the Cisco IOS IPv6 Configuration Library:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-adsl_dial.html
DHCPv6 Relay Agent
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
A client locates a DHCP server by using a reserved, link-scoped multicast address. Therefore, it is a requirement for direct communication between the client and the server that the client and the server be attached to the same link. However, in some situations in which ease of management, economy, or scalability is a concern, it is desirable to allow a DHCP client to send a message to a DHCP server that is not connected to the same link. A DHCP relay agent, which may reside on the client's link, is used to relay messages between the client and the server. DHCP relay agent operation is transparent to the client.
For more information, see the Implementing Basic Connectivity for IPv6 chapter that is part of the Cisco IOS IPv6 Configuration Library:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html
Distributed Time-Based Access Lists
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftdistac.htm
Dialer CEF
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftdlrcef.htm
DNS Spoofing
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_2/gtdnsspf.htm
Dynamic ATM VP and VC Configuration Modification
Platform: Cisco 10000 series
The Dynamic ATM VP and VC Configuration Modification feature enables you to change the virtual circuit (VC) weight or virtual path (VP) shaping parameters without affecting the state of the VC or VP. In other words, the VC and VP remain up and operational (the VC or VP is not torn down at the segmentation and reassembly [SAR], and the session does not go down). The dynamic parameters include ATM VP parameters (peak cell rate [PCR] or cell delay variation tolerance [CDVT]) and VC parameters (weight, PCR, sustainable cell rate [SCR], maximum burst size [MBS], and CDVT). When you change the VC parameters or the VP rate, there can be a momentary change in the shaped rate of the VP, in which the rate at which cells are sent may be over or under the configured rate. The session stays up, and no data is lost.
The range of integer values that are supported by the weighting-value argument of the weight command is 5 to 255.
Dynamic Subscriber Bandwidth Selection
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftdbs.htm
EIGRP MPLS VPN PE-CE Site of Origin (SoO)
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_8/
gtmvesoo.htmEmbedded Event Manager 2.1
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_14/
gteem21.htmEnabling OSPFv2 on an Interface Using the ip ospf area Command
Platform: Cisco 10000 series
For detailed information about this feature, which is also known as the Area Command in Interface Mode for OSPFv2 feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s29/
ospfarea.htmEnhanced Tracking Support
Platform: Cisco 10000 series
For detailed information about this feature, including Enhanced Object Tracking, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbaiptrk.htm
Entity/Environment Monitoring
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco documents:
•
http://www.cisco.com/en/US/docs/routers/7200/technical_references/7200_mib_guides/7200_mib_specs_guide_v3/7200mib3_1.html
•
http://www.cisco.com/en/US/docs/routers/7300/technical_references/7301_mib_guides/7301_mib_specs_guide_v3/7301mib3_1.html
Extended NAS-Port-Type and NAS-Port Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/rd_naspt.htm
Frame Relay Features
Cisco IOS Release 12.2(28)SB introduced support for the following Frame Relay features.
Frame Relay Fast Restart
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120st/120st19/
19stfr72.htmFrame Relay MIB Enhancements
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftfrmibe.htm
Frame Relay—show and debug Command Enhancements
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series.
For detailed information about this feature, which is also known as the Frame Relay show Command and debug Command Enhancements feature, see the following Cisco document:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080519921.html
Frame Relay VC Bundling
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Frame Relay PVC Bundles with IP and MPLS QoS Support document:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ft_frbnd.html
Generic Routing Encapsulation (GRE) Tunnel Keepalive
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_gretk.htm
Globalized Channelizations for SONET/SDH
Platform: Cisco 10000 series
The Globalized Channelizations for SONET/SDH feature enables the Cisco 10000 series 1-port channelized OC-12 line card and 4-port channelized STM-1 line card to support the following globalized channelization modes:
•
–
–
–
–
–
•
–
–
–
–
–
–
IEEE 802.1p Support
Platform: Cisco 10000 series
The IEEE's 802.1p standard now allows a range of traffic prioritization of Layer 2 frames from critical to non-critical through a frame priority tag, providing a higher quality of service (QoS) on high-speed LANs. Network managers can implement traffic prioritization through infrastructure device upgrades. IEEE 802.1p is a key enabler to QoS by enabling "Prioritized Ethernet" with up to eight priorities in Ethernet and Token Ring networks.
IGMP State Limit
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
The IGMP State Limit feature provides protection against denial of service attacks caused by IGMP packets. The new CLI introduced by this feature allows you to configure a limit on the number of IGMP states that results from IGMP, IGMP Version 3 lite, and URL Rendezvous Directory (URD) membership reports on a per-interface or global basis. Membership reports in excess of the configured limits will not be entered in the IGMP cache, and traffic for those excess membership reports will not be forwarded.
For more information, see the Customizing IGMP document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_customize_igmp.html
IGMPv3
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the Customizing IGMP document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_customize_igmp.html
Improved show commands for MLP-ATM LFI
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the Troubleshooting Enhancements for Multilink PPP over ATM Link Fragmentation and Interleaving document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/gttrbmlp.htm
Intelligent Service Gateway (ISG) Features
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series.
Cisco IOS Release 12.2(28)SB introduces support for the following Intelligent Service Gateway (ISG) features on the Cisco 7200 series, Cisco 7301, and Cisco 10000 series as explained in Table 17.
For detailed information about these features, see the Cisco IOS Intelligent Service Gateway Configuration Guide that is part of the Cisco IOS ISG Configuration Library:
http://www.cisco.com/en/US/docs/ios/12_2sb/isg/configuration/guide/isg_lib.html
Interface Alias Long Name Support
Platform: Cisco 10000 series
For detailed information about this feature, see the following Interface Index Display and Interface Alias Long Name Support for SNMP document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftshowif.htm
IP Features
Cisco IOS Release 12.2(28)SB introduced support the following IP features.
IPMROUTE-STD-MIB
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
The IPMROUTE-STD-MIB, as defined in RFC 2932, is a module for IP multicast routing in a manner independent of the specific multicast routing protocol in use. Support for this MIB replaces the draft form of the IPMROUTE-MIB.
The IPMROUTE-STD-MIB supports all the MIB objects of the IPMROUTE-MIB and also supports the following four new MIB objects:
•
•
•
•
The ipMRouteScopeNameTable MIB object is not supported because it is not relevant to multicast routers.
IP Multicast Load Splitting Across Equal-Cost Paths
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the Load Splitting IP Multicast document:
http://www.cisco.com/en/US/docs/ios/12_4t/ip_mcast/configuration/guide/mctlsplt.html
For detailed information about this feature for the Cisco 10000 series, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/broadband/overview.html
IP SLAs LSP Health Monitor
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080528450.html
IPv6 Access Services: DHCPv6 Prefix Delegation
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
DHCP for IPv6 can be used in environments to deliver stateless address assignment information. Stateless address assignment uses configuration parameters that do not require a server to maintain a dynamic state for individual clients, such as DNS server addresses and domain search list options.
For more information, see the Implementing Basic Connectivity for IPv6 document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html
IPv6 Features for the Cisco 10000 Series
Platform: Cisco 10000 series
Cisco IOS Release 12.2(28)SB supports the IPv6 Hardware: PXF Accelerated for IPv6 Forwarding feature for the Cisco 10000 series, which includes support for the following IPv6 features:
•
–
–
–
(Note: A ping in the fast-path mode is not supported; the support rate is limited to 10 pings per second per interface.)–
–
–
–
–
–
–
•
–
–
•
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
•
–
–
•
–
–
–
–
–
(Note: PPPoA, PPPoE, and PPP over a VLAN are not supported; PPP over a serial link is supported.)–
Note
For more information about these IPv6 features, see the "Start Here: Cisco IOS Software Release Specifics for IPv6 Features" chapter of the Cisco IOS IPv6 Configuration Library:
http://www.cisco.com/en/US/docs/ios/12_2t/ipv6/ipv6_vgf.html
ISDN Backup in MPLS Core
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_2/gtisdnbk.htm
In Service Software Upgrade (ISSU)
Platform: Cisco 10000 series
The In Service Software Upgrade (ISSU) feature includes support for the following features:
•
•
•
•
•
•
•
•
For detailed information about these features, see the Cisco IOS In Service Software Upgrade Process document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_issu.htm
The ISSU feature includes support for the following MPLS features:
•
•
•
For detailed information about these features, see the ISSU MPLS Clients document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/iscli28.htm
The ISSU feature is supported on the following line cards:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
L2TP and L2TPv3 Features
Cisco IOS Release 12.2(28)SB introduces support for the following L2TP and L2TPv3 features.
L2TP Congestion Avoidance
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbl2scca.htm
L2TP Disconnect Cause Information
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/gtl2disc.htm
L2TP Extended Failover
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbl2tpef.htm
L2TP Redirect
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbl2tpmr.htm
L2TP Security
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbl2tsec.htm
L2TP Tunnel Connection Speed Labeling
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbclabel.htm
L2TPv3 Control Message Hashing
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Layer 2 Tunnel Protocol Version 3 document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s31/
l2tpv31s.htmL2TPv3 Control Message Rate Limiting
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Layer 2 Tunnel Protocol Version 3 document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s31/
l2tpv31s.htmProtocol Demultiplexing for L2TPv3
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Layer 2 Tunnel Protocol Version 3 document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s31/
l2tpv31s.htmLayer 2 Local Switching
Platform: Cisco 10000 series
For detailed information about this feature, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/swconfig/cfggdes/bba/index.htm
Layer 2 Local Switching: Frame Relay to Frame Relay
Platform: Cisco 10000 series
For detailed information about this feature, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/swconfig/cfggdes/bba/index.htm
Layer 2 VPN Features
Cisco IOS Release 12.2(28)SB introduces support for the following Layer 2 VPN features.
L2VPN Pseudowire Redundancy
Platform: Cisco 7403
For detailed information about this feature, see the following Cisco document:
L2VPN Pseudowire Switching
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s31/
fsstitch.htmLayer 2 VPN: Syslog, SNMP Trap and Show Command Enhancements for AToM and L2TPv3
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Layer 2 Tunnel Protocol Version 3 document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s31/
l2tpv31s.htmNSF/SSO: L2VPN Pseudowire Redundancy Support
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sudosso.htm
Local AAA Server
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_14/gt_laas.htm
Local Template-Based ATM PVC Provisioning
Platform: Cisco 10000 series
The Local Template-Based ATM PVC Provisioning feature supports permanent virtual circuit (PVC) autoprovisioning for an infinite range of virtual path identifier (VPI)/virtual channel identifier (VCI) combinations on an ATM interface. This feature enables ATM PVCs to be provisioned automatically as needed from a local configuration, which makes the provisioning of large numbers of digital subscriber line (DSL) subscribers easier, faster, and less prone to error. ATM PVC autoprovisioning can be configured on a PVC, an ATM PVC range, or a virtual circuit (VC) class. If a VC class that is configured with ATM PVC autoprovisioning is assigned to the main interface, all the PVCs on that main interface will be autoprovisioned; this configuration is sometimes called an infinite range.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122b/122b_15/
ftpvcaut.htmLogging to Local Non-Volatile Storage (ATA Disk)
Platform: Cisco 10000 series
For detailed information about this feature, see the Syslog Writing to Flash document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/cs_sysls.htm
MLP LFI over ATM Configuration Scaling
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, which is also known as the Link Fragmentation and Interleaving for Frame Relay and ATM Virtual Circuits feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbamlatm.htm
MPLS Features
Cisco IOS Release 12.2(28)SB introduces support for the following Multiprotocol Label Switching (MPLS) and MPLS-related features.
MPLS (Multiprotocol Label Switching)
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature for the Cisco 10000 series, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/swconfig/cfggdes/bba/index.htm
MPLS-Aware NetFlow
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sx_mnf.htm
MPLS Egress NetFlow Accounting
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/egrsbkb.htm
MPLS Embedded Management—High Capacity Counter
Platforms: Cisco 7200 series, Cisco 7301
As of Cisco IOS Release 12.2(28)SB, the MPLS IF MIB has a 64-bit structure to ensure that high-capacity loads can be handled.
MPLS Embedded Management—LSP Ping/Traceroute and AToM VCCV
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gslsppt.html
MPLS Label Distribution MIB: MPLS LDP Trap Enhancement
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, which is also known as the MPLS VPN MIB v05 - Trap Enhancements feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s25/
fsvnmb25.htm#wp1027129MPLS Label Distribution Protocol (LDP)
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftldp13.htm
MPLS—LDP AutoConfiguration
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s30/
fsldpaut.htmMPLS—LDP MD5 Global Configuration
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_md5.htm
MPLS—LDP Session Protection
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s30/
fssespro.htmMPLS—Multilink PPP Support
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/
gtmpmlp.htmMPLS QoS—DiffServ Tunnel Mode Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/
ftdtmode.htmMPLS HA Features
Cisco IOS Release 12.2(28)SB introduces support for the following Multiprotocol Label Switching (MPLS) High Availability (HA) features for the Cisco 10000 series.
Note
NSF/SSO: MPLS LDP and LDP Graceful Restart
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s25/
fsldpgr.htmNSF/SSO: MPLS VPN
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s25/
fsvpngr.htmMPLS High Availability
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s25/
fshaov.htmCommand Changes in Relation to MPLS HA
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For command changes in relation to Multiprotocol Label Switching (MPLS) high availability (HA), see the following documents:
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s25/
fscefcmd.htm•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s25/
fscmdha.htmMPLS Traffic Engineering Features
Cisco IOS Release 12.2(28)SB introduces support for the following Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) features:
MPLS Diff-Serv-Aware Traffic Engineering (DS-TE)
Platforms: 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the MPLS Traffic Engineering—DiffServ Aware document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s22/
12s_dste.htmMPLS Traffic Engineering (TE)
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s23/
fs23te.htmMPLS Traffic Engineering (TE)—Automatic Bandwidth Adjustment for TE Tunnels
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
fsbandaj.htmMPLS Traffic Engineering (TE)—Configurable Path Calculation Metric for Tunnels
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
fsmetric.htmMPLS Traffic Engineering (TE)—Forwarding Adjacency
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s18/
fstefa_3.htmMPLS Traffic Engineering (TE)—Interarea Tunnels
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s18/
fsiarea3.htmMPLS Traffic Engineering (TE)—IP Explicit Address Exclusion
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftaddexc.htm
MPLS Traffic Engineering (TE)—Scalability Enhancements
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s22/
fsscen.htmMPLS Traffic Engineering (TE)—SNMP Notification Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the MPLS Traffic Engineering MIB document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
temib2.htmMPLS VPN Features
Cisco IOS Release 12.2(28)SB introduces support for the following Multiprotocol Label Switching (MPLS) Virtual Private Network (VPN) features.
MPLS VPN—Carrier Supporting Carrier
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbb2scsc.htm
MPLS VPN—Carrier Supporting Carrier—IPv4 BGP Label Distribution
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbbcsc13.htm
MPLS VPN—eiBGP Multipath Loadbalancing Enhancements
Platform: Cisco 7304, Cisco 10000 series
In this Cisco IOS release, the MPLS-VPN eiBGP Multipath Loadbalancing feature has been enhanced to support up to 96,000 VPN routes in a scenario in which there are four BGP paths and one IGP path to each BGP peer. In previous Cisco IOS releases, up to 48,000 VPN routes were supported.
It is important to note that the maximum number of load-balanced paths used per route decreases from 16 to 8 as a result of this feature. The number of load-balanced paths per route is determined using a round-robin algorithm, but the round-robin algorithm now can only use up to 8 paths instead of 16, like it could previously.
This is a functional enhancement that introduces no new configuration.
MPLS VPN—Explicit Null Label Support with BGP IPv4 Label Session
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s27/
gsxnlbsp.htmMPLS VPN—Half Duplex VRF (HDVRF) Support with Static Routing
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/hdvrfdyn.html
MPLS VPN—Inter-AS—IPv4 BGP Label Distribution
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
https://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbb_smlp.html
MPLS VPN—Inter-Autonomous System Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/interas.htm
MPLS VPN—MIB Support: MPLS VPN Trap Enhancement
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the MPLS VPN—MIB Support document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s25/
fsvnmb25.htm#wp1027129MPLS VPN—Show Running VRF
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_svrf.htm
MPLS VPN—VPN-Aware LDP MIB
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the MPLS Label Distribution Protocol MIB document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/
ldpmib13.htm#wp1015327MPLS VPN—VRF-Select for PXF
Platform: Cisco 7304
VRF-Select is supported in the PXF processing path for a Cisco 7304.
For information about MPLS VPN VRF-Select, see the MPLS VPN: VRF Selection Based on Source IP Address document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_vrf_select_ip.html
For additional information about this feature and all other features in the PXF-processing path, including restrictions, see the Cisco 7304 Troubleshooting and Configuration Notes document:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/trouble/1270note.htm#wp65935
Multicast-VPN: Multicast Support for MPLS VPN
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature (which is also known as the Multicast VPN—IP Multicast Support for MPLS VPNs feature), see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbb_mvpn.htm
MQC Policy Map Support on Configured VC Range
Platforms: Cisco 7200 series, Cisco 7301
The MQC Policy Map Support on Configured VC Range feature extends policy map functionality to simplify the configuration of ranges of ATM VCs. Using the service-policy command, this feature allows you to apply a QoS service policy to a range of VCs.
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/28sbvrng.htm
Multilink Frame Relay (FRF.16.1) Variable Bandwidth Class Support
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Multilink Frame Relay (FRF.16.1) document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s14/
fs_mfr.htmMultiple Action Policer for PXF
Platform: Cisco 7304
The Multiple Action Policer feature further extends the functionality of the Cisco IOS Traffic Policing feature (a single-rate policer feature). The Traffic Policing feature is a traffic policing mechanism that allows you to control the maximum rate of traffic sent or received on an interface. Both of these traffic policing mechanisms mark packets as conforming to, exceeding, or violating a specified rate. After a packet is marked, you can specify an action to be taken on the packet based on that marking.
With the Traffic Policing feature, you can specify only one conform action, one exceed action, and one violate action. Now with the Multiple Action Policer feature, you can specify multiple conform, exceed, and violate actions for the marked packets.
The Multiple Action Policer feature is introduced in the PXF processing path for the first time. For additional information about this feature and all other features in the PXF-processing path, including restrictions, see the Cisco 7304 Troubleshooting and Configuration Notes document:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/trouble/1270note.htm#wp65935
Multirouter Automatic Protection Switching (APS)
Platform: Cisco 10000 series
For detailed information about this feature, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/swconfig/cfggdes/bba/index.htm
NetFlow MPLS Label Export
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sx_pal.htm
Nonstop Forwarding and Stateful Switchover Features
Nonstop Forwarding
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
Cisco IOS Release 12.2(28)SB supports the following Nonstop Forwarding (NSF) features:
•
•
•
•
•
For detailed information about these features, see the Cisco Nonstop Forwarding document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s20/
fsnsf20s.htmStateful Switchover
Platforms: Cisco 7304, Cisco 10000 series
Cisco IOS Release 12.2(28)SB supports the following Stateful Switchover (SSO) features:
•
Note
•
•
•
•
•
For detailed information about these features with the exception of the SSO - Multilink PPP (MLP) feature, see the Stateful Switchover document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s20/
fssso20s.htmFor detailed information about the SSO - Multilink PPP (MLP) feature, see the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/swconfig/cfggdes/bba/index.htm
Offload Server Accounting Enhancement
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftoffact.htm
OSPF ABR Type 3 LSA Filtering
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftabrt3f.htm
Packet Classification Using the Frame Relay DLCI Number
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s26/
ftdlc26i.htmpeer pool backup Command
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the Peer Pool Backup document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/gtpeerpl.htm
Per-Packet Load Balancing (PPLB)
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s21/
pplb.htmPer-User QoS via AAA Policy Name
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ft_puq.htm
Per VRF AAA
Platform: Cisco 10000 series
For detailed information about this feature, see the Per VRF AAA document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftvrfaaa.htm
PIM Multicast Scalability
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
The PIM Multicast Scalability feature enhances the Protocol Independent Multicast (PIM) protocol in Cisco IOS software by adding a new level of scalability. With this feature, edge devices can have a large number of multicast groups and users without increasing the CPU utilization of the router.
Policer Enhancement: Multiple Actions
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s26/
fsmu26s.htmPost-Switchover Core Dump
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s22/
coredump.htmPPP MLP MRRU Negotiation Configuration
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/
gtmpmrru.htmPPPoE Features
Cisco IOS Release 12.2(28)SB introduces support for the following PPPoE features.
PPPoA/PPPoE Autosense for ATM PVCs
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftp_auto.htm
PPPoE Circuit-ID Tag Processing
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbecidtg.htm
PPPoE over Gigabit Ethernet Interface
Platform: Cisco 7200 series, Cisco 7301, Cisco 10000 series
The PPPoE over Gigabit Ethernet feature enhances PPP over Ethernet (PPPoE) functionality by adding support for PPPoE and PPPoE over IEEE 802.1Q VLANs on Gigabit Ethernet interfaces.
PPPoE Relay
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/
gtpppoer.htmPPPoE Service Selection
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/gtpoess.htm
PPPoE Session Limit
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftppoesl.htm
PPPoE Session Limit per NAS Port
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122b/
122b_15/12b_nas.htmPPPoE Session Recovery After Reload
Platforms: Cisco 7200 series, Cisco 7301 Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_2/
gtppprec.htmPseudowire Emulation Edge-to-Edge MIBs for Ethernet Services
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbpweatm.htm
Pseudowire Emulation Edge-to-Edge MIBs for Ethernet and Frame Relay Services
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbpweatm.htm
QoS Features for the Cisco 7200 Series and Cisco 7301
Cisco IOS Release 12.2(28)SB supports the following QoS features for the Cisco 7200 series and Cisco 7301.
QoS: ATM Cell-Based Policer
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s28/
fscbp.htmQoS: ATM-CLP and Layer 2 CoS-Based WRED
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s28/
12swred.htmQoS: CBQoSMIB Parity Across Cisco IOS Release 12.0S, 12.2SB, and 12.3T
Platforms: Cisco 7200 series, Cisco 7301
Several MIB objects have been added to existing tables, and a new table has been added to the Class-Based Quality of Service (QoS) MIB (CBQoSMIB). These additions to the CBQoSMIB provide parity of the MIB across three specific Cisco IOS Releases—Cisco IOS Release 12.0S, 12.2SB, and 12.3T. As a result of these additions and revisions, the CBQoSMIB now supports the same features across all three of these platforms.
The CBQoSMIB now supports the following Cisco IOS features:
•
The QoS: ATM Cell-Based Policer feature allows you to configure traffic policing for ATM cells. This feature allows you to specify traffic policing in cells, bytes, or percentage of bandwidth.
For more information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/fscbp.htm•
The QoS: ATM-CLP and Layer 2 CoS-Based WRED feature extends the functionality of the Cisco Weighted Random Early Detection (WRED) software. With the QoS: ATM-CLP and Layer 2 CoS-Based WRED feature, WRED can take into account the Layer 2 class of service (CoS) value of a packet and the ATM cell loss priority (CLP) of a packet when calculating the drop probability of network traffic.
For more information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/12swred.htm•
The QoS: Color-Aware Policer feature enables a "color-aware" method of traffic policing. This feature allows you to police traffic according to the color classification of a packet that is based on packet-matching criteria defined for two user-specified traffic classes: the conform-color class and the exceed-color class. These two traffic classes are created using the conform-color command, and the metering rates are defined using the police command.
For more information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s26/12s_cap.htm•
This feature allows you to configure bandwidth as a percentage within low latency queuing (LLQ).
For more information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/12sllqpc.htm•
The QoS: Percentage-Based Policing feature allows you to configure traffic policing on the basis of a percentage of bandwidth available on the interface. This feature also allows you to specify the committed burst (bc) size and the excess burst (be) size (used for configuring traffic policing) in milliseconds (ms). Configuring traffic policing in this manner enables you to use the same policy map for multiple interfaces with differing amounts of bandwidth.
For more information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/12spctpg.htm•
The QoS: Percentage-Based Shaping feature allows you to configure traffic policing and traffic shaping on the basis of a percentage of bandwidth available on the interface. This feature also allows you to specify the committed (conform) burst (bc) size and the excess (peak) burst (be) size (used for configuring traffic shaping) in milliseconds (ms). Configuring traffic shaping in this manner enables you to use the same policy map for multiple interfaces with differing amounts of bandwidth.
For more information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/12spctsg.htm•
The QoS: Time-Based Thresholds for WRED and Queue Limit feature allows you to specify the Weighted Random Early Detection (WRED) minimum and maximum thresholds or the queue limit threshold in milliseconds (ms). Previously, these thresholds could only be specified in packets or bytes. Now, all three units of measure are available. Once the threshold limits are configured in a policy map, the policy map can be used on multiple interfaces, including those with different amounts of bandwidth.
For more information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/12swrdql.htmThe following additional changes were made to the MIB tables:
•
For more information about the Cisco IOS set commands, see the Cisco command reference publications for the Cisco IOS release that you are using.
For a list of the specific MIB objects added, see the CISCO-CLASS-BASED-QOS-MIB-CAPABILITY.html file at the following URL:
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=
CISCO-CLASS-BASED-QOS-MIB-CAPABILITYFor more information about the preceding CBQoSMIB and the MIB objects and tables, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:
http://tools.cisco.com/ITDIT/MIBS/servlet/index
QoS: Color-Aware Policer
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s26/
12s_cap.htmQoS: Frame Relay QoS Hierarchical Queueing Framework Support
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_frhqf.htm
QoS: Match on ATM CLP
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s28/
12smcatm.htmQoS: Percentage-Based Policing
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s28/
12spctpg.htmQoS: Percentage-Based Shaping
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/
120s28/12spctsg.htmQoS: Percentage-Based and Time-Based Policing Parameters
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s28/
12spbtbp.htmQoS: Per-Session Shaping and Queuing on LNS
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbsbpssq.htm
QoS Features for the Cisco 10000 Series
Cisco IOS Release 12.2(28)SB supports the following quality of service (QoS) features for the Cisco 10000 series:
•
•
•
•
•
•
•
•
•
•
In addition to the Cisco 10000 series, the following features are also supported on the Cisco 7200 series, Cisco 7301, and Cisco 7304:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For information about all features that are mentioned in this section, see the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
In addition, Cisco IOS Release 12.2(28)SB supports the following QoS features for the Cisco 10000 series.
Modular QoS CLI (MQC)-Based Frame Relay Traffic Shaping
Platform: Cisco 10000 series
The Modular QoS CLI (MQC)-based Frame Relay Traffic Shaping feature provides users with the ability to configure Frame Relay Traffic Shaping (FRTS) by using MQC commands.
QoS: Broadband Aggregation Enhancements, Phase 1
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbbbrs1a.htm
QoS: Enhanced Show Commands for Active Policies
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_acpm.htm
RADIUS Features
Cisco IOS Release 12.2(28)SB introduces support for the following RADIUS features.
Framed-Route in RADIUS Accounting
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/gt_fra22.htm
RADIUS-Based Lawful Intercept
Platforms: Cisco 7200 series, Cisco 7301
Note
RADIUS-Based Lawful Intercept is a Layer-2 feature, that is, a feature at the user-session level. With RADIUS-Based Lawful Intercept, traffic interception is provisioned through RADIUS and the resulting interception data is sent to the mediation device by using a RADIUS interface. The SNMP interface is completely bypassed.
For detailed information about RADIUS-Based Lawful Intercept, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_radlw.html
RADIUS NAS-IP-Address Configurability
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123limit/123b/123b3/
gt_siara.htmRADIUS Push for MOD CLI Policies
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the Define Interface Policy-Map AV Pairs AAA document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123limit/123x/123xi7/
123xiqos.htmRADIUS Server Load Balancing
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7403, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbrdldbl.htm
RADIUS Server Reorder on Failure
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123_1/gt_rsrof.htm
radius-server source-port Command
Platform: Cisco 10000 series
The radius-server source-ports extended command enabled you to configure the NAS to use 200 ports in the range from 21645 to 21844 as the source ports for sending out RADIUS requests. With 200 source ports, up to 256*200 authentication and accounting requests can be outstanding at one time. During peak call volume, typically when a router first boots or when an interface flaps, the extra source ports allow sessions to recover more quickly on large-scale aggregation platforms.
To return to the default setting, in which ports 1645 and 1646 are used as the source ports for RADIUS requests, use the no form of this command.
For more information, see the Cisco IOS Security Command Reference, Release 12.3 document:
http://www.cisco.com/en/US/docs/ios/12_3/security/command/reference/sec_p1g.html
RADIUS Timeout Set During Pre-Authentication
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftattr27.htm
RADIUS Tunnel Preference for Load Balancing and Fail-Over
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbradlbf.htm
RADIUS Attributes
Cisco IOS Release 12.2(28)SB introduces support for the following RADIUS attributes.
Connect-Info RADIUS Attribute 77
Platform: Cisco 10000 series
The Connect-Info RADIUS Attribute 77 feature introduces support for RADIUS attribute 77 (Connect-Info), which provides information about connection speeds, modulation, and compression for modem dial-in connections via RADIUS accounting "start" and "stop" records.
When the NAS sends attribute 77 in accounting "start" and "stop" records, you can measure—across the platform—the connect rates. That is, attribute 77 allows you to record "transmit" speed (the speed at which the NAS modem sends information) and "receive" speed (the speed at which the NAS receives information). These modem speeds for user sessions allow you to determine whether user modem connections renegotiate to lower speeds shortly into a session. If the transmit and receive speeds are different from each other, attribute 77 will report both speeds, which allows you to establish the modem connection speeds that customers gets from their session.
RADIUS Attribute 5 (NAS-Port) Format Specified on a Per-Server Group Level
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_14/ra5f.htm
RADIUS Attribute 52 and 53 Gigaword Support
Platform: Cisco 10000 series
The RADIUS Attribute 52 and 53 Gigaword Support feature introduces support for attribute 52 (Acct-Input-Gigawords) and attribute 53 (Acct-Output-Gigawords). Attribute 52 keeps track of the number of times that the Acct-Input-Octets counter has rolled over the 32-bit integer throughout the course of the provided service; attribute 53 keeps track of the number of times the Acct-Output-Octets counter has rolled over the 32-bit integer throughout the delivery of service. Both attributes can be present only in Accounting-Request records where the Acct-Status-Type is set to "Stop" or "Interim-Update." These attributes can be used to accurately account for and bill for usage.
RADIUS Attribute 77 for DSL
Platform: Cisco 10000 series
The RADIUS Attribute 77 for DSL feature introduces support for attribute 77 (Connect-Info) to carry the textual name of the virtual circuit class associated with the given permanent virtual circuit (PVC). (Although attribute 77 does not carry the unspecified bit rate (UBR), the UBR can be inferred from the class name used if one UBR is set up on each class.) Attribute 77 is sent from the network access server (NAS) to the RADIUS server via Accounting-Request and Accounting-Response packets.
RADIUS Attribute 82: Tunnel Assignment ID
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbrad_82.htm
RADIUS Attribute 91 Encrypted and Tagged VSA Support
Platform: Cisco 10000 series
For detailed information about this feature, see the Encrypted and Tagged VSA Support for RADIUS Attribute 91 section in the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt/6400/
64_24b6.htm#115840RADIUS Attribute Screening
Platform: Cisco 10000 series
For detailed information about this feature, which is also known as the RADIUS Attribute Value Screening feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftras.htm
Reserve Memory for Console Access
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s22/
ftresmem.htmRoute Processor Redundancy Plus (RPR+)
Platforms: Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the Stateful Switchover document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s20/
fssso20s.htmRSVP Refresh Reduction and Reliable Messaging
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s29/
fsrelmsg.htmSecure Shell Version 2 Support
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, including the Secure Shell SSH Version 2 Client Support feature, also known as the SSHv2 feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/gt_ssh2.htm
show Command Redirect
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/
ftshowre.htmSticky IP
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, which is also known as the RADIUS Attribute 8 (Framed-IP-Address) in Access Requests feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/radattr8.htm
Subscriber Service Switch
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbsss.htm
TCP MSS Adjustment
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ft_admss.htm
Template ACL/12-Bit ACE
Platform: Cisco 10000 series
For detailed information about this feature, see "Chapter 19, Configuring Template ACLs" in the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/swconfig/cfggdes/bba/index.htm
Three-level Hierarchical Policy Support in PXF
Platform: Cisco 7304
The Modular QoS CLI (MQC) enables users to configure hierarchical policy maps, in which a grandparent policy uses a parent policy, and a parent policy uses a child policy. Support for all three levels of hierarchy was previously not available on the Cisco 7304 router, which used to support two levels of hierarchy. This feature is available in the PXF-processing path.
This feature is the addition of a third level of hierarchy within the MQC. It does not introduce any new commands. For information on configuring the MQC, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt8/
qcfmcli2.htmFor additional information about this feature and all other features in the PXF-processing path, including restrictions, see the Cisco 7304 Troubleshooting and Configuration Notes document:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/trouble/1270note.htm#wp65935
Turbo Access Control List Scalability Enhancements [Phase 1]
Platform: Cisco 7304
In previous Cisco IOS releases, the ability of Turbo Access Control Lists to control PXF traffic could be limited. When the Turbo ACL classification tables grew large because of substantially-sized configurations and certain traffic patterns, all traffic that required ACL classification was punted to the Route Processor because the Turbo ACL table sizes exceeded the amount of available PXF memory.
This feature improves Turbo ACL scalability and enables support for large ACL tables.
This is a functional enhancement that introduces no new configuration.
UDI - Unique Device Identifier
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/
gtpepudi.htmUDP Forwarding Support of IP Redundancy Virtual Router Group (VRG)
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftudpvrg.htm
Using 31-Bit Prefixes on IPv4 Point-to-Point Links
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ft31addr.htm
VBR - NRT Oversubscription
Platform: Cisco 10000 series
For detailed information about this feature, see the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
Virtual Sub-Interface
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the Configuration Enhancements for Broadband Scalability document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftbbenh.htm
Virtual Template Interfaces Limit Expansion
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sb_vtle.htm
VLAN ID Rewrite
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the Any Transport over MPLS document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s28/
fsatom28.htmVLANs over IP Unnumbered Subinterfaces
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/
gtunvlan.htmVPDN Features
Cisco IOS Release 12.2(28)SB introduces support for the following VPDN features.
Accounting of VPDN Disconnect Cause
Platforms: Cisco 7200 series, Cisco 7301
In the past, when a Layer 2 Tunneling Protocol (L2TP) or Layer 2 Forwarding (L2F) session failed or disconnected, the network access server (NAS) and Home GateWay (HGW) reported a very generic disconnect-cause code, such as "LOST CARRIER." These generic codes did not provide enough detailed information for accounting and debugging purposes. The Accounting of VPDN Disconnect Cause feature adds eight new disconnect-cause codes that describe the status of Virtual Private Dialup Network (VPDN) failures and disconnects more specifically than existing generic disconnect-cause codes. These new disconnect-cause codes can be found in the "RADIUS Vendor-Specific Attributes and RADIUS Disconnect-Cause Attribute Values" appendix of the Cisco IOS Security Configuration Guide, Release 12.2:
http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/fsecur_c.html
RFC-2867 Tunnel Accounting
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the RFC-2867 RADIUS Tunnel Accounting document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbradtac.htm
Shell-Based Authentication of VPDN Users
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbexvpnt.htm
Timer and Retry Enhancements for L2TP and L2F
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbretreh.htm
Tunnel Authentication via Radius on LNS
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the Tunnel Authentication via RADIUS on Tunnel Terminator document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbtunaut.htm
VPDN Default Group Template
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbdevpdn.htm
VPDN Group Session Limiting
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbvpdngs.htm
VPDN Multihop by DNIS
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbvmhopd.htm
VPN MIB Enhancements for per-VRF Session Counting
Platforms: Cisco 7200 series, Cisco 7301
An extension has been added to the virtual private dialup network (VPDN) CISCO-VPDN-MGMT-MIB that returns the total number of active sessions for each VPDN template. For customers that associate a VPDN template to each VPN routing and forwarding (VRF) instance, this MIB extension provides a way to monitor session usage per VRF.
Service providers can terminate sessions from multiple customer accounts on the same L2TP network server (LNS). Sharing of the LNS is done by creating one VRF per customer. Session limits on VPDN templates and VPDN groups are configured to control the allocation of sessions among customers and among users within the same customer account. A VPDN template is associated with each VRF, and its session limit restricts the total number of sessions for a customer account. Within that account, users may be assigned to different VPDN groups as their access requirements dictate. Session limits on VPDN groups further control the allocation of customer sessions among VPDN users. In such a setup, the service provider must use Simple Network Management Protocol (SNMP) to retrieve the total number of active sessions per customer to monitor their usage on the LNS.
Prior to the introduction of this MIB enhancement, only the total number of sessions on the LNS across all customer accounts could be retrieved through SNMP. This enhancement extends the CISCO-VPDN-MGMT-MIB to include a read-only table of VPDN template entries, with each entry reporting the number of active sessions across all VPDN groups that are associated with that template. The table entries can be accessed individually by using GET requests or consecutively using repeated GET-NEXT requests.
VPDN Session Disconnect AAA Attribute
Platforms: Cisco 7200 series, Cisco 7301, Cisco 10000 series
The VPDN Session Disconnect AAA Attribute feature adds support for a new vendor-specific attribute (VSA) to be included in accounting stop records. The VSA provides information about the reason for the session disconnect and the identity of the device that initiated the disconnection. This feature introduces support for the accounting keyword of the vpdn-logging command in Cisco IOS Release 12.2(28)SB, and is enabled by entering the vpdn-logging accounting command and keyword.
VRF-Aware VPDN Tunnels
Platforms: Cisco 7200 series, Cisco 7301
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb28/sbvpdnmh.htm
VPN Routing/Forwarding (VRF) CLI Command
Platform: Cisco 10000 series
The Virtual Private Network (VPN) routing/forwarding (VRF) command enables you to enter comments about your VRF configuration.
description description string
no description
The following output is from a configuration example:
Router(config)#ip vrf V4
Router(config-vrf)# ?
IP VPN Routing/Forwarding instance configuration commands:
default Set a command to its defaults
description VRF specific description
exit Exit from VRF configuration mode
export VRF export
import VRF import
maximum Set a limit
no Negate a command or set its defaults
rd Specify Route Distinguisher
route-target Specify Target VPN Extended Communities
Router(config-vrf)#desc
Router(config-vrf)#description ?
LINE Up to 80 characters describing this VRF
Router(config-vrf)#description This Is My 4th VRF
Router(config-vrf)#end
Router#sh ru | beg V4
ip vrf V4
description This Is My 4th VRF
rd 1:406
route-target export 1:400
route-target import 1:400Warm Reload
Platforms: Cisco 7200 series, Cisco 7301, Cisco 7304
The Warm Reload feature enables you to reload your routers without reading images from storage. That is, the Cisco IOS image reboots without ROM monitor mode (ROMMON) intervention by restoring the read-write data from a previously saved copy in the RAM and by starting execution without either copying the image from flash to RAM or self-decompressing the image. Thus, the overall availability of your system improves because the time to reboot your router is significantly reduced.
For additional information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_2/
gtwrmrbt.htmXML Interface to Syslog Messages
Platform: Cisco 10000 series
For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftxmlsys.htm
MIBs
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:
http://tools.cisco.com/ITDIT/MIBS/servlet/index
If Cisco MIB Locator does not support the MIB information that you need, you can also obtain a list of supported MIBs and download MIBs from the Cisco MIBs page at the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
To access Cisco MIB Locator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions found at this URL:
http://tools.cisco.com/RPF/register/register.do
Limitations and Restrictions
The following sections contain information about limitations and restrictions in Cisco IOS Release 12.2SB that can apply to the Cisco 7200 series routers, Cisco 7301 router, Cisco 7304 router, and Cisco 10000 series routers.
Limitations and Restrictions in Cisco IOS Release 12.2(33)SB
This section describes limitations and restrictions in Cisco IOS Release 12.2(33)SB and later releases.
ATM RBE with IPv6
ATM RBE with IPv6 is not supported on the Cisco 10000 series routers. The atm route-bridged ipv6 command is not a supported CLI.
New Boot Image Requirements for Cisco IOS Release 12.2(33)SB
The Cisco IOS Release 12.2(33)SB images for PRE3 RP can only be loaded by the following versions of boot images:
•
•
If user uses older eboot image, the following error message will be seen:
***********************
%SYS-3-IMAGE_TOO_BIG: 'tftp://2.0.0.1/user/c10k3-p11-mz.v122_33_sb_throttle-nightly' is too large for available memory (30801944 bytes).
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
boot of "tftp://2.0.0.1/user/c10k3-p11-mz.v122_33_sb_throttle-nightly" using boot helper "bootflash:c10k3-eboot-mz.v122_31_sb1_throttle-nightly" failed error returned: File read failed -- Not enough space
loadprog: error - on file open
No bootldr found or bootldr boot failed. Using ROMMON TFTP boot instead...
************************To correct this situation, upgrade the eboot image to one described above.
Limitations and Restrictions in Cisco IOS Release 12.2(31)SB11
This section describes limitations and restrictions in Cisco IOS Release 12.2(31)SB11 and later releases.
VLAN Mobility Is Not Allowed for ISG Sessions
For IP sessions initiated through DHCP, ISG does not allow the users to roam from one VLAN to the other. ISG expects the VLAN to remain the same throughout the user session.
If the user moves from one VLAN to the other, the user needs to reboot the Customer Premise Equipment (laptop or the modem) to initiate a new session.
Limitations and Restrictions in Cisco IOS Release 12.2(31)SB2
This section describes limitations and restrictions in Cisco IOS Release 12.2(31)SB2 and later releases.
NSE-150 USB Ports Not Supported
The NSE-150 USB ports are currently not supported on a Cisco 7304 router and should not be used for any reason. Support for USB ports on the NSE-150 will be introduced as an enhancement in a future release of Cisco IOS Release 12.2SB.
Limitations and Restrictions in Cisco IOS Release 12.2(28)SB
This section describes limitations and restrictions in Cisco IOS Release 12.2(28)SB and later releases.
Event-Timestamp AVP for the Cisco 10000 Series
In Cisco IOS Release 12.2SB, Event-Timestamp AVP is not supported in Packet of Disconnect (PoD) on the Cisco 10000 series routers.
High Availability Support for the Cisco 10000 Series
In Cisco IOS Release 12.2(28)SB, the Cisco 10000 series supports Route Processor Redundancy Plus (RPR+), Stateful Switchover (SSO), and In Service Software Upgrade (ISSU). However for broadband aggregation features, the Cisco 10000 series supports RPR+ only.
ISSU Restriction for the Cisco 10000 Series
The In Service Software Upgrade (ISSU) feature for the Cisco 10000 series is not supported for MPLS VPN—Inter-Autonomous System (Inter-AS) configurations.
Per Precedence WRED Statistics
In the output of the show policy-map interface command, the Tail Drops counter indicates the number of packets dropped because the average queue length exceeded the maximum threshold for the given precedence. However, under burst conditions, it is possible that packets can be dropped because the queue is full. These packets are not counted as Tail Drops. The number of packets that are dropped under burst conditions when the queue is full are counted as Output Queue Drops.
RADIUS Attribute 31: PPPoX Calling Station ID
In Cisco IOS Release 12.2(28)SB, the Cisco 10000 series does not support the RADIUS Attribute 31: PPPoX Calling Station ID feature.
Scaling Limits for L2TP Tunnels on the Cisco 10000 Series
For information about scaling limits for L2TP tunnels on the Cisco 10000 series, see the "Scaling Enhancements" section in the "Scalability and Performance" chapter of the Cisco 10000 Series Router Broadband Aggregation, Leased-Line, and MPLS Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/swconfig/cfggdes/bba/
scaling.htm#wp1030846SNMP Version 1 BGP4-MIB Limitations
You may notice incorrect BGP trap OID output when you use the SNMP version 1 BGP4-MIB that is available for download at ftp://ftp.cisco.com/pub/mibs/v1/BGP4-MIB-V1SMI.my. When a router sends BGP traps (notifications) about state changes on an SNMP version 1 monitored BGP peer, the enterprise OID is incorrectly displayed as .1.3.6.1.2.1.15 (bgp) instead of .1.3.6.1.2.1.15.7 (bgpTraps). The problem is not due to any error with Cisco IOS software. This problem occurs because the BGP4-MIB does not follow RFC 1908 rules regarding version 1 and version 2 trap compliance. This MIB is controlled by IANA under the guidance of the IETF, and work is currently in progress by the IETF to replace this MIB with a new version that represents the current state of the BGP protocol. In the meantime, we recommend that you use the SNMP version 2 BGP4-MIB or the CISCO-BGP4-MIB to avoid an incorrect trap OID.
System Limits for Policy Maps on the Cisco 10000 Series
The maximum number of classes supported per policy map on a Cisco 10000 series in Cisco IOS Release 12.2(28)SB is 64. The maximum number of policy maps supported per system is 4096.
tunnel vrf Command Not Supported on the Cisco 10000 Series
The Cisco 10000 series does not support the tunnel vrf vrf-name command in Cisco IOS Release 12.2(28)SB. Therefore, you cannot configure a tunnel for which both the source address and the destination address are located in a VPN routing/forwarding (VRF) instance, for example, when a tunnel is established between a customer edge (CE) router and a provider edge (PE) router. All tunnel source and destination addresses must be located in the global routing table.
The Cisco 10000 series does support a configuration in which the IP address of the tunnel itself is located in a VRF instance, for example, when the tunnel extends a VRF instance from one PE router to another PE router.
Important Notes
The following sections contain important notes about Cisco IOS Release 12.2SB that can apply to the Cisco 7200 series routers, Cisco 7301 router, Cisco 7304 router, and Cisco 10000 series routers.
Deferrals
Cisco IOS software images are subject to deferral. Cisco recommends that you view the deferral notices at the following location to determine if your software release is affected:
http://www.cisco.com/kobayashi/sw-center/sw-ios-advisories.shtml
Cisco IOS Release 12.2(31)SB3 Deferred
Cisco IOS Release 12.2(31)SB3 is deferred and replaced by Cisco IOS Release 12.2(31)SB3x. Release 12.2(31)SB3 is not properly supportable because of severely limited debug capability.
Release 12.2(31)SB3x includes the required debug capability but is otherwise identical to Release 12.2(31)SB3.
We strongly recommend that you remove Release 12.2(31)SB3 and replaced it by Release 12.2(31)SB3x as soon as possible.
Field Notices and Bulletins
•
•
Important Notes for Cisco IOS Release 12.2(33)SB
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SB and later releases.
ATM Virtual Circuits Changed in Virtual Paths
The behavior of ATM virtual circuits (VCs) in virtual paths (VPs) has changed in Cisco IOS Release 12.2(33)SB. Previously, ATM VCs would come up automatically once the VP and associated VCs were configured. Now in Cisco IOS Release 12.2(33)SB, the ATM VCs in a VP only come up if "no-f4-mgmt" is configured on the VP.
Mode Change on an 8-Port E3/DS3 ATM Line Card
The behavior of the 8-Port E3/DS3 ATM line card has changed in Cisco IOS Release 12.2(33)SB. Previously, the mode of an already provisioned card could be changed while the line card was in use. Now in Cisco IOS Release 12.2(33) SB, the line card should first be removed and reprovisioned before the mode is changed.
For detailed information about these commands, see the Cisco 10000 Series Line Card Configuration Guide.
Important Notes for Cisco IOS Release 12.2(31)SB2
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(31)SB2 and later releases.
ARP Commands
As of Cisco IOS Release 12.2(31)SB2, new Address Resolution Protocol (ARP) commands are supported for the Cisco 7200 series, Cisco 7301, and Cisco 7304. For detailed information about these commands, see the Monitoring and Maintaining ARP Information document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiad_c/arp/htarpmon.htm
Detection Mechanism for the MPLS Traffic Engineering (TE)—Fast Reroute (FRR) Node Protection, with RSVP Hellos Support Feature
When the detection mechanism for the MPLS Traffic Engineering (TE)—Fast Reroute (FRR) Node Protection, with RSVP Hellos Support feature is configured with a refresh interval and missed refresh limit that are too short, a neighbor may be declared down while the neighbor is actually up, and a warning message may be generated. To prevent this situation, configure the refresh interval and missed refresh limit in the following ways:
•
•
The detection interval for the detection mechanism should be at least 800 milliseconds (that is, 200 milliseconds of the interval-value argument multiplied by the value 4 of the msg-countip argument) or longer.
NPE-G2 Support for the show environment Command
The output of the show environment command has been modified to support the NPE-G2 network processing engine on the Cisco 7200 VXR in Cisco IOS Release 12.2(31)SB2 and later releases. For detailed information about this command, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124limit/124x/124xd4/
showenv2.htmOutdated ATA ROM Monitor Library (Monlib) [CSCsg64518]
Symptoms: The following symptoms may occur:
•
•
Conditions: These symptoms are observed on a Cisco router that has an ATA file system when the ATA ROM monitor library (Monlib) on the disk for which the dir command is entered or on which the boot image resides is very old. However, the symptoms can also occur because of other software issues or disk related-hardware issues.
Workaround: Upgrade the Monlib of the disk.
Further Problem Description:
To check the Monlib version of the disk, enter the show disk0: filesys command. In the output, look for the details under "ATA MONLIB INFO," as in the following example:
ATA MONLIB INFO
Image Monlib size 69912<-- Look for this information.
Disk Monlib Size 69912
Disk Space Available 73728
Name NA
End Sector NA
Start sector NA
Updated By NA
Version NA <-- Look for this information.
"NA" is very old image. You should see a Cisco IOS version that created the Monlib. The Cisco IOS version can be a good indicator of how old the Monlib is, as in the following example:
ATA MONLIB INFO
Image Monlib size = 67288<--Look for the Cisco IOS software image
Disk monlib size = 70656
Name = c10k-atafslib-m
Monlib Start sector = 2
Monlib End sector = 133
Monlib updated by = C10K2-P11-M12.2(31)SB2
Monlib version = 1 <-- Look for the MONLIB version no.
You can upgrade the Monlib through two methods:
•
There is a reserved space for the Monlib on the disk. If this reserved space is not sufficiently large enough to hold the new Monlib, the upgrade command may fail. (Note that this reserved space is not the disk space and should not be confused with the free space on the disk).
•
QoS CLI Migration from PRE-2 to PRE-3
The Quality of Service (QoS) Command-Line Interface (CLI) Migration from PRE-2 to PRE-3 feature provides QoS CLI backward-compatibility between the Cisco 10000 series PRE-2 and PRE-3, thereby enabling the PRE-3 to accept PRE-2-style commands. For detailed information about this feature, see the following Cisco document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/cli_migr.htm
Valid Ranges for MLP Interfaces on the Cisco 10000 Series
Table 18 lists the valid numerical ranges you can specify on the Cisco 10000 series when creating MLP interfaces using the interface multilink command.
For more information, see the "Configuring Multilink Point-to-Point Protocol Connections on the Cisco 10000 Series" section.
Important Notes for Cisco IOS Release 12.2(28)SB
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(28)SB and later releases.
Configuring Multilink Point-to-Point Protocol Connections on the Cisco 10000 Series
This section provides information about configuring Multilink Point-to-Point (MLP) connections on the Cisco 10000 series.
Configuration Commands for MLP
The following commands can be used to configure MLP and MLP-based link fragmentation and interleaving:
–
When creating MLP interfaces using the interface multilink command, the valid numerical ranges you can specify for the PRE-2 in Cisco IOS Release 12.2(28)SB and its rebuilds are from 1 to 9999.
–
–
–
–
–
–
For more information about MLP-based link fragmentation and interleaving, see the Cisco 10000 Series Router Quality of Service Configuration Guide:
http://www.cisco.com/en/US/docs/routers/10000/10008/configuration/guides/qos/qoscf.html
MLP Overhead
MLP encapsulation adds six extra bytes (4 header, 2 checksum) to each outbound packet. These overhead bytes reduce the effective bandwidth on the connection; therefore, the throughput for an MLP bundle is slightly less than an equivalent bandwidth connection that is not using MLP. If the average packet size is large, the extra MLP overhead is not readily apparent; however, if the average packet size is small, the extra overhead becomes more noticeable.
Using MLP fragmentation adds additional overhead to a packet. Each fragment contains six bytes of MLP header plus a link encapsulation header (for example, a High Level Data Link Control (HDLC) header).
MPLS MTU Command Change
The behavior of the mpls mtu command has changed in Cisco IOS Release 12.2(28)SB and later releases. You cannot set the MPLS MTU value larger than the interface MTU value. This prevents problems such as dropped packets when MPLS MTU value settings are larger than interface MTU values. Cisco IOS software allows the MPLS MTU value to be higher than the interface MTU value only for interfaces that have a default interface MTU value of 1580 or less. For more information, see the following document:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sbc27/newmtu.htm
Tuning I/O Buffers for Nonstop Forwarding (NSF)/Stateful Switchover (SSO) Functionality
For proper Nonstop Forwarding (NSF)/Stateful Switchover (SSO) functionality in scaled configurations, we recommend that you tune the number of I/O buffers on the Cisco 10000 series. (The default I/O buffer settings are good settings for standard configurations.) When NSF/SSO functionality is enabled, tune the I/O buffers by entering the following commands:
•
•
•
•
•
•
•
•
•
For more information about buffer tuning, see the Buffer Tuning for all Cisco Routers document:
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a7b80.shtml
If you need assistance with the buffer tuning process, call your support team.
Upgrading PCI Port Adapter Carrier Card ROMmon for the Cisco 7304 Router
Beginning in Cisco IOS Release 12.2(28)SB, the PCI Port Adapter Carrier Card (7300-CC-PA) requires a one-time ROMmon upgrade to function. If this upgrade is not performed, the PCI Port Adapter Carrier Card with the incompatible ROMmon will be deactivated until the PCI Port Adapter Carrier Card ROMmon upgrade is performed.
The upgraded ROMmon image is bundled with the Cisco IOS software image; no additional images need to be downloaded to perform the upgrade. The upgrade can be performed by answering a prompt that will appear when certain processes, including the Cisco IOS bootup process, recognize that the PA-CC ROMmon requires an upgrade. Other methods of upgrading PA-CC ROMmon exist.
For additional information on this process, see the Upgrading PCI Port Adapter Carrier Card ROMmon document:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/7304swf/paccrom.htm
Troubleshooting
The following documents provide assistance with troubleshooting your Cisco hardware and software:
•
http://www.cisco.com/warp/public/108/index.shtml
•
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800cdd51
.shtml•
http://www.cisco.com/warp/public/63/lose_config_6201.html
•
http://www.cisco.com/warp/public/63/why_hang.html
•
http://www.cisco.com/warp/public/63/mallocfail.shtml
•
http://www.cisco.com/warp/public/63/highcpu.html
•
http://www.cisco.com/warp/public/122/crashes_router_troubleshooting.shtml
•
http://www.cisco.com/warp/public/63/car_rate_limit_icmp.html
Caveats
To reduce the size of these release notes, caveats have been moved to the following locations:
•
•
•
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)