Introduction

This article aims to provide a "what's in the box?" style product specifications about the RV340 Dual-WAN VPN Router. For a more in depth look, click here to view the RV34X series consolidated Data Sheet.

The RV340 Dual-WAN VPN Router is an easy-to-use, flexible, high-performance device well suited for small businesses. With added security features, such as Web Filtering, Application Control, and IP Source Guard, the new RV340 delivers highly secure, broadband, wired connectivity to small offices and remote employees. These new security features also provide the ease of fine tuning permitted activity on the network.

Note: To view a "back of the box" style article about the RV340 Dual-WAN VPN Router, click here.

Product Features

- Application control to secure your network through sets of application policies

- Web filtering to guard against malicious or non-work related websites. Filtering more than 27 billions URLs.

- Content filtering to restrict access to certain websites.

- Teleworker Client for the on-the-go worker.

- IP Security (IPsec) site-to-site VPN helps enables secure connectivity for remote employees and multiple offices.

- Strong security: Proven stateful packet inspection (SPI) firewall and hardware encryption.

- Dual WAN ports

- Dual USB ports for backup and restore, and for 3G/4G modem failover or alternative primary connectivity.

- High-performance Gigabit Ethernet ports, enabling large file transfers and multiple users.

- Simple installation and intuitive web-based utility

- FindIT Network Management Support

- Industry-leading support

Package Contents

a)                 b)

c)                                        d)

e)                                        f)

g)                                    h)

i)

a) RV340 Dual-WAN VPN Router

b) Ethernet cable

c) Quick Start Guide

d) Power Adapter

e) Console Cable

f) 2 Mount-rack Brackets

g) 8 mounting screws

h) Anchors and Screws

i) Foam Pads

Minimum Requirements

- A switch or router that has PoE support, PoE injector, or AC power adapter

- Java-enabled web browser for the web-based configuration

Default Settings

Parameter

Default Value

Username

cisco

Password

cisco

LAN IP Address

192.168.1.1

Fallback LAN IP

192.168.1.1

Subnetwork Mask

255.255.255.0

Product Views

Front Panel View

The front panel shows the model number, the Reset button and several LEDs for Power, VPN, Diagnostics, LAN, WAN, and USB.

Back Panel View

The back panel shows the USB 1 port, WAN ports 1 and 2, LAN ports 1 to 4, console port, On and Off switch, and the 12VDC 2.5A power adapter port.

Right Side Panel View

The right side panel shows the second USB port.

Technical Details

Status LEDs

This LED indicates the status of the device depending on what state it is in.

Function

LED Name

LED Behavior

LINK/ACT and Speed

Top LED

LAN1-4

GREEN

OFF – No link is detected

Blinking – Link is detected, Rx/TX Data

GIGABIT

Bottom LED

LAN1-4

GREEN

OFF – 10 M/100 M link is detected or no link

Solid – 1000 M link is detected

Power

PWR

GREEN

OFF – Device is powered OFF.

Solid – Powered ON and booted.

Blinking – Booting

DMZ

DMZ

GREEN

OFF – Device is OFF or DMZ is disabled.

Solid – DMZ is enabled.

VPN

VPN LED

GREEN

OFF – No power or no VPN tunnel has been defined or all VPN tunnels have been disabled.

Solid – At least one VPN tunnel is up.

Blinking – Rx/TX Data

Amber

Solid – No enabled VPN is up.

Diagnostic

DIAG

RED

OFF – No power or about to boot.

Slow blinking – Firmware is upgrading.

Fast blinking – The firmware upgrading is failing.

Solid – System has failed to boot with both active and inactive firmware images or in rescue mode.

USB

USB 1 and USB 2

GREEN

OFF – No power or no USB detected, or USB connected but not recognized.

Solid – USB is connected to the ISP and USB is recognized.

Blinking – Rx/TX Data

Note: To know more about the product specifications of the RV340, click here.

Related Content

- Configure Power over Ethernet (PoE) Settings on the RV345P Router

- Configure Application Control on the RV34x Series Router

- Configure Content Filter on the RV34x Series Router

- Configure IP Source Guard on the RV34x Series Router

- Configure System Log Settings on the RV34x Series Router

- Manage Schedules on the RV34x Series Router

View a video related to this article...

Click here to view other Tech Talks from Cisco