Field Notice: FN - 70622 - Certain NCS 6000 Linecards Are Not Supported With Software Releases Earlier Than Cisco IOS XR 7.0.1 or Without the Mandatory SMU - Software Upgrade Recommended

Notice

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Revision History

Revision	Publish Date	Comments
1.0	23-Oct-20	Initial Release

Products Affected

Affected Product ID	Comments
NC6-20X100GE-L-C=	Part Alternate
NC6-20X100GE-L-C
NC6-20X100GE-M-C=	Part Alternate
NC6-20X100GE-M-C

Defect Information

Defect ID	Headline
CSCvo35085	SOC property changes for new GDDR5 devices

Problem Description

Network Convergence System (NCS) 6000 linecards, as mentioned in the Products Affected section, are not compatible with Cisco IOS^® XR software releases earlier than 7.0.1 or without the mandatory Software Maintenance Upgrade (SMU).

Background

A new hardware version for the products will be introduced to address the End of Life (EoL) of an existing memory component. This version will be supported by Cisco IOS XR Software Release 7.0.1 or later only.

For software releases earlier than 7.0.1, a mandatory restart/reload SMU needs to be installed.

Problem Symptom

The NCS 6000 linecards might observe traffic issues when they operate with a noncompatible Cisco IOS XR software release or without the mandatory SMU since certain settings are not aligned for earlier releases.

Workaround/Solution

The NCS 6000 linecards which run on Cisco IOS XR software releases earlier than 7.0.1 require one of these options in order to support the new hardware version.

Option 1. Install the SMUs

SMU Requirements

Cisco IOS XR Software Release	Required SMU File Names
6.2.2	ncs6k-sysadmin-6.2.2.CSCvo35085.tar (restart)	ncs6k-6.2.2.CSCvo35085.tar (restart)
6.2.3	ncs6k-sysadmin-6.2.3.CSCvo35085.tar (restart)	ncs6k-6.2.3.CSCvo35085.tar (reload)
6.3.3	ncs6k-sysadmin-6.3.3.CSCvo35085.tar (restart)	ncs6k-6.3.3.CSCvo35085.tar (reload)
6.4.2	ncs6k-sysadmin-6.4.2.CSCvo35085.tar (restart)	ncs6k-6.4.2.CSCvo35085.tar (restart)
6.6.1	ncs6k-sysadmin-6.6.1.CSCvo35085.tar (restart)	ncs6k-6.6.1-CSCvo35085.tar (reload)

 

Option 2. Upgrade

Cisco IOS XR software can be migrated to one of the latest Cisco IOS XR software releases, 7.0.1 or later. These releases do not require any of the SMUs.

See the NCS 6000 Software Download Page for the latest software releases.

How To Identify Affected Products

Refer to this table in order to find the affected Version ID (VID). The VID can be identified through the CLI or physically on the linecard label.

Product ID (PID)	Version ID (VID)
NC6-20X100GE-L-C	V03 or later
NC6-20X100GE-L-C=	V03 or later
NC6-20X100GE-M-C	V03 or later
NC6-20X100GE-M-C=	V03 or later

 

Enter the show inventory command in order to view the VID. The output appears in the format as shown in this example:

show inventory


NAME: "0/7", DESCR: "NCS6000 20x100GE MS Linecard Combo Optics"

PID: NC6-20X100GE-M-C  , VID: V01, SN: CAT12345678



NAME: "0/7-PORT-0", DESCR: "CPAK 10x10G LR10 Transceiver Module"

PID: CPAK-10X10G-LR    , VID: V01 , SN: FBN12345678



NAME: "0/7-PORT-1", DESCR: "CPAK 10x10G LR10 Transceiver Module"

PID: CPAK-10X10G-LR    , VID: V01 , SN: FBN12345678

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

• Open a service request on Cisco.com
• By email or telephone

Receive Email Notification For New Field Notices

My Notifications—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.