Available Languages

Download Options

PDF (746.3 KB)
View with Adobe Reader on a variety of devices

Updated:January 19, 2018

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

How to Access Cisco Vision Director

Quick Facts

Task

How to Access Cisco Vision Director

Revised: January 19, 2018

Software Release: 3.0 and Later Releases

Quick Facts

■You can use an Apple Mac or Microsoft Windows PC or laptop using a supported browser to access Cisco Vision Director.

For the latest information about hardware and software requirements, such as browser requirements for your software release, see the corresponding Release Notes for your software release at: http://www.cisco.com/en/US/products/ps11274/prod_release_notes_list.html

■If you leave a session idle for 30 minutes it will timeout.

Task

To access Cisco Vision Director:

1. Using a supported browser version, open a browser window and type the URL for the Cisco Vision Director server in the following sample format, where ip-address is the IPv4 address of the Cisco Vision Director server:

https:// ip-address

http:// ip-address

2. Log into Cisco Vision Director with your account information. Type the account Username and Password in the corresponding boxes and click Log In.

3. If this is the first time that you are logging in, or your administrator has configured a request for reset, you may be asked to change your password. Type your current password in the first box, and then type your new password in the next two boxes for confirmation of syntax. Click Save.

4. From the Main Menu, click the icon to go to a specific application area.

If you are using legacy flash applications, a new window opens displaying the software area that you selected.

If you are using newer or HTML applications, no window opens.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2012 - 2018 Cisco Systems, Inc. All rights reserved.